Title	Authors	Year	Journal	DOI
Experimental and numerical research on the effect of the inlet steam superheat degree on the spontaneous condensation in the IWSEP nozzle	Zhang, G.| Dykas, S.| Majkut, M.| Smołka, K.| Cai, X.	2021	International Journal of Heat and Mass Transfer	10.1016/j.ijheatmasstransfer.2020.120654
Body Pose Prediction Based on Motion Sensor Data and Recurrent Neural Network	Wozniak, M.| Wieczorek, M.| Silka, J.| Polap, D.	2021	IEEE Transactions on Industrial Informatics	10.1109/TII.2020.3015934
Acoustic radiation-based optimization of the placement of actuators for active control of noise transmitted through plates	Wrona, S.| Pawelczyk, M.| Cheer, J.	2021	Mechanical Systems and Signal Processing	10.1016/j.ymssp.2020.107009
Effects of the sources of calcium and phosphorus on the structural and functional properties of ceramic coatings on titanium dental implants produced by plasma electrolytic oxidation	Kyrylenko, S.| Warchoł, F.| Oleshko, O.| Husak, Y.| Kazek-Kęsik, A.| Korniienko, V.| Deineka, V.| Sowa, M.| Maciej, A.| Michalska, J.| Jakóbik-Kolon, A.| Matuła, I.| Basiaga, M.| Hulubnycha, V.| Stolarczyk, A.| Pisarek, M.| Mishchenko, O.| Pogorielov, M.| Simka, W.	2021	Materials Science and Engineering C	10.1016/j.msec.2020.111607
Methods for assessing the subject’s multidimensional psychophysiological state in terms of proper rehabilitation	Mańka, A.| Romaniszyn, P.| Bugdol, M.N.| Mitas, A.W.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_17
Effect of the mechanical properties of carbon-based coatings on the mechanics of cell–material interactions	Trembecka-Wójciga, K.| Kopernik, M.| Surmiak, M.| Major, R.| Gawlikowski, M.| Bruckert, F.| Kot, M.| Lackner, J.M.	2021	Colloids and Surfaces B: Biointerfaces	10.1016/j.colsurfb.2020.111359
A Comprehensive Analysis of Error Sources in Electronic Fully Digital Impedance Bridges	Ortolano, M.| Marzano, M.| D'Elia, V.| Mai Tran, N.T.| Rybski, R.| Kaczmarek, J.| Kozioł, M.| Musioł, K.| Christensen, A.E.| Callegaro, L.| Kucera, J.| Power, O.	2021	IEEE Transactions on Instrumentation and Measurement	10.1109/TIM.2020.3034115
Assessing mma welding process stability using machine vision-based arc features tracking system	Jamrozik, W.| Górka, J.	2021	Sensors (Switzerland)	10.3390/s21010084
The friction and wear behaviour of in-situ titanium carbide reinforced composite layers manufactured on ductile cast iron by laser surface alloying	Janicki, D.	2021	Surface and Coatings Technology	10.1016/j.surfcoat.2020.126634
Methods of therapy of scoliosis and technical functionalities of disc4spine (d4s) diagnostic and therapeutic system	Szurmik, T.| Bibrowicz, K.| Lipowicz, A.| Mitas, A.W.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_16
Multimodal signal acquisition for pain assessment in physiotherapy	Badura, A.| Bieńkowska, M.| Masłowska, A.| Czarlewski, R.| Myśliwiec, A.| Pietka, E.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_18
Steel production, consumption and foreign trade in poland in crises: The financial crisis 2008-2009 and the covid-19 crisis – first half of 2020	Gajdzik, B.	2021	Metalurgija	-
Investigations of the high-performance source of digitally synthesized sinusoidal voltage for primary impedance metrology	Kampik, M.| Musioł, K.	2021	Measurement: Journal of the International Measurement Confederation	10.1016/j.measurement.2020.108308
The classifier algorithm for recognition of basic driving scenarios	Doniec, R.| Sieciński, S.| Piaseczna, N.| Mocny-Pachońska, K.| Lang, M.| Szymczyk, J.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_28
Behavioral and physiological profile analysis while exercising—case study	Romaniszyn, P.| Kania, D.| Bugdol, M.N.| Pollak, A.| Mitas, A.W.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_13
Enhanced massivity index based on evidence from case studies: Towards a robust pre-design assessment of early-age thermal cracking risk and practical recommendations	Kanavaris, F.| Jędrzejewska, A.| Sfikas, I.P.| Schlicke, D.| Kuperman, S.| Šmilauer, V.| Honório, T.| Fairbairn, E.M.R.| Valentim, G.| Funchal de Faria, E.| Azenha, M.	2021	Construction and Building Materials	10.1016/j.conbuildmat.2020.121570
Red fox optimization algorithm	Połap, D.| Woźniak, M.	2021	Expert Systems with Applications	10.1016/j.eswa.2020.114107
Study of Strength and Fatigue of Stainless Steel and Titanium Plates	Kajzer, A.| Niedźwiedź, S.| Kajzer, W.| Marciniak, J.| Gzik-Zroska, B.| Joszko, K.| Kaczmarek, M.| Pilecki, Z.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_29
Predictive maintenance scheduling with reliability characteristics depending on the phase of the machine life cycle	Paprocka, I.| Kempa, W.M.| Skołud, B.	2021	Engineering Optimization	10.1080/0305215X.2020.1714041
Innovative bioactive ag-sio2/tio2 coating on a niti-shape memory alloy: Structure and mechanism of its formation	Dulski, M.| Balcerzak, J.| Simka, W.| Dudek, K.	2021	Materials	10.3390/ma14010099
Stability of discrete-time fractional-order time-delayed neural networks in complex field	Pratap, A.| Raja, R.| Cao, J.| Huang, C.| Niezabitowski, M.| Bagdasar, O.	2021	Mathematical Methods in the Applied Sciences	10.1002/mma.6745
Application of original system to support specialist physiotherapy d4s in correction of postural defects as compared to other methods—a review	Bibrowicz, K.| Szurmik, T.| Lipowicz, A.| W. Mitas, A.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_15
A Simulated Annealing Based Method for Sequencing Problem in Mixed Model Assembly Lines	Krenczyk, D.| Dziki, K.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-57802-2_32
Clustering based multiple state–space projections	Kotas, M.P.| Dyrek, A.| Piela, M.| Leski, J.M.	2021	Signal Processing	10.1016/j.sigpro.2020.107762
Possible Use of Fuzzy Sets Similarity for Patient’s Parameters Observation	Straszecka, E.| Pander, T.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-47024-1_11
Rotating bed reactor packed with heterofunctional structured silica-supported lipase. Developing an effective system for the organic solvent and aqueous phase reactions	Kowalczykiewicz, D.| Szymańska, K.| Gillner, D.| Jarzębski, A.B.	2021	Microporous and Mesoporous Materials	10.1016/j.micromeso.2020.110789
ProteinUnet—An efficient alternative to SPIDER3-single for sequence-based prediction of protein secondary structures	Kotowski, K.| Smolarczyk, T.| Roterman-Konieczna, I.| Stapor, K.	2021	Journal of Computational Chemistry	10.1002/jcc.26432
Analog circuits specification driven testing by means of digital stream and non-linear estimation model optimized evolutionarily	GOLONEK, T.| CHRUSZCZYK, Ł.	2021	Bulletin of the Polish Academy of Sciences: Technical Sciences	10.24425/bpasts.2020.135390
Comprehensive hydrothermal analysis of an inclined mini-channel with fin array: by dual/multi-relaxation-time LBM and experimental process on SiO2-glycol rheological/thermal characteristics	Kamali, D.| Hejri, S.| Akbar, N.| Hasani Malekshah, E.	2021	International Journal of Numerical Methods for Heat and Fluid Flow	10.1108/HFF-08-2020-0527
The effect of turbulence on mass transfer in solid fuel combustion: RANS model	Karchniwy, E.| Haugen, N.E.L.| Klimanek, A.| Langørgen, Ø.| Sładek, S.	2021	Combustion and Flame	10.1016/j.combustflame.2020.12.040
Correlations of thermal properties with grain structure, morphology, and defect balance in nanoscale polycrystalline ZnO films	Kaźmierczak-Bałata, A.| Grządziel, L.| Guziewicz, M.| Venkatachalapathy, V.| Kuznetsov, A.| Krzywiecki, M.	2021	Applied Surface Science	10.1016/j.apsusc.2021.149095
Mechanical stability of retained austenite in aluminum-containing medium-Mn steel deformed at different temperatures	Kozłowska, A.| Radwański, K.| Matus, K.| Samek, L.| Grajcar, A.	2021	Archives of Civil and Mechanical Engineering	10.1007/s43452-021-00177-8
Binary Decision Diagrams	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_3
Polypropylene-matrix polymer composites with natural filler	Włodarczyk-FLIGIER, A.| POLOK-RUBINIEC, M.| CHMIELNICKI, B.	2021	Archives of Metallurgy and Materials	10.24425/amm.2021.134789
The influence of ZnO oxide layer on the physicochemical behavior of Ti6Al4V titanium alloy	Wozniak, A.| Walke, W.| Jakóbik-Kolon, A.| Ziębowicz, B.| Brytan, Z.| Adamiak, M.	2021	Materials	10.3390/ma14010230
Heterogeneous and dependable networks in industry – A survey	Scanzio, S.| Wisniewski, L.| Gaj, P.	2021	Computers in Industry	10.1016/j.compind.2020.103388
In silico study on the effects of carbonyl groups on chemical equilibrium of reactions with a polar product occurring under confinement in pores of activated carbons	Furmaniak, S.| Gauden, P.A.| Patrykiejew, A.| Szymański, G.| Miśkiewicz, R.| Kowalczyk, P.	2021	Chemical Engineering Communications	10.1080/00986445.2019.1700115
Influence of Music on HRV Indices Derived from ECG and SCG	Sieciński, S.| Kostka, P.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_39
Vibration busters: An interdisciplinary approach to learning of dynamical systems	Walentyński, R.| Słota, D.| Szczygieł, M.	2021	ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik	10.1002/zamm.202000110
Efficient, low-cost optical coupling mechanism for TiO2-SiO2sol-gel derived slab waveguide surface grating coupler sensors	Kaźmierczak, A.| Słowikowski, M.| Pavłov, K.| Filipiak, M.| Vervaeke, M.| Tyszkiewicz, C.| Ottevaere, H.| Piramidowicz, R.| Karasiński, P.	2021	Optica Applicata	10.37190/OA200403
Hand Grip Strength and Suppleness as Progress Determinants in Female Pole Dancers’ Training	Mikula, B.| Wolny, S.| Nowakowska, K.| Guzik-Kopyto, A.| Chuchnowska, I.| Michnik, R.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_20
Segmentation and Registration of High-Frequency Ultrasound Images of Superficial Veins	Pyciński, B.| Czajkowska, J.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_37
Heavy-Atom-Free Room-Temperature Phosphorescent Organic Light-Emitting Diodes Enabled by Excited States Engineering	Higginbotham, H.F.| Okazaki, M.| De Silva, P.| Minakata, S.| Takeda, Y.| Data, P.	2021	ACS Applied Materials and Interfaces	10.1021/acsami.0c17295
Selecting optimal conditions for the turbine warm and hot start-up	Rusin, A.| Nowak, G.| Łukowicz, H.| Kosman, W.| Chmielniak, T.| Kaczorowski, M.	2021	Energy	10.1016/j.energy.2020.118836
An 18-month analysis of bond strength of hot-dip galvanized reinforcing steel b500sp and s235jr+ar to chloride contaminated concrete	Jaśniok, M.| Kołodziej, J.| Gromysz, K.	2021	Materials	10.3390/ma14040747
Effects of modifying the hypoeutectic AlMg5Si2Mn alloy via addition of Al10Sr and/or Al5TiB	Snopiński, P.| Król, M.| Wróbel, T.| Matus, K.| Woźniak, A.| Tański, T.| Palček, P.	2021	Archives of Civil and Mechanical Engineering	10.1007/s43452-020-00147-6
Simulation of biomass combustion with modified flue gas tract	Kantová, N.Č.| Sładek, S.| Jandačka, J.| Čaja, A.| Nosek, R.	2021	Applied Sciences (Switzerland)	10.3390/app11031278
Partial Sharing of Logic Resources	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_9
Microchamber microfluidics combined with thermogellable glycomicrogels – Platform for single cells study in an artificial cellular microenvironment	Student, S.| Milewska, M.| Ostrowski, Z.| Gut, K.| Wandzik, I.	2021	Materials Science and Engineering C	10.1016/j.msec.2020.111647
Quercetin as a natural therapeutic candidate for the treatment of influenza virus	Mehrbod, P.| Hudy, D.| Shyntum, D.| Markowski, J.| Łos, M.J.| Ghavami, S.	2021	Biomolecules	10.3390/biom11010010
Upperbounds on the probability of finding marked connected components using quantum walks	Glos, A.| Nahimovs, N.| Balakirev, K.| Khadiev, K.	2021	Quantum Information Processing	10.1007/s11128-020-02939-4
Tuning rules for industrial use of the second-order reduced active disturbance rejection controller	Nowak, P.| Czeczot, J.| Grelewicz, P.	2021	Archives of Control Sciences	10.24425/acs.2020.135848
Trajectory of Fifths in Music Data Mining	Kania, D.| Kania, P.| Lukaszewicz, T.	2021	IEEE Access	10.1109/ACCESS.2021.3049266
Kinematics of the retractable roofing module constructed from three roof panels with stiffening of the central panel	Pawlak-Jakubowska, A.| Romaniak, K.	2021	Structures	10.1016/j.istruc.2020.11.030
Technology Mapping of Logic Functions in LUT Blocks	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_11
Electrodialysis enhanced with disodium EDTA as an innovative method for separating Cu(II) ions from zinc salts in wastewater	Babilas, D.| Muszyński, J.| Milewski, A.| Leśniak-Ziółkowska, K.| Dydo, P.	2021	Chemical Engineering Journal	10.1016/j.cej.2020.127908
Numerical investigation of the vibro-acoustic response of functionally graded lightweight square panel at low and mid-frequency regions	Isaac, C.W.| Wrona, S.| Pawelczyk, M.| Roozen, N.B.	2021	Composite Structures	10.1016/j.compstruct.2020.113460
Evaluation of a micro-cogeneration unit with integrated electrical energy storage for residential application	Uchman, W.| Kotowicz, J.| Li, K.F.	2021	Applied Energy	10.1016/j.apenergy.2020.116196
Decomposition of Multioutput Functions Described Using BDD	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_8
Mitigation of phase noise and nonlinearities for high capacity radio-over-fiber links	Khan, M.K.A.| Ali, F.| Irfan, M.| Muhammad, F.| Althobiani, F.| Ali, A.| Khan, S.| Rahman, S.| Perun, G.| Glowacz, A.	2021	Electronics (Switzerland)	10.3390/electronics10030345
Use of n-perturbation interval ray tracing method in predicting acoustic field distribution	Winkler-Skalna, A.| Nowoświat, A.	2021	Applied Mathematical Modelling	10.1016/j.apm.2020.12.028
Bias arising from 222Rn contamination in standardized methods for biobased content determination and a simple removal method	Tudyka, K.| Pawełczyk, F.| Michczyński, A.	2021	Measurement: Journal of the International Measurement Confederation	10.1016/j.measurement.2020.108263
Article electrochemical oxidation of Ti15Mo alloy—the impact of anodization parameters on surface morphology of nanostructured oxide layers	Jarosz, M.| Zaraska, L.| Kozieł, M.| Simka, W.| Sulka, G.D.	2021	Nanomaterials	10.3390/nano11010068
Pyrite thermal decomposition in source rocks	Labus, M.	2021	Fuel	10.1016/j.fuel.2020.119529
Algorithms for Decomposition and Technological Mapping	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_14
Impact of current pulsation on BLDC motor parameters	Sikora, A.| Woźniak, M.	2021	Sensors (Switzerland)	10.3390/s21020587
Semi-active links in double-panel noise barriers	Wrona, S.| Pawelczyk, M.| Cheng, L.	2021	Mechanical Systems and Signal Processing	10.1016/j.ymssp.2020.107542
Measurement-based modelling of material moisture and particle classification for control of copper ore dry grinding process	Krauze, O.| Buchczik, D.| Budzan, S.	2021	Sensors (Switzerland)	10.3390/s21020667
Methods supporting the understanding of structural information by blind people and selected aspects of their evaluation	Maćkowski, M.| Rojewska, K.| Dzieciątko, M.| Bielecka, K.| Bas, M.| Spinczyk, D.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_24
Comparison of a Thermal AC Voltage Standard in the 1-30-MHz Frequency Range	Kampik, M.| Grzenik, M.| Lippert, T.| Rydler, K.-E.| Tarasso, V.| Trinchera, B.	2021	IEEE Transactions on Instrumentation and Measurement	10.1109/TIM.2020.3007296
Removal of heavy metal ions from wastewaters: An application of sodium trithiocarbonate and wastewater toxicity assessment	Thomas, M.| Kozik, V.| Bąk, A.| Barbusiński, K.| Jazowiecka‐rakus, J.| Jampilek, J.	2021	Materials	10.3390/ma14030655
PLC implementation in the form of a system-on-a-chip	MAZUR, P.| CZERWINSKI, R.| CHMIEL, M.	2021	Bulletin of the Polish Academy of Sciences: Technical Sciences	10.24425/bpasts.2020.135386
An assessment of the thermal behavior of envelope surface coatings with different colors	Pokorska-Silva, I.| Kadela, M.| Małek, M.| Fedorowicz, L.	2021	Polymers	10.3390/polym13010082
Carbon dioxide capture using water-imidazolium ionic liquids-amines ternary systems	Zalewski, M.| Krawczyk, T.| Siewniak, A.| Sobolewski, A.	2021	International Journal of Greenhouse Gas Control	10.1016/j.ijggc.2020.103210
Comparison of the properties of natural sorbents for the calcium looping process	Labus, K.	2021	Materials	10.3390/ma14030548
Technology as a Support for Rehabilitation Patients After Stroke	Kania, D.| Romaniszyn, P.| Mańka, A.| Ledwoń, D.| Łysień, A.| Nawrat–Szołtysik, A.| Danch–Wierzchowska, M.| Michnik, R.| Mitas, A.| Myśliwiec, A.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_24
Assessment of the hot cracking susceptibility of the inconel 617 nickel-based alloy	ADAMIEC, J.| KONIECZNA, N.	2021	Archives of Metallurgy and Materials	10.24425/amm.2021.134781
An experimental investigation of performance and instabilities of the R744 vapour compression rack equipped with a two-phase ejector based on short-term, long-term and unsteady operations	Haida, M.| Palacz, M.| Bodys, J.| Smolka, J.| Gullo, P.| Nowak, A.J.	2021	Applied Thermal Engineering	10.1016/j.applthermaleng.2020.116353
Projective Filtering with Adaptive Selected Projective Dimensions	Przybyła, T.| Pander, T.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-47024-1_26
Experimental investigation using distributed optical fiber sensor measurements in unbound granular layers	Bzówka, J.| Grygierek, M.| Rokitowski, P.	2021	Engineering Structures	10.1016/j.engstruct.2020.111767
The properties of a polypropylene matrix composite with anthracite filler	POLOK-RUBINIEC, M.| Włodarczyk-FLIGIER, A.| CHMIELNICKI, B.	2021	Archives of Metallurgy and Materials	10.24425/amm.2021.134788
Insight into thermal stress distribution and required reinforcement reducing early-age cracking in mass foundation slabs	Klemczak, B.| Żmij, A.	2021	Materials	10.3390/ma14030477
Decomposition of Functions Described Using BDD	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_5
Pancreas and duodenum—automated organ segmentation	Zarychta, P.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_8
Effective elastic properties of composites with randomly distributed thin rigid fibres	Fedelinski, P.	2021	Archive of Applied Mechanics	10.1007/s00419-020-01758-4
In vitro and in vivo efficacy of a novel glucose–methotrexate conjugate in targeted cancer treatment	Woźniak, M.| Pastuch-Gawołek, G.| Makuch, S.| Wiśniewski, J.| Krenács, T.| Hamar, P.| Gamian, A.| Szeja, W.| Szkudlarek, D.| Krawczyk, M.| Agrawal, S.	2021	International Journal of Molecular Sciences	10.3390/ijms22041748
Numerical investigation on fire accident and evacuation in a urban tunnel for different traffic conditions	Król, A.| Król, M.	2021	Tunnelling and Underground Space Technology	10.1016/j.tust.2020.103751
Performance of damage identification based on directional wavelet transforms and entopic weights using experimental shearographic testing results	Katunin, A.	2021	Sensors (Switzerland)	10.3390/s21030714
Analysis of the work of a “renewable” methanol production installation based ON H2 from electrolysis and CO2 from power plants	Kotowicz, J.| Węcel, D.| Brzęczek, M.	2021	Energy	10.1016/j.energy.2020.119538
Damage identification by wavelet analysis of modal rotation differences	Katunin, A.| Araújo dos Santos, J.V.| Lopes, H.	2021	Structures	10.1016/j.istruc.2021.01.010
Bioactive betulin and peg based polyanhydrides for use in drug delivery systems	Niewolik, D.| Bednarczyk-Cwynar, B.| Ruszkowski, P.| Sosnowski, T.R.| Jaszcz, K.	2021	International Journal of Molecular Sciences	10.3390/ijms22031090
Study of Physicochemical Properties of CoCrMo Alloy with PLCL Polymer Coating Intended for Urology	Kajzer, W.| Niścior, P.| Kajzer, A.| Basiaga, M.| Szewczenko, J.| Jaworska, J.| Jelonek, K.| Kasperczyk, J.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_28
An analytical solution to the problem of a cup-cored coil located over a conducting plate with a hole	Tytko, G.| Kowalik, Z.	2021	Insight: Non-Destructive Testing and Condition Monitoring	10.1784/INSI.2020.62.12.718
Identification of structural damage using S-transform from 1D and 2D mode shapes	Katunin, A.	2021	Measurement: Journal of the International Measurement Confederation	10.1016/j.measurement.2020.108656
Deep learning approach to automated segmentation of tongue in camera images for computer-aided speech diagnosis	Sage, A.| Miodońska, Z.| Kręcichwost, M.| Trzaskalik, J.| Kwaśniok, E.| Badura, P.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_4
The use of waste, fine-grained carbonaceous material in the process of copper slag reduction	Łabaj, J.| Blacha, L.| Jodkowski, M.| Smalcerz, A.| Fröhlichová, M.| Findorak, R.	2021	Journal of Cleaner Production	10.1016/j.jclepro.2020.125640
Analysis of ultrashort laser pulse irradiation with 2d thin metal films using the fuzzy lattice boltzmann method	Piasecka-Belkhayat, A.| Korczak, A.	2021	Journal of Theoretical and Applied Mechanics (Poland)	10.15632/jtam-pl/115448
Exchange bias in thin films—an update	Blachowicz, T.| Ehrmann, A.	2021	Coatings	10.3390/coatings11020122
The Study of Electrochemical Properties of Surface Modified Casting Alloys Used in Dental Prosthetics	Zibowicz, A.| Woźniak, A.| Zibowicz, B.| Chladek, G.| Boryło, P.| Walke, W.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_33
Impact of the Heat Transfer Coefficient Determination Method on the Simulation of the Operation of Fin-and-Tube Cross-Flow Heat Exchangers at a Non-Uniform Inflow of Mediums	Bury, T.| Hanuszkiewicz-Drapała, M.	2021	Heat Transfer Engineering	10.1080/01457632.2019.1699288
Flow in a myocardial bridge region of a coronary artery—experimental rig and numerical model	Melka, B.| Nowak, M.| Rojczyk, M.| Gracka, M.| Adamczyk, W.| Ostrowski, Z.| Bialecki, R.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_20
Multimodal signal analysis for pain recognition in physiotherapy using wavelet scattering transform	Badura, A.| Masłowska, A.| Myśliwiec, A.| Piętka, E.	2021	Sensors (Switzerland)	10.3390/s21041311
Smart Homes: How Much Will They Support Us? A Research on Recent Trends and Advances	Zielonka, A.| Wozniak, M.| Garg, S.| Kaddoum, G.| Piran, M.J.| Muhammad, G.	2021	IEEE Access	10.1109/ACCESS.2021.3054575
Tuning the electrochemical and optical properties of donor-acceptor D-A2-A1-A2-D derivatives with central benzothiadiazole core by changing the A2 strength	Pluczyk-Malek, S.| Honisz, D.| Akkuratov, A.| Troshin, P.| Lapkowski, M.	2021	Electrochimica Acta	10.1016/j.electacta.2020.137540
Simulation Investigation of Occlusal Loads Transfer in Personalized Titanium Plates in the Case of Jaw Osteotomy	Bobik, G.| Żmudzki, J.| Tański, T.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_11
Structuring of the Ti6Al4V alloy surface by pulsed laser remelting	Grabowski, A.| Florian, T.| Wieczorek, J.| Adamiak, M.	2021	Applied Surface Science	10.1016/j.apsusc.2020.147618
Evaluation of the applicability of polymeric materials to BTEX and fine product transformation by catalytic and non-catalytic pyrolysis as a part of the closed loop material economy	Gałko, G.| Rejdak, M.| Tercki, D.| Bogacka, M.| Sajdak, M.	2021	Journal of Analytical and Applied Pyrolysis	10.1016/j.jaap.2021.105017
Theoretical Basis of Decomposition	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_4
Micellar carriers of active substances based on amphiphilic PEG/PDMS heterograft copolymers: Synthesis and biological evaluation of safe use on skin	Odrobińska, J.| Skonieczna, M.| Neugebauer, D.	2021	International Journal of Molecular Sciences	10.3390/ijms22031202
Application of systematic scanning and variance analysis method to evaluation of pores arrangement in sintered steel	Roskosz, S.| Chrapoński, J.| Madej	2021	Measurement: Journal of the International Measurement Confederation	10.1016/j.measurement.2020.108325
Effect of various types of metro-rhythmic stimulations on the variability of gait frequency	Michnik, R.| Nowakowska-Lipiec, K.| Mańka, A.| Niedzwiedź, S.| Twardawa, P.| Romaniszyn, P.| Turner, B.| Danecka, A.| W. Mitas, A.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_10
Effective doping of single-walled carbon nanotubes with polyethyleneimine	Rdest, M.| Janas, D.	2021	Materials	10.3390/ma14010065
Properties of expanded graphite polystyrene damaged by the impact of solar radiation	Nowoświat, A.| Krause, P.| Miros, A.	2021	Journal of Building Engineering	10.1016/j.jobe.2020.101920
Advanced computational intelligence for object detection, feature extraction and recognition in smart sensor environments	Woźniak, M.	2021	Sensors (Switzerland)	10.3390/s21010045
Risk management system in metallurgical production	Karkoszka, T.	2021	Metalurgija	-
Use of 3D Printing in Designing Sensor Overlays Used to Determine the Foot Pressure Distribution on the Ground	Duda, S.| Gembalczyk, G.| Machoczek, T.| Szyszka, P.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_16
Determination of Heat Transfer Coefficient for Array of Free Surface Water Jets	Ryfa, A.| Rojczyk, M.| Adamczyk, W.	2021	Heat Transfer Engineering	10.1080/01457632.2019.1699298
Evaluation of Transverse Abdominal Muscles Impact on Body Posture	Gzik-Zroska, B.| Kocjan, J.| Nowakowska, K.| Purgoł, P.| Burkacki, M.| Suchoń, S.| Joszko, K.| Michnik, R.| Adamek, M.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_4
Ferromagnetic coil frequency response and dynamics modeling with fractional elements	Sowa, M.	2021	Electrical Engineering	10.1007/s00202-020-01190-5
Hexapod robot gait switching for energy consumption and cost of transport management using heuristic algorithms	Luneckas, M.| Luneckas, T.| Kriaučiūnas, J.| Udris, D.| Plonis, D.| Damaševičius, R.| Maskeliūnas, R.	2021	Applied Sciences (Switzerland)	10.3390/app11031339
The method of production scheduling with uncertainties using the ants colony optimisation	Paprocka, I.| Krenczyk, D.| Burduk, A.	2021	Applied Sciences (Switzerland)	10.3390/app11010171
The Concept of Genetic Algorithm Application for Scheduling Operations with Multi-resource Requirements	Paprocka, I.| Kalinowski, K.| Balon, B.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-57802-2_33
Characteristics of some selected methods of rare earth elements recovery from coal fly ashes	Rybak, A.| Rybak, A.	2021	Metals	10.3390/met11010142
Modelling of technological parameters of aluminium melt refining in the ladle by blowing of inert gas through the rotating impeller	Walek, J.| Michalek, K.| Tkadlečková, M.| Saternus, M.	2021	Metals	10.3390/met11020284
Influence of elemental carbon (EC) coating covering Nc-(Ti,Mo)C particles on the microstructure and properties of titanium matrix composites prepared by reactive spark plasma sintering	Biedunkiewicz, A.| Figiel, P.| Garbiec, D.| Obrosov, A.| Pawlyta, M.| Biedunkiewicz, W.| Pruss, P.| Rokosz, K.| Wróbel, R.| Raaen, S.| Weiß, S.| Bokov, D.	2021	Materials	10.3390/ma14010231
Temperature-based prediction of joint hardness in TIG welding of inconel 600, 625 and 718 nickel superalloys	Jamrozik, W.| Górka, J.| Kik, T.	2021	Materials	10.3390/ma14020442
Key properties of a bioactive ag-sio2 /tio2 coating on niti shape memory alloy as necessary at the development of a new class of biomedical materials	Dulski, M.| Gawecki, R.| Sułowicz, S.| Cichomski, M.| Kazek-Kęsik, A.| Wala, M.| Leśniak-Ziółkowska, K.| Simka, W.| Mrozek-Wilczkiewicz, A.| Gawęda, M.| Sitarz, M.| Dudek, K.	2021	International Journal of Molecular Sciences	10.3390/ijms22020507
Analysis of DC reversal error of the calorimetric thermal voltage converter	Kubiczek, K.| Kampik, M.| Grzenik, M.	2021	Measurement: Journal of the International Measurement Confederation	10.1016/j.measurement.2020.108439
Corrigendum to “Assessment of improvement in the energy and exergy efficiency of the gas heat plant after the exhaust gas cooled down below the dew point and the use of recovered heat” [Energy 190 (1 January 2020) 116179] (Energy (2020) 190, (S0360544219318742), (10.1016/j.energy.2019.116179))	Ostrowski, P.| Szelejewski, F.| Zymelka, P.	2021	Energy	10.1016/j.energy.2020.119633
Carbon nanotube materials for electrocardiography	Kolanowska, A.| Herman, A.P.| Jȩdrysiak, R.G.| Boncel, S.	2021	RSC Advances	10.1039/d0ra08679g
Robustness of Pathway Enrichment Analysis to Transcriptome-Wide Gene Expression Platform	Zyla, J.| Leszczorz, K.| Polanska, J.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-54568-0_18
Similarity of Parts Determined by Semantic Networks as the Basis for Manufacturing Cost Estimation	Ćwikła, G.| Bańczyk, K.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-57802-2_31
The possibilities of cooperation between a hydrogen generator and a wind farm	Kotowicz, J.| Jurczyk, M.| Węcel, D.	2021	International Journal of Hydrogen Energy	10.1016/j.ijhydene.2020.11.246
Utilization of waste coal flotation concentrate for copper matte smelting	Łabaj, J.| Blacha, L.| Smalcerz, A.| Wieczorek, J.| Frӧhlichová, M.| Vadasz, P.| Findorak, R.| Niesler, M.	2021	Engineering Science and Technology, an International Journal	10.1016/j.jestch.2021.01.003
Computer-based analysis of spontaneous infant activity: A pilot study	Doroniewicz, I.| Ledwoń, D.| Bugdol, M.N.| Kieszczyńska, K.| Affanasowicz, A.| Matyja, M.| Badura, D.| Mitas, A.W.| Myśliwiec, A.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_12
Deep learning based evaluation of spermatozoid motility for artificial insemination	Valiuškaitė, V.| Raudonis, V.| Maskeliūnas, R.| Damaševičius, R.| Krilavičius, T.	2021	Sensors (Switzerland)	10.3390/s21010072
Corrosion inhibitor-modified plasma electrolytic oxidation coatings on 6061 aluminum alloy	Sowa, M.| Wala, M.| Blacha-Grzechnik, A.| Maciej, A.| Kazek-Kęsik, A.| Stolarczyk, A.| Simka, W.	2021	Materials	10.3390/ma14030619
Hot deformation activation energy of metallic materials influenced by strain value	SCHINDLER, I.| Opěla, P.| KAWULOK, P.| SAUER, M.| RUSZ, S.| KUC, D.| RODAK, K.	2021	Archives of Metallurgy and Materials	10.24425/amm.2021.134779
Global existence and stability of Nicholson blowflies model with harvesting and random effect	Abbas, S.| Niezabitowski, M.| Grace, S.R.	2021	Nonlinear Dynamics	10.1007/s11071-020-06196-z
Effect of aluminium powder on kaolin-based geopolymer characteristic and removal of Cu2+	Ariffin, N.| Abdullah, M.M.A.B.| Postawa, P.| Rahim, S.Z.A.| Zainol, M.R.R.M.A.| Jaya, R.P.| Śliwa, A.| Omar, M.F.| Wysłocki, J.J.| Błoch, K.| Nabiałek, M.	2021	Materials	10.3390/ma14040814
The analysis of similarities between the European Union countries in terms of the level and structure of the emissions of selected gases and air pollutants into the atmosphere	Brodny, J.| Tutak, M.	2021	Journal of Cleaner Production	10.1016/j.jclepro.2020.123641
A review of the crashworthiness performance of energy absorbing composite structure within the context of materials, manufacturing and maintenance for sustainability	Isaac, C.W.| Ezekwem, C.	2021	Composite Structures	10.1016/j.compstruct.2020.113081
Application of machine-learning methods to recognize mitoBK Channels from different cell types based on the experimental patch-clamp results	Richter-Laskowska, M.| Trybek, P.| Bednarczyk, P.| Wawrzkiewicz-Jałowiecka, A.	2021	International Journal of Molecular Sciences	10.3390/ijms22020840
Psychophysiological state changes assesment based on thermal face image—preliminary results	Danch-Wierzchowska, M.| Bugdol, M.| W. Mitas, A.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_14
Modification of nZVI with a bio-conjugate containing amine and carbonyl functional groups for catalytic activation of persulfate	Silvestri, D.| Wacławek, S.| Sobel, B.| Torres–Mendieta, R.| Pawlyta, M.| Padil, V.V.T.| Filip, J.| Černík, M.	2021	Separation and Purification Technology	10.1016/j.seppur.2020.117880
Numerical modeling of heat and mass transfer during cryopreservation using interval analysis	Skorupa, A.| Piasecka-Belkhayat, A.	2021	Applied Sciences (Switzerland)	10.3390/app11010302
3D Thermal Volume Reconstruction from 2D Infrared Images—a Preliminary Study	Sage, A.| Ledwoń, D.| Juszczyk, J.| Badura, P.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_38
Piezoelectric nanogenerator based on lead‐free flexible pvdf‐barium titanate composite films for driving low power electronics	Sahu, M.| Hajra, S.| Lee, K.| Deepti, P.| Mistewicz, K.| Kim, H.J.	2021	Crystals	10.3390/cryst11020085
Results of Experiments	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_15
Modeling and control of an underactuated system for dynamic body weight support	Gembalczyk, G.| Gierlak, P.| Duda, S.	2021	Applied Sciences (Switzerland)	10.3390/app11030905
The laser alloying process of ductile cast iron surface with titanium	Kotarska, A.	2021	Metals	10.3390/met11020282
Effect of grain fractions of crushed carbon foam on morphology and thermomechanical and tribological properties of random epoxy-carbon composites	Szeluga, U.| Olszowska, K.| Pusz, S.| Myalski, J.| Godzierz, M.| Kobyliukh, A.| Tsyntsarski, B.	2021	Wear	10.1016/j.wear.2020.203558
Ability of the Configuration of Configurable Logic Blocks	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_10
Decomposition Methods of FSM Implementation	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_13
Strength parameters of foamed geopolymer reinforced with gfrp mesh	Krzywoń, R.| Dawczyński, S.	2021	Materials	10.3390/ma14030689
Atomic layer deposited ZnO films on stainless steel for biomedical applications	Basiaga, M.| Walke, W.| Kajzer, W.| Sambok-Kiełbowicz, A.| Szewczenko, J.| Simka, W.| Szindler, M.| Ziębowicz, B.| Lubenets, V.	2021	Archives of Civil and Mechanical Engineering	10.1007/s43452-020-00148-5
CFD modelling of R410A flow through an expansion valve using equilibrium and modified relaxation models	Loska, M.| Smolka, J.| Haida, M.| Kriezi, E.E.| Banasiak, K.	2021	Applied Thermal Engineering	10.1016/j.applthermaleng.2020.116442
System with Switchings as Models of Regulatory Modules in Genomic Cell Systems	Świerniak, A.| Ochab, M.| Puszyński, K.	2021	Studies in Systems, Decision and Control	10.1007/978-3-030-48587-0_24
Optimization of soapstock splitting process to reduce the concentration of impurities in wastewater	Barbusiński, K.| Fajkis, S.| Szeląg, B.	2021	Journal of Cleaner Production	10.1016/j.jclepro.2020.124459
Structural characterization of al65cu20fe15 melt-spun alloy by x-ray, neutron diffraction, high-resolution electron microscopy and mössbauer spectroscopy	Babilas, R.| Młynarek, K.| Łoński, W.| Łukowiec, D.| Kadziołka-Gaweł, M.| Czeppe, T.| Temleitner, L.	2021	Materials	10.3390/ma14010054
Ordering Variables in BDD Diagrams	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_6
Methods of Device Noise Control	Pawełczyk, M.| Wrona, S.| Mazur, K.	2021	Studies in Systems, Decision and Control	10.1007/978-3-030-48587-0_27
Evaluation of shape from shading surface reconstruction quality for liver phantom	Bas, M.| Spinczyk, D.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_7
The Surface Topography and Physicochemical and Mechanical Properties of Pure Titanium (CP Ti) Manufactured by Selective Laser Melting (SLM)	Woźniak, A.| Adamiak, M.| Ziębowicz, B.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_25
Wear resistance of (Ti,Al)N metallic coatings for extremal working conditions	Mikuła, J.| Pakuła, D.| Żukowska, L.| Gołombek, K.| Kříž, A.	2021	Coatings	10.3390/coatings11020157
The optical parameters of TiO2 antireflection coating prepared by atomic layer deposition method for photovoltaic application	Szindler, M.| Szindler, M.M.	2021	Optica Applicata	10.37190/OA200412
The influence of hyperquenching temperature on microstructure and mechanical properties of alloy cast steel GX2CrNiMoCuN 25-6-3-3	JURCZYK, P.| WRÓBEL, T.| BARON, C.Z.	2021	Archives of Metallurgy and Materials	10.24425/amm.2021.134761
Influence of molding materials on the self-hardening of x46cr13 steel / grey cast iron bimetallic castings	PRZYSZLAK, N.| WRÓBEL, T.| DULSKA, A.	2021	Archives of Metallurgy and Materials	10.24425/amm.2021.134757
Short-term scheduling of gas-fired CHP plant with thermal storage using optimization algorithm and forecasting models	Żymełka, P.| Szega, M.	2021	Energy Conversion and Management	10.1016/j.enconman.2021.113860
Preface	Pietka, E.	2021	Advances in Intelligent Systems and Computing	-
Nondisjoint Decomposition	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_7
Chart Design Method for Multicoil Resonant Wireless Power Transfer Systems	Kaczmarczyk, Z.| Bodzek, K.| Frania, K.| Ruszczyk, A.	2021	IEEE Transactions on Power Electronics	10.1109/TPEL.2020.3000005
The composition of poly(vinyl chloride) with polylactide/poly(butylene terephthalate-co-butylene sebacate) and its biodegradation by Phanerochaete chrysosporium	Nowak, B.| Rusinowski, S.| Korytkowska-Wałach, A.| Chmielnicki, B.	2021	International Biodeterioration and Biodegradation	10.1016/j.ibiod.2020.105153
Control of two-phase heat transfer and condensation loss in turbine blade cascade by injection water droplets	Ali Faghih Aliabadi, M.| Zhang, G.| Dykas, S.| Li, H.	2021	Applied Thermal Engineering	10.1016/j.applthermaleng.2020.116541
Preface	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	-
Initial Report on Numerical Modeling of Blood Flow in Myocardial Bridge Region of Coronary Artery: Concept of Model Validation	Melka, B.| Nowak, M.| Rojczyk, M.| Gracka, M.| Adamczyk, W.| Ostrowski, Z.| Białecki, R.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_9
Linear copolymers based on choline ionic liquid carrying anti-tuberculosis drugs: Influence of anion type on physicochemical properties and drug release	Niesyto, K.| Neugebauer, D.	2021	International Journal of Molecular Sciences	10.3390/ijms22010284
In vitro analysis of a physiological strain sensor formulated from a PEDOT:PSS functionalized carbon nanotube-poly(glycerol sebacate urethane) composite	Tadayyon, G.| Krukiewicz, K.| Britton, J.| Larrañaga, A.| Vallejo-Giraldo, C.| Fernandez-Yague, M.| Guo, Y.| Orpella-Aceret, G.| Li, L.| Poudel, A.| Biggs, M.J.P.	2021	Materials Science and Engineering C	10.1016/j.msec.2020.111857
Necessary and sufficient conditions for assignability of dichotomy spectra of continuous time-varying linear systems	Babiarz, A.| Cuong, L.V.| Czornik, A.| Doan, T.S.	2021	Automatica	10.1016/j.automatica.2020.109466
Shaping workplace safety in the metallurgical industry	Spilka, M.	2021	Metalurgija	-
Assessment of Changing the Radial Forces of Biodegradable Stent in One Month Time Interval	Joszko, K.| Gzik-Zroska, B.| Gzik, M.| Wolański, W.| Iskra, A.| Burkacki, M.| Suchoń, S.| Sobota, R.| Szarek, A.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_6
The impact of wood waste on the properties of silicone-based composites	Mrówka, M.| Szymiczek, M.| Skonieczna, M.	2021	Polymers	10.3390/polym13010007
Technology Mapping of Logic Functions in Complex Logic Blocks	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_12
The cost of increasing prosumer self-sufficiency	Uchman, W.	2021	Applied Thermal Engineering	10.1016/j.applthermaleng.2020.116361
Environmental performance of dye-sensitized solar cells based on natural dyes	Błaszczyk, A.| Joachimiak-Lechman, K.| Sady, S.| Tański, T.| Szindler, M.| Drygała, A.	2021	Solar Energy	10.1016/j.solener.2020.12.040
Influence of isomeric phthaloperinone monomers on the formation of π-dimers and σ-bonded segments in electrochemically-crosslinked products	Czichy, M.| Janasik, P.| Motyka, R.| Zassowski, P.| Grabiec, E.| Wolinska-Grabczyk, A.| Lapkowski, M.	2021	Electrochimica Acta	10.1016/j.electacta.2020.137669
Evaluation of Mechanical Properties of Hernia Surgical Mesh Implants	Lisoń, J.| Basiaga, M.| Paszenda, Z.| Nakonieczny, D.| Walke, W.| Antonowicz, M.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_26
Methods for Representing Boolean Functions—Basic Definitions	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_2
Characteristics of the Mg-Zn-Ca-Gd alloy after mechanical alloying	Lesz, S.| Hrapkowicz, B.| Karolus, M.| Gołombek, K.	2021	Materials	10.3390/ma14010226
New possibilities of 2-pyranone derivatives – Thermal, optical and electrochemical properties	Kula, S.| Szlapa-Kula, A.| Krompiec, S.| Schab-Balcerzak, E.| Chrobok, A.| Gancarz, P.| Filapek, M.	2021	Materials Science and Engineering B: Solid-State Materials for Advanced Technology	10.1016/j.mseb.2020.114820
Automated Classification of Axial CT Slices Using Convolutional Neural Network	Badura, P.| Juszczyk, J.| Bożek, P.| Smoliński, M.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_34
Double-panel active noise reducing casing with noise source enclosed inside – Modelling and simulation study	Wyrwal, J.| Pawelczyk, M.| Liu, L.| Rao, Z.	2021	Mechanical Systems and Signal Processing	10.1016/j.ymssp.2020.107371
Between Geometry and Technical Drawing - Didactic Interactive and Animated Drawing Teaching Tools of the DIAD-TOOLS Project	Sroka-Bizoń, M.| Dudzik, P.| Sankauskienė, T.| Terczyńska, E.| Tofil, J.| Tytkowski, K.| Vansevicius, A.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-63403-2_66
Impact of Footwear Used in Orthoses on the Kinematics of Locomotor Functions and Energy Expenditure—Case Study	Jochymczyk-Woźniak, K.| Nowakowska, K.| Zakałużna-Żerebecka, A.| Michnik, R.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_17
In vitro evaluation of electrochemically bioactivated Ti6Al4V 3D porous scaffolds	Myakinin, A.| Turlybekuly, A.| Pogrebnjak, A.| Mirek, A.| Bechelany, M.| Liubchak, I.| Oleshko, O.| Husak, Y.| Korniienko, V.| Leśniak-Ziółkowska, K.| Dogadkin, D.| Banasiuk, R.| Moskalenko, R.| Pogorielov, M.| Simka, W.	2021	Materials Science and Engineering C	10.1016/j.msec.2021.111870
Dual rolls equal channel extrusion as unconventional SPD process of the ultralow-carbon steel: finite element simulation, experimental investigations and microstructural analysis	Jabłońska, M.B.| Kowalczyk, K.| Tkocz, M.| Bulzak, T.| Bednarczyk, I.| Rusz, S.	2021	Archives of Civil and Mechanical Engineering	10.1007/s43452-020-00166-3
Optical motion capture dataset of selected techniques in beginner and advanced Kyokushin karate athletes	Szczęsna, A.| Błaszczyszyn, M.| Pawlyta, M.	2021	Scientific Data	10.1038/s41597-021-00801-5
ECD spectroelectrochemistry: A review	Karoń, K.| Łapkowski, M.| Dobrowolski, J.C.	2021	Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy	10.1016/j.saa.2020.119349
Effect of Carbon Layers Deposited by PACVD and RMS Methods on Corrosion Resistance of Ni-Ti Alloy	Kaczmarek, M.| Kurtyka, P.| Paszenda, Z.| Basiaga, M.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_30
Mag welding process with micro-jet cooling as the effective method for manufacturing joints for s700mc steel	Węgrzyn, T.| Szymczak, T.| Szczucka-Lasota, B.| Łazarz, B.	2021	Metals	10.3390/met11020276
Modification of SiOC-based layers with cerium ions - influence on the structure, microstructure and corrosion resistance	Gawęda, M.| Jeleń, P.| Bik, M.| Leśniak, M.| Sowa, M.| Simka, W.| Golda-Cepa, M.| Brzychczy-Włoch, M.| Olejniczak, Z.| Nocuń, M.| Sitarz, M.	2021	Applied Surface Science	10.1016/j.apsusc.2020.148871
Thermodynamic and environmental study on synthetic natural gas production in power to gas approaches involving biomass gasification and anaerobic digestion	Skorek-Osikowska, A.	2021	International Journal of Hydrogen Energy	10.1016/j.ijhydene.2021.01.002
Electrochemically produced copolymers of pyrrole and its derivatives: A plentitude of material properties using “simple” heterocyclic co-monomers	Jarosz, T.| Ledwon, P.	2021	Materials	10.3390/ma14020281
Effect of hydrogen addition on the energetic and ecologic parameters of an si engine fueled by biogas	Pukalskas, S.| Kriaučiūnas, D.| Rimkus, A.| Przybyła, G.| Droździel, P.| Barta, D.	2021	Applied Sciences (Switzerland)	10.3390/app11020742
The oxide scales formed on different co-ni based superalloys during isothermal oxidation at 800 and 900°C	MIGAS, D.| KIERAT, M.| MOSKAL, G.	2021	Archives of Metallurgy and Materials	10.24425/amm.2021.134752
Quaternion statistics applied to the classification of motion capture data	Świtoński, A.| Josiński, H.| Michalczuk, A.| Wojciechowski, K.	2021	Expert Systems with Applications	10.1016/j.eswa.2020.113813
Comparative tribocorrosion tests of 30CrMo12 cast steel and ADI spheroidal cast iron	Stachowiak, A.| Wieczorek, A.N.	2021	Tribology International	10.1016/j.triboint.2020.106763
Controllability and Stability of Semilinear Fractional Order Systems	Klamka, J.| Babiarz, A.| Czornik, A.| Niezabitowski, M.	2021	Studies in Systems, Decision and Control	10.1007/978-3-030-48587-0_9
The increase in the elastic range and strengthening control of quasi brittle cement composites by low-module dispersed reinforcement: An assessment of reinforcement effects	Logoń, D.| Schabowicz, K.| Roskosz, M.| Fryczowski, K.	2021	Materials	10.3390/ma14020341
Analysis of damage to structures as a result of soil suffusion	Ślusarek, J.| Łupieżowiec, M.	2021	Engineering Failure Analysis	10.1016/j.engfailanal.2020.105058
Reconstruction of the Boundary Condition in the Binary Alloy Solidification Problem with the Macrosegregation and the Material Shrinkage Phenomena Taken into Account	Zielonka, A.| Hetmaniok, E.| Słota, D.	2021	Heat Transfer Engineering	10.1080/01457632.2019.1699300
3-d tissue image reconstruction from digitized serial histologic sections to visualize small tumor nests in lung adenocarcinomas	Pyciński, B.| Yagi, Y.| Walts, A.E.| Gertych, A.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_5
Profiling and fingerprinting strategies to assess exposure of edible plants to herbicides	Barchanska, H.| Tang, J.| Fang, X.| Danek, M.| Płonka, J.| Sajdak, M.	2021	Food Chemistry	10.1016/j.foodchem.2020.127658
The application of electrodialysis in synthesis of oligoglycerols from glycerol and epichlorohydrin via Williamson reaction	Milewski, A.| Babilas, D.| Czechowicz, D.| Dydo, P.	2021	Separation and Purification Technology	10.1016/j.seppur.2020.117716
Analysis of the Ability to Maintain the Balance of Veterans of Stabilization Missions	Wodarski, P.| Jurkojć, J.| Chmura, M.| Bieniek, A.| Guzik-Kopyto, A.| Michnik, R.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_22
Through scale material flow investigation in novel incremental bulk forming process	Szyndler, J.| Grosman, F.| Tkocz, M.| Delannay, L.| Wang, J.| Muszka, K.| Madej, L.	2021	Journal of Materials Processing Technology	10.1016/j.jmatprotec.2019.116487
Deep learning approach to subepidermal low echogenic band segmentation in high frequency ultrasound	Czajkowska, J.| Dziurowicz, W.| Badura, P.| Korzekwa, S.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_1
Influence of chemical structure on thermal, optical and electrochemical properties of conjugated azomethines	Nitschke, P.| Jarząbek, B.| Vasylieva, M.| Honisz, D.| Małecki, J.G.| Musioł, M.| Janeczek, H.| Chaber, P.	2021	Synthetic Metals	10.1016/j.synthmet.2020.116689
Study of impact of bed joint reinforcement on load-carrying capacity and crack resistance of masonry walls made of calcium silicate units	Łukasz, D.	2021	Journal of Building Engineering	10.1016/j.jobe.2020.101841
Dynamical diversity of mitochondrial BK channels located in different cell types	Wawrzkiewicz-Jałowiecka, A.| Trybek, P.| Machura, Ł.| Bednarczyk, P.	2021	BioSystems	10.1016/j.biosystems.2020.104310
Analysis of the mechanical properties of the titanium layer obtained by the mold cavity preparation method	DULSKA, A.| SZAJNAR, J.| KRÓL, M.	2021	Archives of Metallurgy and Materials	10.24425/amm.2021.134758
Numerical model of the aortic valve implanted within real human aorta	Nowak, M.| Adamczyk, W.| Melka, B.| Ostrowski, Z.| Bialecki, R.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-49666-1_21
Diagnostics of Rotary Vane Vacuum Pumps Using Signal Processing, Analysis and Clustering Methods	Łój, P.| Cholewa, W.	2021	Studies in Systems, Decision and Control	10.1007/978-3-030-58964-6_8
A sitting or standing position – which one exerts more loads on the musculoskeletal system of the lumbar spine? Comparative tests based on the methods of mathematical modelling	Zadoń, H.| Nowakowska-Lipiec, K.| Michnik, R.	2021	Acta of Bioengineering and Biomechanics	10.37190/ABB-01762-2020-01
Analysis of Dynamics of the Blast Mitigation Seat	Kciuk, S.| Bienioszek, G.| Krzystała, E.	2021	Advances in Intelligent Systems and Computing	10.1007/978-3-030-52180-6_13
New forms of the fundamental solutions for 3D magnetoelectroelasticity equations	Dziatkiewicz, G.	2021	Applied Mathematical Modelling	10.1016/j.apm.2020.09.052
Examples of simulation of the alloying elements effect on austenite transformations during continuous cooling	TRZASKA, J.	2021	Archives of Metallurgy and Materials	10.24425/amm.2021.134791
Efficient technique of impulsive noise detection and replacement in color digital images	Smolka, B.	2021	Smart Innovation, Systems and Technologies	10.1007/978-981-15-4917-5_14
Bonding effect of liquid magnesium with open-celled carbon foam in interpenetrating phase composite	Godzierz, M.| Olszówka-Myalska, A.| Sobczak, N.| Nowak, R.| Wrześniowski, P.	2021	Journal of Magnesium and Alloys	10.1016/j.jma.2020.06.006
Wound 3D Geometrical Feature Estimation Using Poisson Reconstruction	Juszczyk, J.M.| Wijata, A.| Czajkowska, J.| Krecichwost, M.| Rudzki, M.| Biesok, M.| Pycinski, B.| Majewski, J.| Kostecki, J.| Pietka, E.	2021	IEEE Access	10.1109/ACCESS.2020.3035125
Introduction	Kubica, M.| Opara, A.| Kania, D.	2021	Lecture Notes in Electrical Engineering	10.1007/978-3-030-60488-2_1
Kinematics of the retractable roofing module constructed from three roof panels	Pawlak-Jakubowska, A.| Romaniak, K.	2021	Journal of Building Engineering	10.1016/j.jobe.2021.102169
Structure and corrosion behavior of TiO2 thin films deposited by ALD on a biomedical magnesium alloy	Kania, A.| Szindler, M.M.| Szindler, M.	2021	Coatings	10.3390/coatings11010070