A A+ A++

Publikacje naukowe POB3





Experimental and numerical research on the effect of the inlet steam superheat degree on the spontaneous condensation in the IWSEP nozzleZhang, G.| Dykas, S.| Majkut, M.| Smołka, K.| Cai, X.2021International Journal of Heat and Mass Transfer10.1016/j.ijheatmasstransfer.2020.120654
Body Pose Prediction Based on Motion Sensor Data and Recurrent Neural NetworkWozniak, M.| Wieczorek, M.| Silka, J.| Polap, D.2021IEEE Transactions on Industrial Informatics10.1109/TII.2020.3015934
Acoustic radiation-based optimization of the placement of actuators for active control of noise transmitted through platesWrona, S.| Pawelczyk, M.| Cheer, J.2021Mechanical Systems and Signal Processing10.1016/j.ymssp.2020.107009
Effects of the sources of calcium and phosphorus on the structural and functional properties of ceramic coatings on titanium dental implants produced by plasma electrolytic oxidationKyrylenko, S.| Warchoł, F.| Oleshko, O.| Husak, Y.| Kazek-Kęsik, A.| Korniienko, V.| Deineka, V.| Sowa, M.| Maciej, A.| Michalska, J.| Jakóbik-Kolon, A.| Matuła, I.| Basiaga, M.| Hulubnycha, V.| Stolarczyk, A.| Pisarek, M.| Mishchenko, O.| Pogorielov, M.| Simka, W.2021Materials Science and Engineering C10.1016/j.msec.2020.111607
Methods for assessing the subject’s multidimensional psychophysiological state in terms of proper rehabilitationMańka, A.| Romaniszyn, P.| Bugdol, M.N.| Mitas, A.W.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_17
Effect of the mechanical properties of carbon-based coatings on the mechanics of cell–material interactionsTrembecka-Wójciga, K.| Kopernik, M.| Surmiak, M.| Major, R.| Gawlikowski, M.| Bruckert, F.| Kot, M.| Lackner, J.M.2021Colloids and Surfaces B: Biointerfaces10.1016/j.colsurfb.2020.111359
A Comprehensive Analysis of Error Sources in Electronic Fully Digital Impedance BridgesOrtolano, M.| Marzano, M.| D'Elia, V.| Mai Tran, N.T.| Rybski, R.| Kaczmarek, J.| Kozioł, M.| Musioł, K.| Christensen, A.E.| Callegaro, L.| Kucera, J.| Power, O.2021IEEE Transactions on Instrumentation and Measurement10.1109/TIM.2020.3034115
Assessing mma welding process stability using machine vision-based arc features tracking systemJamrozik, W.| Górka, J.2021Sensors (Switzerland)10.3390/s21010084
The friction and wear behaviour of in-situ titanium carbide reinforced composite layers manufactured on ductile cast iron by laser surface alloyingJanicki, D.2021Surface and Coatings Technology10.1016/j.surfcoat.2020.126634
Methods of therapy of scoliosis and technical functionalities of disc4spine (d4s) diagnostic and therapeutic systemSzurmik, T.| Bibrowicz, K.| Lipowicz, A.| Mitas, A.W.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_16
Multimodal signal acquisition for pain assessment in physiotherapyBadura, A.| Bieńkowska, M.| Masłowska, A.| Czarlewski, R.| Myśliwiec, A.| Pietka, E.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_18
Steel production, consumption and foreign trade in poland in crises: The financial crisis 2008-2009 and the covid-19 crisis – first half of 2020Gajdzik, B.2021Metalurgija-
Investigations of the high-performance source of digitally synthesized sinusoidal voltage for primary impedance metrologyKampik, M.| Musioł, K.2021Measurement: Journal of the International Measurement Confederation10.1016/j.measurement.2020.108308
The classifier algorithm for recognition of basic driving scenariosDoniec, R.| Sieciński, S.| Piaseczna, N.| Mocny-Pachońska, K.| Lang, M.| Szymczyk, J.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_28
Behavioral and physiological profile analysis while exercising—case studyRomaniszyn, P.| Kania, D.| Bugdol, M.N.| Pollak, A.| Mitas, A.W.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_13
Enhanced massivity index based on evidence from case studies: Towards a robust pre-design assessment of early-age thermal cracking risk and practical recommendationsKanavaris, F.| Jędrzejewska, A.| Sfikas, I.P.| Schlicke, D.| Kuperman, S.| Šmilauer, V.| Honório, T.| Fairbairn, E.M.R.| Valentim, G.| Funchal de Faria, E.| Azenha, M.2021Construction and Building Materials10.1016/j.conbuildmat.2020.121570
Red fox optimization algorithmPołap, D.| Woźniak, M.2021Expert Systems with Applications10.1016/j.eswa.2020.114107
Study of Strength and Fatigue of Stainless Steel and Titanium PlatesKajzer, A.| Niedźwiedź, S.| Kajzer, W.| Marciniak, J.| Gzik-Zroska, B.| Joszko, K.| Kaczmarek, M.| Pilecki, Z.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_29
Predictive maintenance scheduling with reliability characteristics depending on the phase of the machine life cyclePaprocka, I.| Kempa, W.M.| Skołud, B.2021Engineering Optimization10.1080/0305215X.2020.1714041
Innovative bioactive ag-sio2/tio2 coating on a niti-shape memory alloy: Structure and mechanism of its formationDulski, M.| Balcerzak, J.| Simka, W.| Dudek, K.2021Materials10.3390/ma14010099
Stability of discrete-time fractional-order time-delayed neural networks in complex fieldPratap, A.| Raja, R.| Cao, J.| Huang, C.| Niezabitowski, M.| Bagdasar, O.2021Mathematical Methods in the Applied Sciences10.1002/mma.6745
Application of original system to support specialist physiotherapy d4s in correction of postural defects as compared to other methods—a reviewBibrowicz, K.| Szurmik, T.| Lipowicz, A.| W. Mitas, A.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_15
A Simulated Annealing Based Method for Sequencing Problem in Mixed Model Assembly LinesKrenczyk, D.| Dziki, K.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-57802-2_32
Clustering based multiple state–space projectionsKotas, M.P.| Dyrek, A.| Piela, M.| Leski, J.M.2021Signal Processing10.1016/j.sigpro.2020.107762
Possible Use of Fuzzy Sets Similarity for Patient’s Parameters ObservationStraszecka, E.| Pander, T.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-47024-1_11
Rotating bed reactor packed with heterofunctional structured silica-supported lipase. Developing an effective system for the organic solvent and aqueous phase reactionsKowalczykiewicz, D.| Szymańska, K.| Gillner, D.| Jarzębski, A.B.2021Microporous and Mesoporous Materials10.1016/j.micromeso.2020.110789
ProteinUnet—An efficient alternative to SPIDER3-single for sequence-based prediction of protein secondary structuresKotowski, K.| Smolarczyk, T.| Roterman-Konieczna, I.| Stapor, K.2021Journal of Computational Chemistry10.1002/jcc.26432
Analog circuits specification driven testing by means of digital stream and non-linear estimation model optimized evolutionarilyGOLONEK, T.| CHRUSZCZYK, Ł.2021Bulletin of the Polish Academy of Sciences: Technical Sciences10.24425/bpasts.2020.135390
Comprehensive hydrothermal analysis of an inclined mini-channel with fin array: by dual/multi-relaxation-time LBM and experimental process on SiO2-glycol rheological/thermal characteristicsKamali, D.| Hejri, S.| Akbar, N.| Hasani Malekshah, E.2021International Journal of Numerical Methods for Heat and Fluid Flow10.1108/HFF-08-2020-0527
The effect of turbulence on mass transfer in solid fuel combustion: RANS modelKarchniwy, E.| Haugen, N.E.L.| Klimanek, A.| Langørgen, Ø.| Sładek, S.2021Combustion and Flame10.1016/j.combustflame.2020.12.040
Correlations of thermal properties with grain structure, morphology, and defect balance in nanoscale polycrystalline ZnO filmsKaźmierczak-Bałata, A.| Grządziel, L.| Guziewicz, M.| Venkatachalapathy, V.| Kuznetsov, A.| Krzywiecki, M.2021Applied Surface Science10.1016/j.apsusc.2021.149095
Mechanical stability of retained austenite in aluminum-containing medium-Mn steel deformed at different temperaturesKozłowska, A.| Radwański, K.| Matus, K.| Samek, L.| Grajcar, A.2021Archives of Civil and Mechanical Engineering10.1007/s43452-021-00177-8
Binary Decision DiagramsKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_3
Polypropylene-matrix polymer composites with natural fillerWłodarczyk-FLIGIER, A.| POLOK-RUBINIEC, M.| CHMIELNICKI, B.2021Archives of Metallurgy and Materials10.24425/amm.2021.134789
The influence of ZnO oxide layer on the physicochemical behavior of Ti6Al4V titanium alloyWozniak, A.| Walke, W.| Jakóbik-Kolon, A.| Ziębowicz, B.| Brytan, Z.| Adamiak, M.2021Materials10.3390/ma14010230
Heterogeneous and dependable networks in industry – A surveyScanzio, S.| Wisniewski, L.| Gaj, P.2021Computers in Industry10.1016/j.compind.2020.103388
In silico study on the effects of carbonyl groups on chemical equilibrium of reactions with a polar product occurring under confinement in pores of activated carbonsFurmaniak, S.| Gauden, P.A.| Patrykiejew, A.| Szymański, G.| Miśkiewicz, R.| Kowalczyk, P.2021Chemical Engineering Communications10.1080/00986445.2019.1700115
Influence of Music on HRV Indices Derived from ECG and SCGSieciński, S.| Kostka, P.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_39
Vibration busters: An interdisciplinary approach to learning of dynamical systemsWalentyński, R.| Słota, D.| Szczygieł, M.2021ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik10.1002/zamm.202000110
Efficient, low-cost optical coupling mechanism for TiO2-SiO2sol-gel derived slab waveguide surface grating coupler sensorsKaźmierczak, A.| Słowikowski, M.| Pavłov, K.| Filipiak, M.| Vervaeke, M.| Tyszkiewicz, C.| Ottevaere, H.| Piramidowicz, R.| Karasiński, P.2021Optica Applicata10.37190/OA200403
Hand Grip Strength and Suppleness as Progress Determinants in Female Pole Dancers’ TrainingMikula, B.| Wolny, S.| Nowakowska, K.| Guzik-Kopyto, A.| Chuchnowska, I.| Michnik, R.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_20
Segmentation and Registration of High-Frequency Ultrasound Images of Superficial VeinsPyciński, B.| Czajkowska, J.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_37
Heavy-Atom-Free Room-Temperature Phosphorescent Organic Light-Emitting Diodes Enabled by Excited States EngineeringHigginbotham, H.F.| Okazaki, M.| De Silva, P.| Minakata, S.| Takeda, Y.| Data, P.2021ACS Applied Materials and Interfaces10.1021/acsami.0c17295
Selecting optimal conditions for the turbine warm and hot start-upRusin, A.| Nowak, G.| Łukowicz, H.| Kosman, W.| Chmielniak, T.| Kaczorowski, M.2021Energy10.1016/j.energy.2020.118836
An 18-month analysis of bond strength of hot-dip galvanized reinforcing steel b500sp and s235jr+ar to chloride contaminated concreteJaśniok, M.| Kołodziej, J.| Gromysz, K.2021Materials10.3390/ma14040747
Effects of modifying the hypoeutectic AlMg5Si2Mn alloy via addition of Al10Sr and/or Al5TiBSnopiński, P.| Król, M.| Wróbel, T.| Matus, K.| Woźniak, A.| Tański, T.| Palček, P.2021Archives of Civil and Mechanical Engineering10.1007/s43452-020-00147-6
Simulation of biomass combustion with modified flue gas tractKantová, N.Č.| Sładek, S.| Jandačka, J.| Čaja, A.| Nosek, R.2021Applied Sciences (Switzerland)10.3390/app11031278
Partial Sharing of Logic ResourcesKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_9
Microchamber microfluidics combined with thermogellable glycomicrogels – Platform for single cells study in an artificial cellular microenvironmentStudent, S.| Milewska, M.| Ostrowski, Z.| Gut, K.| Wandzik, I.2021Materials Science and Engineering C10.1016/j.msec.2020.111647
Quercetin as a natural therapeutic candidate for the treatment of influenza virusMehrbod, P.| Hudy, D.| Shyntum, D.| Markowski, J.| Łos, M.J.| Ghavami, S.2021Biomolecules10.3390/biom11010010
Upperbounds on the probability of finding marked connected components using quantum walksGlos, A.| Nahimovs, N.| Balakirev, K.| Khadiev, K.2021Quantum Information Processing10.1007/s11128-020-02939-4
Tuning rules for industrial use of the second-order reduced active disturbance rejection controllerNowak, P.| Czeczot, J.| Grelewicz, P.2021Archives of Control Sciences10.24425/acs.2020.135848
Trajectory of Fifths in Music Data MiningKania, D.| Kania, P.| Lukaszewicz, T.2021IEEE Access10.1109/ACCESS.2021.3049266
Kinematics of the retractable roofing module constructed from three roof panels with stiffening of the central panelPawlak-Jakubowska, A.| Romaniak, K.2021Structures10.1016/j.istruc.2020.11.030
Technology Mapping of Logic Functions in LUT BlocksKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_11
Electrodialysis enhanced with disodium EDTA as an innovative method for separating Cu(II) ions from zinc salts in wastewaterBabilas, D.| Muszyński, J.| Milewski, A.| Leśniak-Ziółkowska, K.| Dydo, P.2021Chemical Engineering Journal10.1016/j.cej.2020.127908
Numerical investigation of the vibro-acoustic response of functionally graded lightweight square panel at low and mid-frequency regionsIsaac, C.W.| Wrona, S.| Pawelczyk, M.| Roozen, N.B.2021Composite Structures10.1016/j.compstruct.2020.113460
Evaluation of a micro-cogeneration unit with integrated electrical energy storage for residential applicationUchman, W.| Kotowicz, J.| Li, K.F.2021Applied Energy10.1016/j.apenergy.2020.116196
Decomposition of Multioutput Functions Described Using BDDKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_8
Mitigation of phase noise and nonlinearities for high capacity radio-over-fiber linksKhan, M.K.A.| Ali, F.| Irfan, M.| Muhammad, F.| Althobiani, F.| Ali, A.| Khan, S.| Rahman, S.| Perun, G.| Glowacz, A.2021Electronics (Switzerland)10.3390/electronics10030345
Use of n-perturbation interval ray tracing method in predicting acoustic field distributionWinkler-Skalna, A.| Nowoświat, A.2021Applied Mathematical Modelling10.1016/j.apm.2020.12.028
Bias arising from 222Rn contamination in standardized methods for biobased content determination and a simple removal methodTudyka, K.| Pawełczyk, F.| Michczyński, A.2021Measurement: Journal of the International Measurement Confederation10.1016/j.measurement.2020.108263
Article electrochemical oxidation of Ti15Mo alloy—the impact of anodization parameters on surface morphology of nanostructured oxide layersJarosz, M.| Zaraska, L.| Kozieł, M.| Simka, W.| Sulka, G.D.2021Nanomaterials10.3390/nano11010068
Pyrite thermal decomposition in source rocksLabus, M.2021Fuel10.1016/j.fuel.2020.119529
Algorithms for Decomposition and Technological MappingKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_14
Impact of current pulsation on BLDC motor parametersSikora, A.| Woźniak, M.2021Sensors (Switzerland)10.3390/s21020587
Semi-active links in double-panel noise barriersWrona, S.| Pawelczyk, M.| Cheng, L.2021Mechanical Systems and Signal Processing10.1016/j.ymssp.2020.107542
Measurement-based modelling of material moisture and particle classification for control of copper ore dry grinding processKrauze, O.| Buchczik, D.| Budzan, S.2021Sensors (Switzerland)10.3390/s21020667
Methods supporting the understanding of structural information by blind people and selected aspects of their evaluationMaćkowski, M.| Rojewska, K.| Dzieciątko, M.| Bielecka, K.| Bas, M.| Spinczyk, D.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_24
Comparison of a Thermal AC Voltage Standard in the 1-30-MHz Frequency RangeKampik, M.| Grzenik, M.| Lippert, T.| Rydler, K.-E.| Tarasso, V.| Trinchera, B.2021IEEE Transactions on Instrumentation and Measurement10.1109/TIM.2020.3007296
Removal of heavy metal ions from wastewaters: An application of sodium trithiocarbonate and wastewater toxicity assessmentThomas, M.| Kozik, V.| Bąk, A.| Barbusiński, K.| Jazowiecka‐rakus, J.| Jampilek, J.2021Materials10.3390/ma14030655
PLC implementation in the form of a system-on-a-chipMAZUR, P.| CZERWINSKI, R.| CHMIEL, M.2021Bulletin of the Polish Academy of Sciences: Technical Sciences10.24425/bpasts.2020.135386
An assessment of the thermal behavior of envelope surface coatings with different colorsPokorska-Silva, I.| Kadela, M.| Małek, M.| Fedorowicz, L.2021Polymers10.3390/polym13010082
Carbon dioxide capture using water-imidazolium ionic liquids-amines ternary systemsZalewski, M.| Krawczyk, T.| Siewniak, A.| Sobolewski, A.2021International Journal of Greenhouse Gas Control10.1016/j.ijggc.2020.103210
Comparison of the properties of natural sorbents for the calcium looping processLabus, K.2021Materials10.3390/ma14030548
Technology as a Support for Rehabilitation Patients After StrokeKania, D.| Romaniszyn, P.| Mańka, A.| Ledwoń, D.| Łysień, A.| Nawrat–Szołtysik, A.| Danch–Wierzchowska, M.| Michnik, R.| Mitas, A.| Myśliwiec, A.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_24
Assessment of the hot cracking susceptibility of the inconel 617 nickel-based alloyADAMIEC, J.| KONIECZNA, N.2021Archives of Metallurgy and Materials10.24425/amm.2021.134781
An experimental investigation of performance and instabilities of the R744 vapour compression rack equipped with a two-phase ejector based on short-term, long-term and unsteady operationsHaida, M.| Palacz, M.| Bodys, J.| Smolka, J.| Gullo, P.| Nowak, A.J.2021Applied Thermal Engineering10.1016/j.applthermaleng.2020.116353
Projective Filtering with Adaptive Selected Projective DimensionsPrzybyła, T.| Pander, T.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-47024-1_26
Experimental investigation using distributed optical fiber sensor measurements in unbound granular layersBzówka, J.| Grygierek, M.| Rokitowski, P.2021Engineering Structures10.1016/j.engstruct.2020.111767
The properties of a polypropylene matrix composite with anthracite fillerPOLOK-RUBINIEC, M.| Włodarczyk-FLIGIER, A.| CHMIELNICKI, B.2021Archives of Metallurgy and Materials10.24425/amm.2021.134788
Insight into thermal stress distribution and required reinforcement reducing early-age cracking in mass foundation slabsKlemczak, B.| Żmij, A.2021Materials10.3390/ma14030477
Decomposition of Functions Described Using BDDKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_5
Pancreas and duodenum—automated organ segmentationZarychta, P.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_8
Effective elastic properties of composites with randomly distributed thin rigid fibresFedelinski, P.2021Archive of Applied Mechanics10.1007/s00419-020-01758-4
In vitro and in vivo efficacy of a novel glucose–methotrexate conjugate in targeted cancer treatmentWoźniak, M.| Pastuch-Gawołek, G.| Makuch, S.| Wiśniewski, J.| Krenács, T.| Hamar, P.| Gamian, A.| Szeja, W.| Szkudlarek, D.| Krawczyk, M.| Agrawal, S.2021International Journal of Molecular Sciences10.3390/ijms22041748
Numerical investigation on fire accident and evacuation in a urban tunnel for different traffic conditionsKról, A.| Król, M.2021Tunnelling and Underground Space Technology10.1016/j.tust.2020.103751
Performance of damage identification based on directional wavelet transforms and entopic weights using experimental shearographic testing resultsKatunin, A.2021Sensors (Switzerland)10.3390/s21030714
Analysis of the work of a “renewable” methanol production installation based ON H2 from electrolysis and CO2 from power plantsKotowicz, J.| Węcel, D.| Brzęczek, M.2021Energy10.1016/j.energy.2020.119538
Damage identification by wavelet analysis of modal rotation differencesKatunin, A.| Araújo dos Santos, J.V.| Lopes, H.2021Structures10.1016/j.istruc.2021.01.010
Bioactive betulin and peg based polyanhydrides for use in drug delivery systemsNiewolik, D.| Bednarczyk-Cwynar, B.| Ruszkowski, P.| Sosnowski, T.R.| Jaszcz, K.2021International Journal of Molecular Sciences10.3390/ijms22031090
Study of Physicochemical Properties of CoCrMo Alloy with PLCL Polymer Coating Intended for UrologyKajzer, W.| Niścior, P.| Kajzer, A.| Basiaga, M.| Szewczenko, J.| Jaworska, J.| Jelonek, K.| Kasperczyk, J.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_28
An analytical solution to the problem of a cup-cored coil located over a conducting plate with a holeTytko, G.| Kowalik, Z.2021Insight: Non-Destructive Testing and Condition Monitoring10.1784/INSI.2020.62.12.718
Identification of structural damage using S-transform from 1D and 2D mode shapesKatunin, A.2021Measurement: Journal of the International Measurement Confederation10.1016/j.measurement.2020.108656
Deep learning approach to automated segmentation of tongue in camera images for computer-aided speech diagnosisSage, A.| Miodońska, Z.| Kręcichwost, M.| Trzaskalik, J.| Kwaśniok, E.| Badura, P.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_4
The use of waste, fine-grained carbonaceous material in the process of copper slag reductionŁabaj, J.| Blacha, L.| Jodkowski, M.| Smalcerz, A.| Fröhlichová, M.| Findorak, R.2021Journal of Cleaner Production10.1016/j.jclepro.2020.125640
Analysis of ultrashort laser pulse irradiation with 2d thin metal films using the fuzzy lattice boltzmann methodPiasecka-Belkhayat, A.| Korczak, A.2021Journal of Theoretical and Applied Mechanics (Poland)10.15632/jtam-pl/115448
Exchange bias in thin films—an updateBlachowicz, T.| Ehrmann, A.2021Coatings10.3390/coatings11020122
The Study of Electrochemical Properties of Surface Modified Casting Alloys Used in Dental ProstheticsZibowicz, A.| Woźniak, A.| Zibowicz, B.| Chladek, G.| Boryło, P.| Walke, W.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_33
Impact of the Heat Transfer Coefficient Determination Method on the Simulation of the Operation of Fin-and-Tube Cross-Flow Heat Exchangers at a Non-Uniform Inflow of MediumsBury, T.| Hanuszkiewicz-Drapała, M.2021Heat Transfer Engineering10.1080/01457632.2019.1699288
Flow in a myocardial bridge region of a coronary artery—experimental rig and numerical modelMelka, B.| Nowak, M.| Rojczyk, M.| Gracka, M.| Adamczyk, W.| Ostrowski, Z.| Bialecki, R.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_20
Multimodal signal analysis for pain recognition in physiotherapy using wavelet scattering transformBadura, A.| Masłowska, A.| Myśliwiec, A.| Piętka, E.2021Sensors (Switzerland)10.3390/s21041311
Smart Homes: How Much Will They Support Us? A Research on Recent Trends and AdvancesZielonka, A.| Wozniak, M.| Garg, S.| Kaddoum, G.| Piran, M.J.| Muhammad, G.2021IEEE Access10.1109/ACCESS.2021.3054575
Tuning the electrochemical and optical properties of donor-acceptor D-A2-A1-A2-D derivatives with central benzothiadiazole core by changing the A2 strengthPluczyk-Malek, S.| Honisz, D.| Akkuratov, A.| Troshin, P.| Lapkowski, M.2021Electrochimica Acta10.1016/j.electacta.2020.137540
Simulation Investigation of Occlusal Loads Transfer in Personalized Titanium Plates in the Case of Jaw OsteotomyBobik, G.| Żmudzki, J.| Tański, T.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_11
Structuring of the Ti6Al4V alloy surface by pulsed laser remeltingGrabowski, A.| Florian, T.| Wieczorek, J.| Adamiak, M.2021Applied Surface Science10.1016/j.apsusc.2020.147618
Evaluation of the applicability of polymeric materials to BTEX and fine product transformation by catalytic and non-catalytic pyrolysis as a part of the closed loop material economyGałko, G.| Rejdak, M.| Tercki, D.| Bogacka, M.| Sajdak, M.2021Journal of Analytical and Applied Pyrolysis10.1016/j.jaap.2021.105017
Theoretical Basis of DecompositionKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_4
Micellar carriers of active substances based on amphiphilic PEG/PDMS heterograft copolymers: Synthesis and biological evaluation of safe use on skinOdrobińska, J.| Skonieczna, M.| Neugebauer, D.2021International Journal of Molecular Sciences10.3390/ijms22031202
Application of systematic scanning and variance analysis method to evaluation of pores arrangement in sintered steelRoskosz, S.| Chrapoński, J.| Madej2021Measurement: Journal of the International Measurement Confederation10.1016/j.measurement.2020.108325
Effect of various types of metro-rhythmic stimulations on the variability of gait frequencyMichnik, R.| Nowakowska-Lipiec, K.| Mańka, A.| Niedzwiedź, S.| Twardawa, P.| Romaniszyn, P.| Turner, B.| Danecka, A.| W. Mitas, A.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_10
Effective doping of single-walled carbon nanotubes with polyethyleneimineRdest, M.| Janas, D.2021Materials10.3390/ma14010065
Properties of expanded graphite polystyrene damaged by the impact of solar radiationNowoświat, A.| Krause, P.| Miros, A.2021Journal of Building Engineering10.1016/j.jobe.2020.101920
Advanced computational intelligence for object detection, feature extraction and recognition in smart sensor environmentsWoźniak, M.2021Sensors (Switzerland)10.3390/s21010045
Risk management system in metallurgical productionKarkoszka, T.2021Metalurgija-
Use of 3D Printing in Designing Sensor Overlays Used to Determine the Foot Pressure Distribution on the GroundDuda, S.| Gembalczyk, G.| Machoczek, T.| Szyszka, P.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_16
Determination of Heat Transfer Coefficient for Array of Free Surface Water JetsRyfa, A.| Rojczyk, M.| Adamczyk, W.2021Heat Transfer Engineering10.1080/01457632.2019.1699298
Evaluation of Transverse Abdominal Muscles Impact on Body PostureGzik-Zroska, B.| Kocjan, J.| Nowakowska, K.| Purgoł, P.| Burkacki, M.| Suchoń, S.| Joszko, K.| Michnik, R.| Adamek, M.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_4
Ferromagnetic coil frequency response and dynamics modeling with fractional elementsSowa, M.2021Electrical Engineering10.1007/s00202-020-01190-5
Hexapod robot gait switching for energy consumption and cost of transport management using heuristic algorithmsLuneckas, M.| Luneckas, T.| Kriaučiūnas, J.| Udris, D.| Plonis, D.| Damaševičius, R.| Maskeliūnas, R.2021Applied Sciences (Switzerland)10.3390/app11031339
The method of production scheduling with uncertainties using the ants colony optimisationPaprocka, I.| Krenczyk, D.| Burduk, A.2021Applied Sciences (Switzerland)10.3390/app11010171
The Concept of Genetic Algorithm Application for Scheduling Operations with Multi-resource RequirementsPaprocka, I.| Kalinowski, K.| Balon, B.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-57802-2_33
Characteristics of some selected methods of rare earth elements recovery from coal fly ashesRybak, A.| Rybak, A.2021Metals10.3390/met11010142
Modelling of technological parameters of aluminium melt refining in the ladle by blowing of inert gas through the rotating impellerWalek, J.| Michalek, K.| Tkadlečková, M.| Saternus, M.2021Metals10.3390/met11020284
Influence of elemental carbon (EC) coating covering Nc-(Ti,Mo)C particles on the microstructure and properties of titanium matrix composites prepared by reactive spark plasma sinteringBiedunkiewicz, A.| Figiel, P.| Garbiec, D.| Obrosov, A.| Pawlyta, M.| Biedunkiewicz, W.| Pruss, P.| Rokosz, K.| Wróbel, R.| Raaen, S.| Weiß, S.| Bokov, D.2021Materials10.3390/ma14010231
Temperature-based prediction of joint hardness in TIG welding of inconel 600, 625 and 718 nickel superalloysJamrozik, W.| Górka, J.| Kik, T.2021Materials10.3390/ma14020442
Key properties of a bioactive ag-sio2 /tio2 coating on niti shape memory alloy as necessary at the development of a new class of biomedical materialsDulski, M.| Gawecki, R.| Sułowicz, S.| Cichomski, M.| Kazek-Kęsik, A.| Wala, M.| Leśniak-Ziółkowska, K.| Simka, W.| Mrozek-Wilczkiewicz, A.| Gawęda, M.| Sitarz, M.| Dudek, K.2021International Journal of Molecular Sciences10.3390/ijms22020507
Analysis of DC reversal error of the calorimetric thermal voltage converterKubiczek, K.| Kampik, M.| Grzenik, M.2021Measurement: Journal of the International Measurement Confederation10.1016/j.measurement.2020.108439
Corrigendum to “Assessment of improvement in the energy and exergy efficiency of the gas heat plant after the exhaust gas cooled down below the dew point and the use of recovered heat” [Energy 190 (1 January 2020) 116179] (Energy (2020) 190, (S0360544219318742), (10.1016/j.energy.2019.116179))Ostrowski, P.| Szelejewski, F.| Zymelka, P.2021Energy10.1016/j.energy.2020.119633
Carbon nanotube materials for electrocardiographyKolanowska, A.| Herman, A.P.| Jȩdrysiak, R.G.| Boncel, S.2021RSC Advances10.1039/d0ra08679g
Robustness of Pathway Enrichment Analysis to Transcriptome-Wide Gene Expression PlatformZyla, J.| Leszczorz, K.| Polanska, J.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-54568-0_18
Similarity of Parts Determined by Semantic Networks as the Basis for Manufacturing Cost EstimationĆwikła, G.| Bańczyk, K.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-57802-2_31
The possibilities of cooperation between a hydrogen generator and a wind farmKotowicz, J.| Jurczyk, M.| Węcel, D.2021International Journal of Hydrogen Energy10.1016/j.ijhydene.2020.11.246
Utilization of waste coal flotation concentrate for copper matte smeltingŁabaj, J.| Blacha, L.| Smalcerz, A.| Wieczorek, J.| Frӧhlichová, M.| Vadasz, P.| Findorak, R.| Niesler, M.2021Engineering Science and Technology, an International Journal10.1016/j.jestch.2021.01.003
Computer-based analysis of spontaneous infant activity: A pilot studyDoroniewicz, I.| Ledwoń, D.| Bugdol, M.N.| Kieszczyńska, K.| Affanasowicz, A.| Matyja, M.| Badura, D.| Mitas, A.W.| Myśliwiec, A.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_12
Deep learning based evaluation of spermatozoid motility for artificial inseminationValiuškaitė, V.| Raudonis, V.| Maskeliūnas, R.| Damaševičius, R.| Krilavičius, T.2021Sensors (Switzerland)10.3390/s21010072
Corrosion inhibitor-modified plasma electrolytic oxidation coatings on 6061 aluminum alloySowa, M.| Wala, M.| Blacha-Grzechnik, A.| Maciej, A.| Kazek-Kęsik, A.| Stolarczyk, A.| Simka, W.2021Materials10.3390/ma14030619
Hot deformation activation energy of metallic materials influenced by strain valueSCHINDLER, I.| Opěla, P.| KAWULOK, P.| SAUER, M.| RUSZ, S.| KUC, D.| RODAK, K.2021Archives of Metallurgy and Materials10.24425/amm.2021.134779
Global existence and stability of Nicholson blowflies model with harvesting and random effectAbbas, S.| Niezabitowski, M.| Grace, S.R.2021Nonlinear Dynamics10.1007/s11071-020-06196-z
Effect of aluminium powder on kaolin-based geopolymer characteristic and removal of Cu2+Ariffin, N.| Abdullah, M.M.A.B.| Postawa, P.| Rahim, S.Z.A.| Zainol, M.R.R.M.A.| Jaya, R.P.| Śliwa, A.| Omar, M.F.| Wysłocki, J.J.| Błoch, K.| Nabiałek, M.2021Materials10.3390/ma14040814
The analysis of similarities between the European Union countries in terms of the level and structure of the emissions of selected gases and air pollutants into the atmosphereBrodny, J.| Tutak, M.2021Journal of Cleaner Production10.1016/j.jclepro.2020.123641
A review of the crashworthiness performance of energy absorbing composite structure within the context of materials, manufacturing and maintenance for sustainabilityIsaac, C.W.| Ezekwem, C.2021Composite Structures10.1016/j.compstruct.2020.113081
Application of machine-learning methods to recognize mitoBK Channels from different cell types based on the experimental patch-clamp resultsRichter-Laskowska, M.| Trybek, P.| Bednarczyk, P.| Wawrzkiewicz-Jałowiecka, A.2021International Journal of Molecular Sciences10.3390/ijms22020840
Psychophysiological state changes assesment based on thermal face image—preliminary resultsDanch-Wierzchowska, M.| Bugdol, M.| W. Mitas, A.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_14
Modification of nZVI with a bio-conjugate containing amine and carbonyl functional groups for catalytic activation of persulfateSilvestri, D.| Wacławek, S.| Sobel, B.| Torres–Mendieta, R.| Pawlyta, M.| Padil, V.V.T.| Filip, J.| Černík, M.2021Separation and Purification Technology10.1016/j.seppur.2020.117880
Numerical modeling of heat and mass transfer during cryopreservation using interval analysisSkorupa, A.| Piasecka-Belkhayat, A.2021Applied Sciences (Switzerland)10.3390/app11010302
3D Thermal Volume Reconstruction from 2D Infrared Images—a Preliminary StudySage, A.| Ledwoń, D.| Juszczyk, J.| Badura, P.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_38
Piezoelectric nanogenerator based on lead‐free flexible pvdf‐barium titanate composite films for driving low power electronicsSahu, M.| Hajra, S.| Lee, K.| Deepti, P.| Mistewicz, K.| Kim, H.J.2021Crystals10.3390/cryst11020085
Results of ExperimentsKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_15
Modeling and control of an underactuated system for dynamic body weight supportGembalczyk, G.| Gierlak, P.| Duda, S.2021Applied Sciences (Switzerland)10.3390/app11030905
The laser alloying process of ductile cast iron surface with titaniumKotarska, A.2021Metals10.3390/met11020282
Effect of grain fractions of crushed carbon foam on morphology and thermomechanical and tribological properties of random epoxy-carbon compositesSzeluga, U.| Olszowska, K.| Pusz, S.| Myalski, J.| Godzierz, M.| Kobyliukh, A.| Tsyntsarski, B.2021Wear10.1016/j.wear.2020.203558
Ability of the Configuration of Configurable Logic BlocksKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_10
Decomposition Methods of FSM ImplementationKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_13
Strength parameters of foamed geopolymer reinforced with gfrp meshKrzywoń, R.| Dawczyński, S.2021Materials10.3390/ma14030689
Atomic layer deposited ZnO films on stainless steel for biomedical applicationsBasiaga, M.| Walke, W.| Kajzer, W.| Sambok-Kiełbowicz, A.| Szewczenko, J.| Simka, W.| Szindler, M.| Ziębowicz, B.| Lubenets, V.2021Archives of Civil and Mechanical Engineering10.1007/s43452-020-00148-5
CFD modelling of R410A flow through an expansion valve using equilibrium and modified relaxation modelsLoska, M.| Smolka, J.| Haida, M.| Kriezi, E.E.| Banasiak, K.2021Applied Thermal Engineering10.1016/j.applthermaleng.2020.116442
System with Switchings as Models of Regulatory Modules in Genomic Cell SystemsŚwierniak, A.| Ochab, M.| Puszyński, K.2021Studies in Systems, Decision and Control10.1007/978-3-030-48587-0_24
Optimization of soapstock splitting process to reduce the concentration of impurities in wastewaterBarbusiński, K.| Fajkis, S.| Szeląg, B.2021Journal of Cleaner Production10.1016/j.jclepro.2020.124459
Structural characterization of al65cu20fe15 melt-spun alloy by x-ray, neutron diffraction, high-resolution electron microscopy and mössbauer spectroscopyBabilas, R.| Młynarek, K.| Łoński, W.| Łukowiec, D.| Kadziołka-Gaweł, M.| Czeppe, T.| Temleitner, L.2021Materials10.3390/ma14010054
Ordering Variables in BDD DiagramsKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_6
Methods of Device Noise ControlPawełczyk, M.| Wrona, S.| Mazur, K.2021Studies in Systems, Decision and Control10.1007/978-3-030-48587-0_27
Evaluation of shape from shading surface reconstruction quality for liver phantomBas, M.| Spinczyk, D.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_7
The Surface Topography and Physicochemical and Mechanical Properties of Pure Titanium (CP Ti) Manufactured by Selective Laser Melting (SLM)Woźniak, A.| Adamiak, M.| Ziębowicz, B.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_25
Wear resistance of (Ti,Al)N metallic coatings for extremal working conditionsMikuła, J.| Pakuła, D.| Żukowska, L.| Gołombek, K.| Kříž, A.2021Coatings10.3390/coatings11020157
The optical parameters of TiO2 antireflection coating prepared by atomic layer deposition method for photovoltaic applicationSzindler, M.| Szindler, M.M.2021Optica Applicata10.37190/OA200412
The influence of hyperquenching temperature on microstructure and mechanical properties of alloy cast steel GX2CrNiMoCuN 25-6-3-3JURCZYK, P.| WRÓBEL, T.| BARON, C.Z.2021Archives of Metallurgy and Materials10.24425/amm.2021.134761
Influence of molding materials on the self-hardening of x46cr13 steel / grey cast iron bimetallic castingsPRZYSZLAK, N.| WRÓBEL, T.| DULSKA, A.2021Archives of Metallurgy and Materials10.24425/amm.2021.134757
Short-term scheduling of gas-fired CHP plant with thermal storage using optimization algorithm and forecasting modelsŻymełka, P.| Szega, M.2021Energy Conversion and Management10.1016/j.enconman.2021.113860
PrefacePietka, E.2021Advances in Intelligent Systems and Computing-
Nondisjoint DecompositionKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_7
Chart Design Method for Multicoil Resonant Wireless Power Transfer SystemsKaczmarczyk, Z.| Bodzek, K.| Frania, K.| Ruszczyk, A.2021IEEE Transactions on Power Electronics10.1109/TPEL.2020.3000005
The composition of poly(vinyl chloride) with polylactide/poly(butylene terephthalate-co-butylene sebacate) and its biodegradation by Phanerochaete chrysosporiumNowak, B.| Rusinowski, S.| Korytkowska-Wałach, A.| Chmielnicki, B.2021International Biodeterioration and Biodegradation10.1016/j.ibiod.2020.105153
Control of two-phase heat transfer and condensation loss in turbine blade cascade by injection water dropletsAli Faghih Aliabadi, M.| Zhang, G.| Dykas, S.| Li, H.2021Applied Thermal Engineering10.1016/j.applthermaleng.2020.116541
PrefaceKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering-
Initial Report on Numerical Modeling of Blood Flow in Myocardial Bridge Region of Coronary Artery: Concept of Model ValidationMelka, B.| Nowak, M.| Rojczyk, M.| Gracka, M.| Adamczyk, W.| Ostrowski, Z.| Białecki, R.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_9
Linear copolymers based on choline ionic liquid carrying anti-tuberculosis drugs: Influence of anion type on physicochemical properties and drug releaseNiesyto, K.| Neugebauer, D.2021International Journal of Molecular Sciences10.3390/ijms22010284
In vitro analysis of a physiological strain sensor formulated from a PEDOT:PSS functionalized carbon nanotube-poly(glycerol sebacate urethane) compositeTadayyon, G.| Krukiewicz, K.| Britton, J.| Larrañaga, A.| Vallejo-Giraldo, C.| Fernandez-Yague, M.| Guo, Y.| Orpella-Aceret, G.| Li, L.| Poudel, A.| Biggs, M.J.P.2021Materials Science and Engineering C10.1016/j.msec.2020.111857
Necessary and sufficient conditions for assignability of dichotomy spectra of continuous time-varying linear systemsBabiarz, A.| Cuong, L.V.| Czornik, A.| Doan, T.S.2021Automatica10.1016/j.automatica.2020.109466
Shaping workplace safety in the metallurgical industrySpilka, M.2021Metalurgija-
Assessment of Changing the Radial Forces of Biodegradable Stent in One Month Time IntervalJoszko, K.| Gzik-Zroska, B.| Gzik, M.| Wolański, W.| Iskra, A.| Burkacki, M.| Suchoń, S.| Sobota, R.| Szarek, A.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_6
The impact of wood waste on the properties of silicone-based compositesMrówka, M.| Szymiczek, M.| Skonieczna, M.2021Polymers10.3390/polym13010007
Technology Mapping of Logic Functions in Complex Logic BlocksKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_12
The cost of increasing prosumer self-sufficiencyUchman, W.2021Applied Thermal Engineering10.1016/j.applthermaleng.2020.116361
Environmental performance of dye-sensitized solar cells based on natural dyesBłaszczyk, A.| Joachimiak-Lechman, K.| Sady, S.| Tański, T.| Szindler, M.| Drygała, A.2021Solar Energy10.1016/j.solener.2020.12.040
Influence of isomeric phthaloperinone monomers on the formation of π-dimers and σ-bonded segments in electrochemically-crosslinked productsCzichy, M.| Janasik, P.| Motyka, R.| Zassowski, P.| Grabiec, E.| Wolinska-Grabczyk, A.| Lapkowski, M.2021Electrochimica Acta10.1016/j.electacta.2020.137669
Evaluation of Mechanical Properties of Hernia Surgical Mesh ImplantsLisoń, J.| Basiaga, M.| Paszenda, Z.| Nakonieczny, D.| Walke, W.| Antonowicz, M.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_26
Methods for Representing Boolean Functions—Basic DefinitionsKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_2
Characteristics of the Mg-Zn-Ca-Gd alloy after mechanical alloyingLesz, S.| Hrapkowicz, B.| Karolus, M.| Gołombek, K.2021Materials10.3390/ma14010226
New possibilities of 2-pyranone derivatives – Thermal, optical and electrochemical propertiesKula, S.| Szlapa-Kula, A.| Krompiec, S.| Schab-Balcerzak, E.| Chrobok, A.| Gancarz, P.| Filapek, M.2021Materials Science and Engineering B: Solid-State Materials for Advanced Technology10.1016/j.mseb.2020.114820
Automated Classification of Axial CT Slices Using Convolutional Neural NetworkBadura, P.| Juszczyk, J.| Bożek, P.| Smoliński, M.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_34
Double-panel active noise reducing casing with noise source enclosed inside – Modelling and simulation studyWyrwal, J.| Pawelczyk, M.| Liu, L.| Rao, Z.2021Mechanical Systems and Signal Processing10.1016/j.ymssp.2020.107371
Between Geometry and Technical Drawing - Didactic Interactive and Animated Drawing Teaching Tools of the DIAD-TOOLS ProjectSroka-Bizoń, M.| Dudzik, P.| Sankauskienė, T.| Terczyńska, E.| Tofil, J.| Tytkowski, K.| Vansevicius, A.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-63403-2_66
Impact of Footwear Used in Orthoses on the Kinematics of Locomotor Functions and Energy Expenditure—Case StudyJochymczyk-Woźniak, K.| Nowakowska, K.| Zakałużna-Żerebecka, A.| Michnik, R.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_17
In vitro evaluation of electrochemically bioactivated Ti6Al4V 3D porous scaffoldsMyakinin, A.| Turlybekuly, A.| Pogrebnjak, A.| Mirek, A.| Bechelany, M.| Liubchak, I.| Oleshko, O.| Husak, Y.| Korniienko, V.| Leśniak-Ziółkowska, K.| Dogadkin, D.| Banasiuk, R.| Moskalenko, R.| Pogorielov, M.| Simka, W.2021Materials Science and Engineering C10.1016/j.msec.2021.111870
Dual rolls equal channel extrusion as unconventional SPD process of the ultralow-carbon steel: finite element simulation, experimental investigations and microstructural analysisJabłońska, M.B.| Kowalczyk, K.| Tkocz, M.| Bulzak, T.| Bednarczyk, I.| Rusz, S.2021Archives of Civil and Mechanical Engineering10.1007/s43452-020-00166-3
Optical motion capture dataset of selected techniques in beginner and advanced Kyokushin karate athletesSzczęsna, A.| Błaszczyszyn, M.| Pawlyta, M.2021Scientific Data10.1038/s41597-021-00801-5
ECD spectroelectrochemistry: A reviewKaroń, K.| Łapkowski, M.| Dobrowolski, J.C.2021Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy10.1016/j.saa.2020.119349
Effect of Carbon Layers Deposited by PACVD and RMS Methods on Corrosion Resistance of Ni-Ti AlloyKaczmarek, M.| Kurtyka, P.| Paszenda, Z.| Basiaga, M.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_30
Mag welding process with micro-jet cooling as the effective method for manufacturing joints for s700mc steelWęgrzyn, T.| Szymczak, T.| Szczucka-Lasota, B.| Łazarz, B.2021Metals10.3390/met11020276
Modification of SiOC-based layers with cerium ions - influence on the structure, microstructure and corrosion resistanceGawęda, M.| Jeleń, P.| Bik, M.| Leśniak, M.| Sowa, M.| Simka, W.| Golda-Cepa, M.| Brzychczy-Włoch, M.| Olejniczak, Z.| Nocuń, M.| Sitarz, M.2021Applied Surface Science10.1016/j.apsusc.2020.148871
Thermodynamic and environmental study on synthetic natural gas production in power to gas approaches involving biomass gasification and anaerobic digestionSkorek-Osikowska, A.2021International Journal of Hydrogen Energy10.1016/j.ijhydene.2021.01.002
Electrochemically produced copolymers of pyrrole and its derivatives: A plentitude of material properties using “simple” heterocyclic co-monomersJarosz, T.| Ledwon, P.2021Materials10.3390/ma14020281
Effect of hydrogen addition on the energetic and ecologic parameters of an si engine fueled by biogasPukalskas, S.| Kriaučiūnas, D.| Rimkus, A.| Przybyła, G.| Droździel, P.| Barta, D.2021Applied Sciences (Switzerland)10.3390/app11020742
The oxide scales formed on different co-ni based superalloys during isothermal oxidation at 800 and 900°CMIGAS, D.| KIERAT, M.| MOSKAL, G.2021Archives of Metallurgy and Materials10.24425/amm.2021.134752
Quaternion statistics applied to the classification of motion capture dataŚwitoński, A.| Josiński, H.| Michalczuk, A.| Wojciechowski, K.2021Expert Systems with Applications10.1016/j.eswa.2020.113813
Comparative tribocorrosion tests of 30CrMo12 cast steel and ADI spheroidal cast ironStachowiak, A.| Wieczorek, A.N.2021Tribology International10.1016/j.triboint.2020.106763
Controllability and Stability of Semilinear Fractional Order SystemsKlamka, J.| Babiarz, A.| Czornik, A.| Niezabitowski, M.2021Studies in Systems, Decision and Control10.1007/978-3-030-48587-0_9
The increase in the elastic range and strengthening control of quasi brittle cement composites by low-module dispersed reinforcement: An assessment of reinforcement effectsLogoń, D.| Schabowicz, K.| Roskosz, M.| Fryczowski, K.2021Materials10.3390/ma14020341
Analysis of damage to structures as a result of soil suffusionŚlusarek, J.| Łupieżowiec, M.2021Engineering Failure Analysis10.1016/j.engfailanal.2020.105058
Reconstruction of the Boundary Condition in the Binary Alloy Solidification Problem with the Macrosegregation and the Material Shrinkage Phenomena Taken into AccountZielonka, A.| Hetmaniok, E.| Słota, D.2021Heat Transfer Engineering10.1080/01457632.2019.1699300
3-d tissue image reconstruction from digitized serial histologic sections to visualize small tumor nests in lung adenocarcinomasPyciński, B.| Yagi, Y.| Walts, A.E.| Gertych, A.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_5
Profiling and fingerprinting strategies to assess exposure of edible plants to herbicidesBarchanska, H.| Tang, J.| Fang, X.| Danek, M.| Płonka, J.| Sajdak, M.2021Food Chemistry10.1016/j.foodchem.2020.127658
The application of electrodialysis in synthesis of oligoglycerols from glycerol and epichlorohydrin via Williamson reactionMilewski, A.| Babilas, D.| Czechowicz, D.| Dydo, P.2021Separation and Purification Technology10.1016/j.seppur.2020.117716
Analysis of the Ability to Maintain the Balance of Veterans of Stabilization MissionsWodarski, P.| Jurkojć, J.| Chmura, M.| Bieniek, A.| Guzik-Kopyto, A.| Michnik, R.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_22
Through scale material flow investigation in novel incremental bulk forming processSzyndler, J.| Grosman, F.| Tkocz, M.| Delannay, L.| Wang, J.| Muszka, K.| Madej, L.2021Journal of Materials Processing Technology10.1016/j.jmatprotec.2019.116487
Deep learning approach to subepidermal low echogenic band segmentation in high frequency ultrasoundCzajkowska, J.| Dziurowicz, W.| Badura, P.| Korzekwa, S.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_1
Influence of chemical structure on thermal, optical and electrochemical properties of conjugated azomethinesNitschke, P.| Jarząbek, B.| Vasylieva, M.| Honisz, D.| Małecki, J.G.| Musioł, M.| Janeczek, H.| Chaber, P.2021Synthetic Metals10.1016/j.synthmet.2020.116689
Study of impact of bed joint reinforcement on load-carrying capacity and crack resistance of masonry walls made of calcium silicate unitsŁukasz, D.2021Journal of Building Engineering10.1016/j.jobe.2020.101841
Dynamical diversity of mitochondrial BK channels located in different cell typesWawrzkiewicz-Jałowiecka, A.| Trybek, P.| Machura, Ł.| Bednarczyk, P.2021BioSystems10.1016/j.biosystems.2020.104310
Analysis of the mechanical properties of the titanium layer obtained by the mold cavity preparation methodDULSKA, A.| SZAJNAR, J.| KRÓL, M.2021Archives of Metallurgy and Materials10.24425/amm.2021.134758
Numerical model of the aortic valve implanted within real human aortaNowak, M.| Adamczyk, W.| Melka, B.| Ostrowski, Z.| Bialecki, R.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-49666-1_21
Diagnostics of Rotary Vane Vacuum Pumps Using Signal Processing, Analysis and Clustering MethodsŁój, P.| Cholewa, W.2021Studies in Systems, Decision and Control10.1007/978-3-030-58964-6_8
A sitting or standing position – which one exerts more loads on the musculoskeletal system of the lumbar spine? Comparative tests based on the methods of mathematical modellingZadoń, H.| Nowakowska-Lipiec, K.| Michnik, R.2021Acta of Bioengineering and Biomechanics10.37190/ABB-01762-2020-01
Analysis of Dynamics of the Blast Mitigation SeatKciuk, S.| Bienioszek, G.| Krzystała, E.2021Advances in Intelligent Systems and Computing10.1007/978-3-030-52180-6_13
New forms of the fundamental solutions for 3D magnetoelectroelasticity equationsDziatkiewicz, G.2021Applied Mathematical Modelling10.1016/j.apm.2020.09.052
Examples of simulation of the alloying elements effect on austenite transformations during continuous coolingTRZASKA, J.2021Archives of Metallurgy and Materials10.24425/amm.2021.134791
Efficient technique of impulsive noise detection and replacement in color digital imagesSmolka, B.2021Smart Innovation, Systems and Technologies10.1007/978-981-15-4917-5_14
Bonding effect of liquid magnesium with open-celled carbon foam in interpenetrating phase compositeGodzierz, M.| Olszówka-Myalska, A.| Sobczak, N.| Nowak, R.| Wrześniowski, P.2021Journal of Magnesium and Alloys10.1016/j.jma.2020.06.006
Wound 3D Geometrical Feature Estimation Using Poisson ReconstructionJuszczyk, J.M.| Wijata, A.| Czajkowska, J.| Krecichwost, M.| Rudzki, M.| Biesok, M.| Pycinski, B.| Majewski, J.| Kostecki, J.| Pietka, E.2021IEEE Access10.1109/ACCESS.2020.3035125
IntroductionKubica, M.| Opara, A.| Kania, D.2021Lecture Notes in Electrical Engineering10.1007/978-3-030-60488-2_1
Kinematics of the retractable roofing module constructed from three roof panelsPawlak-Jakubowska, A.| Romaniak, K.2021Journal of Building Engineering10.1016/j.jobe.2021.102169
Structure and corrosion behavior of TiO2 thin films deposited by ALD on a biomedical magnesium alloyKania, A.| Szindler, M.M.| Szindler, M.2021Coatings10.3390/coatings11010070

© Politechnika Śląska

Ogólna klauzula informacyjna o przetwarzaniu danych osobowych przez Politechnikę Śląską

Całkowitą odpowiedzialność za poprawność, aktualność i zgodność z przepisami prawa materiałów publikowanych za pośrednictwem serwisu internetowego Politechniki Śląskiej ponoszą ich autorzy - jednostki organizacyjne, w których materiały informacyjne wytworzono. Prowadzenie: Centrum Informatyczne Politechniki Śląskiej (www@polsl.pl)

Zasady wykorzystywania „ciasteczek” (ang. cookies) w serwisach internetowych Politechniki Śląskiej

Deklaracja dostępności

„E-Politechnika Śląska - utworzenie platformy elektronicznych usług publicznych Politechniki Śląskiej”

Fundusze Europejskie
Fundusze Europejskie
Fundusze Europejskie
Fundusze Europejskie