Scientific and research apparatus
Separators
|
|
|
High-performance wet magnetic separation device. It allows to get six products depending on the material and settings of the device. |
Laboratory magnetic disc separator. It allows the material to be separated into four products. The separation is dry. |
Separator for wet separation of fine-grained materials. |
|
A high-performance device for the separation of fine-grained materials, where there are differences in the ability to accumulate surface charges and electrical conductivity. As a result of separation, up to six products can be obtained. |
|
Electrostatic drum separator. Thanks to construction, it enables quick change of separation parameters, including rotational speed and voltage (up to 30 kV). The design of the device allows easy adjustment of shutters for three or two products.
Spiral separators: Reichert LG-7 and Reichert LD-4
These separators have one spiral-wound trough. The forces acting on the grains of the flowing suspension cause their separation due to their density.
Spiral separator Krebs 2.85
The separator has two spiral-wound troughs. It is possible to add additional water directly into the trough. Reichert and Krebs separators differ in diameter and spiral pitch.
Concentration table
with exchangeable plates
The device is used to separate the particles of suspensions according to their density and friction force.
Cyclofluidal separator
A device for the separation of fine-grained materials in liquids. It allows for obtaining products of very high purity.
Hydrocyclones
Hydrocyclones for enrichment in an aqueous medium; hydrocyclones for classification, thickening and clarification
Flotation machines
Laboratory flotation machines
Mechanobr
Laboratory pneumatic-mechanical flotation machines with a cell capacity of 1 dm3.
Laboratory flotation machines
WEMCO
Subaerative flotation machines
- Humboldt type.
Screeners
Semi-technical screen
Laboratory screen
Fritsch
The screen is equipped with screens with a diameter of 50 cm with various mesh sizes.
The device is used to perform dry or wet grain size analysis of the material. The set includes laboratory sieves with mesh from 0.063 mm to 5 mm and with a cover placed on a vibrating base.
Laboratory furnaces and dryers
Laboratory muffle furnaces
Devices for heating samples at high temperatures - up to 1100 °C.
These furnaces are equipped with
a microprocessor temperature controller with programmable heating cycles.
Laboratory dryers
Devices enabling long-term heating of samples at temperatures up to 300 °C.
Analytical and other devices
UV-Vis Spectrophotometer DR5000 HACHLANGE
It is used to measure the concentrations of organic and inorganic substances.
Magnum mineralizer - microwave digestion
The device is used to digest samples at high temperature and pressure.
Rotary shaker ROTAX 6.8
The device is used, among others for carrying out leaching tests.
Programmable rotator Multi Bio RS-24
The rotator is equipped with PRS-10 and PRS-12 platforms. Enables three types of movement (rotating, reversible and vibrating) with various combinations.
Knick PORTAMESS meters to measure pH, conductivity, ORP, dissolved oxygen and temperature
The Knick PORTAMESS 913 Series are a portable device for pH, ORP, conductivity and O2 measure.
Zeta meter: Laser Zee PenKem Model 501 zeta-meter to measure
The device is used to measure the zeta potential ζ (electrokinetic potential).
Optical Goniometer
Kernco
It is used to measure the contact angle.
Ferromagnetic content analyzer
SATMAGAN
Device for testing the content of ferromagnetic substances in solid samples.
Teslometer
TENMARS TM-197
Device for measuring magnetic field induction, for the identification of the poles of permanent magnets, for the evaluation of residual magnetization and the measurement of the residual magnetism in ferromagnetic solids after demagnetization.
Analytical balances
Laboratory balances with various ranges and accuracies (up to 0.0001 g).
Pycnometers and measuring cylinders and other laboratory glassware
Pycnometers and measuring cylinders are designed to determine the specific and volumetric density of solids.
Sulphur analyzer
LECO SC132
Device for measuring total sulfur content in solid samples.
Vacuum filtration kit
The vacuum filtration kit consists of funnel and Büchner flask. Applying a vacuum significantly reduces the filtration time.
Magnetic stirrer
The magnetic stirrer is equipped with a chemically resistant heating plate and a stand. It enables smooth change of rotation speed and temperature.
X’Pert PRO MPD diffractometer
PANalytical B.V.
X-ray qualitative and quantitative phase analysis of solids materials (Including powders) and liquids. Crystallographic texture analysis. Residual stress analysis. Grazing incidence diffraction (GID) for thin layers analysis. Diffraction at elevated temperatures (high temperature chamber).
The device is in Materials Research Laboratory.
Glow Discharge Atomic Emission Spectrometer
GDS850 and GDS500 LECO
Spectrometer LECO GDS850A enables determination of 58 elements contents simultaneously mainly in ferrous and non-ferrous metals. With an additional RF option, the GDS is capable of quantifying non-conductive thin oxide layers, at nanometer resolution, on materials such as stainless steel.
The GDS500A features improved performance, stability, linearity, accuracy, and precision in steel, iron (including as-cast), aluminium, copper, zinc, nickel, cobalt, tungsten, and titanium.
The devices are in Materials Research Laboratory.
Light stereoscopic microscope
SteREO Discovery Zeiss
Microscope is equipped with an observation system using two independent optical paths allowing observation of spatial objects, thanks to its high depth of field. CCD camera with high resolution 12Mpix. Acquisition and image analysis system Axio Vision.
The device is in Materials Research Laboratory.
High resolution scanning electron microscope
SUPRA 35 Carl Zeiss AG
High resolution scanning electron microscope is designed to be used for surface analyses of all groups of engineering material, both conducting and non-conducting electric charges. Analytical equipment allows to determinate materials chemical composition in micro areas and allow to perform diffraction analyses. Large microscope chamber can be used for studies of standard size samples as well as small complete industrial object and products. High resolution observation ability allows to carry out wide range of nanotechnology projects.
The device is in Materials Research Laboratory.
High resolution scanning electron microscope
EVO MA10 Carl Zeiss AG
The device is in Materials Research Laboratory.
High resolution transmission electron microscope
S/TEM TITAN 80-300 FEI
High resolution transmission electron microscope S/TEM TITAN 80-300 (FEI Company ) with a unique brightness field-emission gun (X-FEG), bright field, dark field, and high angle annular dark field (HAADF) STEM imaging, a probe Cs corrector for atomic resolution scanning transmission imaging (STEM), EDX, 3D tomography. Year of manufacture 2010.
The device is in Materials Research Laboratory.
Crushers and mills
Laboratory knife mill
TestChem
Mill for grinding Waste from Electrical and Electronic Equipment (WEEE), plastics, cables and other waste.
Disintegrator- shredder
A device for shredding waste, mainly used electronic equipment.
Laboratory disc mill
TestChem
The grinding element of this device is a bowl with a disc of considerable mass, the movement of which causes a quick reduction of the size of the material particles. The mill can be used for materials of high hardness.
Laboratory vibratory mill with flexibly suspended chambers
The four-pot vibrating mill with flexibly suspended chambers enables the simultaneous grinding of four material samples. Grinding takes place in steel pots in which steel bars of various diameters are placed.
Laboratory mortar
The device is used for grinding particles of organic and inorganic materials. Wet or dry grinding.
Laboratory impact mill with sieve
The laboratory stroke mill equipped with screens with different perforations.
Ball mill with diameter of 50 cm
The rotation of the loaded drum reduces the particle size by impact of the milling balls.
Laboratory hammer crusher with sieve
This type of device is used for crushing loose materials of medium hardness.
Laboratory jaw crusher
The jaw crushers are used for the primary crushing of loose materials of low hardness. The construction of the device enables changing the gap between the jaws.
Laboratory jaw-roll crusher
Jaw crusher retrofitted with an eccentric roll.
Laboratory disc crusher
Laboratory disc crusher with an adjustable disc gap.
Laboratory disintegrator with sieve
The disintegrator is equipped with screens with different perforation sizes. The device allows the feed placing to two places: to the center of the rotator and from its side.
Laboratory roll-impact mill
BUMAT
The roll-impact mill consists of two rotating Teflon bowls in which milling media are placed. The device allows the use of chemical reagents during grinding.
