
sem

chemia

tem
Publikacje naukowe
Najnowsze publikacje naukowe w czasopismach i materiały z konferencji w których brali udział pracownicy Laboratorium:
- Morawiec, M., Opara, J., Garcia-Mateo, C. et al. Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys. J Therm Anal Calorim (2022). https://doi.org/10.1007/s10973-022-11664-2
- Morawiec, M., Ruiz-Jimenez, V., Garcia-Mateo, C. et al. Study of the isothermal bainitic transformation and austenite stability in an advanced Al-rich medium-Mn steel. Archiv.Civ.Mech.Eng 22, 152 (2022). https://doi.org/10.1007/s43452-022-00475-9
- Reimann, L.; Brytan, Z.; Jania, G. Influence of Filler Metal on Electrochemical Characteristics of a Laser-Welded CoCrMoW Alloy Used in Prosthodontics. Materials 2022, 15, 5721. https://doi.org/10.3390/ma15165721
- Skowronek, A., Grajcar, A., Kozłowska, A. et al. Temperature-Dependent Microstructural Evolution of Al-Rich Medium-Mn Steel During Intercritical Annealing. Metall Mater Trans A 53, 3012–3021 (2022). https://doi.org/10.1007/s11661-022-06721-2
- Kania, A.; Cesarz-Andraczke, K.; Brytan, Z.; Reimann, Ł.; Smolarczyk, P. The Influence of Casein Coatings on the Corrosion Behavior of Mg-Based Alloys. Materials 2022, 15, 1399. https://doi.org/10.3390/ma15041399
- Staszuk, M.; Reimann, Ł.; Pakuła, D.; Pawlyta, M.; Musztyfaga-Staszuk, M.; Czaja, P.; Beneš, P. Investigations of TiO2/NanoTiO2 Bimodal Coatings Obtained by a Hybrid PVD/ALD Method on Al-Si-Cu Alloy Substrate. Coatings 2022, 12, 338. https://doi.org/10.3390/coatings12030338
- Adamska K., Smykała S., Zieliński S., Szymański D., Hojeńska A., Stelmachowski P., Kotarba A., Okal J.: Oxidation of soot over supported RuRe nanoparticles prepared by the microwave-polyol method, Reaction Kinetics Mechanisms and Catalysis, vol. 134, 2021, s. 221-242, DOI:10.1007/s11144-021-02048-y, 40 punktów
- Antonowicz M., Szewczenko J., Jaworska J., Jelonek K., Joszko K., Gzik-Zroska B., Nuckowski P., Bryniarski P., Paszenda Z., Nakonieczny D.: Functional properties of polyurethane ureteral stents with PLGA and papaverine hydrochloride coating, International Journal of Molecular Sciences, vol. 22, nr 14, 2021, s. 1-12, DOI:10.3390/ijms22147705, 140 punktów
- Babilas R., Młynarek K., Łoński W., Lis M., Łukowiec D., Kądziołka-Gaweł M., Warski T., Radoń A.: Analysis of thermodynamic parameters for designing quasicrystalline Al-Ni-Fe alloys with enhanced corrosion resistance, Journal of Alloys and Compounds, vol. 868, 2021, s. 1-18, DOI:10.1016/j.jallcom.2021.159241, 100 punktów
- Babilas R., Spilka M., Młynarek K., Łoński W., Łukowiec D., Radoń A., Kądziołka-Gaweł M., Gębara P.: Glass-forming ability and corrosion resistance of Al88Y8-xFe4+x(x = 0, 1, 2 at.%) alloys, Materials, MDPIAG, vol. 14, nr 7, 2021, s. 1-12, DOI:10.3390/ma14071581, 140 punktów
- Babilas R., Młynarek K., Łoński W., Łukowiec D., Kądziołka-Gaweł M., Czeppe T., Temleitner L.: Structural characterization of Al65Cu20Fe15melt-spun alloy by X-ray, neutron diffraction, high-resolution electron microscopy and Mossbauer spectroscopy, Materials, MDPIAG, vol. 14, nr 1, 2021, s. 1-11, DOI:10.3390/ma14010054, 140 punktów
- Belles L., Moularas C., Smykała S., Deligiannakis Y.: Flame spray pyrolysis Co3O4/CoO as highly-efficient nanocatalyst for oxygen reduction reaction, Nanomaterials, vol. 11, nr 4, 2021, s. 1-18, DOI:10.3390/nano11040925, 100 punktów
- Bialas O., Skowronek A., Adamiak M.: Jakość obserwacji mikroskopowych w funkcji czasu trawienia z zastosowaniem mikroskopii świetlnej i konfokalnej, LAB – Laboratoria, Aparatura, Badania, Roble Sp. z o.o., nr 3, 2021, s. 31-34, 5 punktów
- Bialas O., Poloczek T., Lis M., Skowronek A., Górka J., Adamiak M.: Laser assisted size reduction of gold (Au) particles onto a titanium (Ti) substrate surface, Applied Sciences-Basel, MDPI, vol. 11, nr 18, 2021, s. 1-13, DOI:10.3390/app11188755, 100 punktów
- Bialas O., Lis M., Woźniak A., Adamiak M.: Laser superficial fusion of gold nanoparticles with PEEK polymer for cardiovascular application, Materials, MDPIAG, vol. 14, nr 4, 2021, s. 1-13, DOI:10.3390/ma14040971, 140 punktów
- Biedunkiewicz A., Figiel P., Garbiec D., Obrosov A., Pawlyta M., Biedunkiewicz W., Pruss P., Rokosz K., Wróbel R., Raaen S.: Influence of elemental carbon (EC) coating covering nc-(Ti,Mo)C particles on the microstructure and properties of titanium matrix composites prepared by reactive spark plasma sintering, Materials, MDPIAG, vol. 14, nr 1, 2021, s. 1-21, DOI:10.3390/ma14010231, łączna liczba autorów: 12, 140 punktów
- Bonarowska M., Kaszkur Z., Matus K., Drelinkiewicz A., Szumełda T., Kubas A.: Towards high efficacy of Pd-Au/C catalyst for tetrachloromethane hydrodechlorination, Chemistry-Switzerland, MDPI, vol. 3, nr 1, 2021, s. 338-359, DOI:10.3390/chemistry3010025, 20 punktów
- Dobrzańska J., Dobrzański L., Dobrzański L., Gołombek K., Dobrzańska-Danikiewicz A.: Is gutta-percha still the gold standard among filling materials in endodontic treatment?, Processes, MDPI, vol. 9, nr 8, 2021, s. 1-51, DOI:10.3390/pr9081467, 70 punktów
- Dobrzańska J., Dobrzański L., Gołombek K., Dobrzański L., Dobrzańska-Danikiewicz A.: Virtual approach to the comparative analysis of biomaterials used in endodontic treatment, Processes, MDPI, vol. 9, nr 6, 2021, s. 1-48, DOI:10.3390/pr9060926, 70 punktów
- Dobrzański L., Dobrzańska J., Dobrzański L., Dobrzańska-Danikiewicz A., Gołombek K.: Development strategy of endodontic filling materials based on engineering and medical approaches, Processes, MDPI, vol. 9, nr 11, 2021, s. 1-42, DOI:10.3390/pr9112014, 70 punktów
- Dziewięcka M., Pawlyta M., Majchrzycki Ł., Balin K., Barteczko S., Czerkawska M., Augustyniak M.: The structure-properties-cytotoxicity interplay: A crucial pathway to determining graphene oxide biocompatibility, International Journal of Molecular Sciences, vol. 22, nr 10, 2021, s. 1-23, DOI:10.3390/ijms22105401, 140 punktów
- Fernandez-Ropero A., Zawadzki B., Kowalewski E., Pieta I., Kowalczyk M., Matus K., Lisovytskiy D., Śrębowata A.: Continuous 2-methyl-3-butyn-2-ol selective hydrogenation on Pd/γ-Al2O3 as a green pathway of vitamin a precursor synthesis, Catalysts, vol. 11, nr 4, 2021, s. 1-19, DOI:10.3390/catal11040501, 100 punktów
- Franke D., Suponik T., Nuckowski P., Dubaj J.: Evaluation of the efficiency of metal recovery from printed circuit boards using gravity processes, Physicochemical Problems of Mineral Processing, vol. 57, nr 4, 2021, s. 63-77, DOI:10.37190/ppmp/138471, 70 punktów
- Golda-Cepa M., Pajerski W., Duch J., Jarosz M., Indyka P., Pawlyta M., Ochońska D., Brzychczy-Włoch M., Sojka Z., Kotarba A.: Innovative method for the preparation of catalytic surfaces: The application of microorganisms for the deposition of nanoparticles on supports, Applied Surface Science, Elsevier BV – North-Holland, vol. 553, 2021, s. 1-9, DOI:10.1016/j.apsusc.2021.149573, 140 punktów
- Grabowski A., Florian T., Wieczorek J., Adamiak M.: Structuring of the Ti6Al4V alloy surface by pulsed laser remelting, Applied Surface Science, Elsevier BV – North-Holland, vol. 535, 2021, s. 1-9, DOI:10.1016/j.apsusc.2020.147618, 140 punktów
- Grajcar A., Skowronek A., Morawiec M.: Processing strategies for hot-rolled medium-Mn steels, Materials Science Forum, Trans Tech Publications Ltd., vol. 1016, 2021, s. 132-136, DOI:10.4028/www.scientific.net/MSF.1016.132, 20 punktów
- Hajduk B., Jarka P., Bednarski H., Tański T., Woźniak A.: Optyczna spektroskopia podczerwieni cienkich warstw FTIR – podstawy identyfikacji widm poliazometin, LAB – Laboratoria, Aparatura, Badania, Roble Sp. z o.o., nr 3, 2021, s. 48-51, 5 punktów
- Havelka O., Cvek M., Urbanek M., Łukowiec D., Jasíkova D., Kotek M., Cerník M., Amendola V., Torres-Mendieta R.: On the use of laser fragmentation for the synthesis of ligand-free ultra-small iron nanoparticles in various liquid environments, Nanomaterials, vol. 11, nr 6, 2021, s. 1-14, DOI:10.3390/nano11061538, 100 punktów
- Jagódka P., Matus K., Sobota M., Łamacz A.: Dry reforming of methane over carbon fibre-supported CeZrO2, Ni-CeZrO2, Pt-CeZrO2and Pt-Ni-CeZrO2catalysts, Catalysts, vol. 11, nr 5, 2021, s. 1-21, DOI:10.3390/catal11050563, 100 punktów
- Jonczy I., Wieczorek A., Filipowicz K., Mucha K., Kuczaj M., Pawlikowski A., Nuckowski P., Pieczora E.: Impact identification of carbon-containing carboniferous clays on surfaces of friction nodes, Energies, vol. 14, nr 5, 2021, s. 1-17, DOI:10.3390/en14051422, 140 punktów
- Kowalewski E., Krawczyk M., Słowik G., Kocik J., Pieta I., Chernyayeva O., Lisovytskiy D., Matus K., Śrębowata A.: Continuous-flow hydrogenation of nitrocyclohexane toward value-added products with CuZnAl hydrotalcite derived materials, Applied Catalysis A-General, Elsevier BV, vol. 618, 2021, DOI:10.1016/j.apcata.2021.118134, 100 punktów
- Kowalewski E., Zawadzki B., Matus K., Nikiforov K., Śrębowata A.: Continuous-fow hydrogenation over resin supported palladium catalyst for the synthesis of industrially relevant chemicals, Reaction Kinetics Mechanisms and Catalysis, vol. 32, 2021, s. 717-728, DOI:10.1007/s11144-020-01922-5, 40 punktów
- Kozłowska A., Grajcar A., Janik A., Radwański K., Krupp U., Matus K., Morawiec M.: Mechanical and thermal stability of retained austenite in plastically-deformed bainite-based TRIP-aided medium-Mn steels, Archives of Civil and Mechanical Engineering, vol. 21, nr 3, 2021, s. 1-14, DOI:10.1007/s43452-021-00284-6, 140 punktów
- Kozłowska A., Radwański K., Matus K., Samek L., Grajcar A.: Mechanical stability of retained austenite in aluminum-containing medium-Mn steel deformed at diferent temperatures, Archives of Civil and Mechanical Engineering, vol. 21, nr 1, 2021, s. 1-15, DOI:10.1007/s43452-021-00177-8, 140 punktów
- Ledwa K., Kępiński L., Pawlyta M.: Regenerability of complex (PdO)xPd05–xCe0.95O2-ycatalyst stabilized on functionalized alumina surface, Materials Research Bulletin, vol. 141, 2021, s. 1-14, DOI:10.1016/j.materresbull.2021.111357, 100 punktów
- Lesz S., Hrapkowicz B., Karolus M., Gołombek K.: Characteristics of the Mg-Zn-Ca-Gd alloy after mechanical alloying, Materials, MDPIAG, vol. 14, nr 1, 2021, s. 1-14
- Lesz S., Kwapuliński P., Karolus M., Gołombek K., Hrapkowicz B., Zarychta A., Babilas R., Popis J., Janiak P.: Structure and magnetic properties of Fe-B-La-Al alloy, Magnetochemistry, M D P I AG, vol. 7, nr 9, 2021, s. 1-13, DOI:10.3390/magnetochemistry7090129, 20 punktów
- Lesz S., Hrapkowicz B., Gołombek K., Karolus M., Janiak P.: Synthesis of Mg-based alloys with a rare-earth element addition by mechanical alloying, Bulletin of the Polish Academy of Sciences, Technical Sciences, PAN, vol. 69, nr 5, 2021, s. 1-7, DOI:10.24425/bpasts.2021.137586, 100 punktów
- Łosiewicz B., Stróż A., Osak P., Maszybrocka J., Gerle A., Dudek K., Balin K., Łukowiec D., Gawlikowski M., Bogunia S.: Production, characterization and application of oxide nanotubes on Ti-6Al-7Nb alloy as a potential drug carrier, Materials, MDPIAG, vol. 14, nr 20, 2021, s. 1-23, DOI:10.3390/ma14206142, 140 punktów
- Krzywiecki M., Pluczyk-Małek S., Powroźnik P., Ślusarczyk C., Król-Molenda W., Smykała S., Kurek J., Koptoń P., Łapkowski M., Blacha-Grzechnik A.: Chemical and electronic structure characterization of electrochemically deposited nickel tetraamino-phthalocyanine: a step toward more efficient deposition techniques for organic electronics application, The Journal of Physical Chemistry Part C: Nanomaterials, Interfaces and Hard Matter, American Chemical Society, vol. 125, nr 24, 2021, s. 13542-13550, DOI:10.1021/acs.jpcc.1c01396, 140 punktów
- Maj I., Kalisz S., Szymajda A., Łaska G., Gołombek K.: The influence of cow dung and mixed straw ashes on steel corrosion, Renewable Energy, vol. 177, 2021, s. 1198-1211, DOI:10.1016/j.renene.2021.06.019, 140 punktów
- Matula G., Szatkowska A., Matus K., Tomiczek B., Pawlyta M.: Structure and properties of Co-Cr-Mo alloy manufactured by powder injection molding method, Materials, MDPIAG, vol. 14, nr 8, 2021, s. 1-13, DOI:10.3390/ma14082010, 140 punktów
- Matusiak P., Kowol D., Suponik T., Franke D., Nuckowski P., Tora B., Pomykała R.: Selective crushing of run-of-mine as an important part of the hard coal beneficiation process, Energies, vol. 14, nr 11, 2021, s. 1-15, DOI:10.3390/en14113167, 140 punktów
- Mikuła J., Pakuła D., Żukowska L., Gołombek K., Kriz A.: Wear resistance of (Ti,Al)N metallic coatings for extremal working conditions, Coatings, vol. 11, nr 2, 2021, s. 1-10, DOI:10.3390/coatings11020157, 100 punktów
- Morawiec M., Wojtacha A., Opiela M.: Kinetics of austenite phase transformations in newly-developed 0.17C-2Mn-1Si-0.2Mo forging steel with Ti and V microadditions, Materials, MDPIAG, vol. 14, nr 7, 2021, s. 1-12, DOI:10.3390/ma14071698, 140 punktów
- Morawiec M., Grajcar A.: Strain rate dependent mechanical stability of retained austenite in hot-rolled medium-Mn sheet steels, Materials Science Forum, Trans Tech Publications Ltd., vol. 1016, 2021, s. 946-951, DOI:10.4028/www.scientific.net/MSF.1016.946, 20 punktów
- Mrówka M., Szymiczek M., Machoczek T., Pawlyta M.: Influence of the halloysite nanotube (HNT) addition on selected mechanical and biological properties of thermoplastic polyurethane, Materials, MDPIAG, vol. 14, nr 13, 2021, s. 1-15, DOI:10.3390/ma14133625, 140 punktów
- Mrówka M., Woźniak A., Prężyna S., Sławski S.: The influence of zinc waste filler on the tribological and mechanical properties of silicone-based composites, Polymers, vol. 13, nr 4, 2021, s. 1-15, DOI:10.3390/polym13040585, 100 punktów
- Nakonieczny D., Kern F., Dufner L., Antonowicz M., Matus K.: Alumina and zirconia-reinforced polyamide PA-12 composites for biomedical additive manufacturing, Materials, MDPIAG, vol. 14, nr 20, 2021, s. 1-21, DOI:10.3390/ma14206201, 140 punktów
- Nakonieczny D., Kern F., Dufner L., Dubiel A., Antonowicz M., Matus K.: Effect of calcination temperature on the phase composition, morphology, and thermal properties of ZrO2and Al2O3modified with APTES (3-aminopropyltriethoxysilane), Materials, MDPIAG, vol. 14, nr 21, 2021, s. 1-14, DOI:10.3390/ma14216651, 140 punktów
- Oleszak D., Pawlyta M., Pikula T.: Influence of powder milling and annealing parameters on the formation of cubic Li7La3Zr2O12 compound, Materials, MDPIAG, vol. 14, nr 24, 2021, s. 1-10, DOI:10.3390/ma14247633, 140 punktów
- Piotrowski K., Sakiewicz P., Gołombek K.: Halloysite as main nanostructural filler in multifunctional mixed matrix membranes – review of applications and new possibilities, Desalination and Water Treatment, Taylor & Francis, vol. 243, 2021, s. 91-106, DOI:10.5004/dwt.2021.27873, 100 punktów
- Radoń A., Kądziołka-Gaweł M., Łukowiec D., Gębara P., Cesarz-Andraczke K., Kolano-Burian A., Włodarczyk P., Polak M., Babilas R.: Influence of magnetite nanoparticles shape and spontaneous surface oxidation on the electron transport mechanism, Materials, MDPIAG, vol. 14, nr 18, 2021, s. 1-17, DOI:10.3390/ma14185241, 140 punktów
- Radoń A., Łukowiec D., Włodarczyk P.: Ultraslow electron-phonon scattering and polaron formation in magnetite, Journal of Materiomics, Chinese Ceramic Society, vol. in press, 2021, s. 1-6, DOI:10.1016/j.jmat.2021.04.008, 140 punktów
- Russo C., Pawlyta M., Tomiczek A., Ciajolo A., Apicella B.: On the application of EELS for investigating nanostructure of soot from different fuels, Fuels, vol. 2, nr 3, 2021, s. 367-375, DOI:10.3390/fuels2030021, 5 punktów
- Silvestri D., Krawczyk K., Pawlyta M., Krzywiecki M., Padil V., Torres-Mendieta R., Ghanbari F., Dinc O., Cernik M., Dionysiou D.: Influence of catalyst zeta potential on the activation of persulfate, Chemical Communications, RSC Publications, vol. 57, nr 63, 2021, s. 7814-7817, DOI:10.1039/d1cc01946e, łączna liczba autorów: 11, 200 punktów
- Silvestri D., Wacławek S., Sobel B., Torres-Mendieta R., Pawlyta M., Padil V., Filip J., Cernik M.: Modification of nZVI with a bio-conjugate containing amine and carbonyl functional groups for catalytic activation of persulfate, Separation and Purification Technology, Pergamon, vol. 255, 2021, s. 1-11, 140 punktów
- Snopiński P., Król M., Wróbel T., Matus K., Woźniak A., Tański T., Palcek P.: Effects of modifying the hypoeutectic AlMg5Si2Mn alloy via addition of Al10Sr and/or Al5TiB, Archives of Civil and Mechanical Engineering, vol. 21, 2021, s. 1-16, DOI:10.1007/s43452-020-00147-6, 140 punktów
- Snopiński P., Woźniak A., Pagac M.: Microstructural evolution, hardness, and strengthening mechanisms in SLM AlSi10Mg alloy subjected to equal-channel angular pressing (ECAP), Materials, MDPIAG, vol. 14, nr 24, 2021, s. 1-15, DOI:10.3390/ma14247598, 140 punktów
- Snopiński P., Donic T., Tański T., Matus K., Hadzima B., Bastovansky R.: Ultrasound effect on the microstructure and hardness of AlMg3 alloy under upsetting, Materials, MDPIAG, vol. 14, nr 4, 2021, s. 1-13, DOI:10.3390/ma14041010, 140 punktów
- Staszuk M., Reimann Ł., Ściślak A., Jaworska J., Pawlyta M., Mikuszewski T., Kuc D., Tański T., Kriz A.: Investigations of TiO2, Ti/TiO2, and Ti/TiO2/Ti/TiO2coatings produced by ALD and PVD methods on Mg-(Li)-Al-RE alloys substrates, Bulletin of the Polish Academy of Sciences, Technical Sciences, PAN, vol. 69, nr 5, 2021, s. 1-10, DOI:10.24425/bpasts.2021.137549, 100 punktów
- Staszuk M., Pakuła D., Reimann Ł., Kloc-Ptaszna A., Pawlyta M., Kriz A.: Structure and properties of TiO2/nanoTiO2 bimodal coatings obtained by a hybrid PVD/ALD method on 316L steel substrate, Materials, MDPIAG, vol. 14, nr 16, 2021, s. 1-21, DOI:10.3390/ma14164369, 140 punktów
- Suponik T., Franke D., Nuckowski P., Matusiak P., Kowol D., Tora B.: Impact of grinding of printed circuit boards on the efficiency of metal recovery by means of electrostatic separation, Minerals, vol. 11, nr 3, 2021, s. 1-21, DOI:10.3390/min11030281, 100 punktów
- Szklarek R., Tański T., Mendala B., Staszuk M., Krzemiński Ł., Nuckowski P., Sobczak K.: High temperature resistance of silicide-coated niobium, Bulletin of the Polish Academy of Sciences, Technical Sciences, PAN, vol. 69, nr 5, 2021, s. 1-8, DOI:10.24425/bpasts.2021.137416, 100 punktów
- Woźniak A., Adamiak M.: Mikroobróbka laserowa, LAB – Laboratoria, Aparatura, Badania, Roble Sp. z o.o., nr 2, 2021, s. 45-50, 5 punktów
- Woźniak A., Staszuk M., Reimann Ł., Bialas O., Brytan Z., Voinarovych S., Kyslytsia O., Kaliuzhnyi S., Basiaga M., Adamiak M.: The influence of plasma-sprayed coatings on surface properties and corrosion resistance of 316L stainless steel for possible implant application, Archives of Civil and Mechanical Engineering, vol. 21, nr 4, 2021, s. 1-21, DOI:10.1007/s43452-021-00297-1, 140 punktów
- Woźniak A., Walke W., Jakóbik-Kolon A., Ziębowicz B., Brytan Z., Adamiak M.: The influence of ZnO oxide layer on the physicochemical behavior of Ti6Al4V titanium alloy, Materials, MDPIAG, vol. 14, nr 1, 2021, s. 1-19, DOI:10.3390/ma14010230, 140 punktów
- Ziębowicz A., Sambok-Kiełbowicz A., Walke W., Mzyk A., Kosiel K., Kubacki J., Bączkowski B., Pawlyta M., Ziębowicz B.: Evaluation of bacterial adhesion to the ZrO2atomic layer deposited on the surface of cobalt-chromium dental alloy produced by DMLS method, Materials, MDPIAG, vol. 14, nr 5, 2021, s. 1-15, DOI:10.3390/ma14051079, 140 punktów