A A+ A++
Publikacje

POB3 Scientific Publications

2020

TitleAuthorsYearJournalDOI
A novel transfer learning based approach for pneumonia detection in chest X-ray imagesChouhan, V.| Singh, S.K.| Khamparia, A.| Gupta, D.| Tiwari, P.| Moreira, C.| Damaševičius, R.| de Albuquerque, V.H.C.2020Applied Sciences (Switzerland)10.3390/app10020559
Structural and evolutionary analysis indicate that the sars-COV-2 mpro is a challenging target for small-molecule inhibitor designBzówka, M.| Mitusińska, K.| Raczyńska, A.| Samol, A.| Tuszyński, J.A.| Góra, A.2020International Journal of Molecular Sciences10.3390/ijms21093099
Methods and Means of Web Content Personalization for Commercial Information Products DistributionDemchuk, A.| Lytvyn, V.| Vysotska, V.| Dilai, M.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-26474-1_24
Automated Monitoring of Changes in Web ResourcesVysotska, V.| Burov, Y.| Lytvyn, V.| Oleshek, O.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-26474-1_25
The intellectual system development of distant competencies analyzing for IT recruitmentRzheuskyi, A.| Kutyuk, O.| Voloshyn, O.| Kowalska-Styczen, A.| Voloshyn, V.| Chyrun, L.| Chyrun, S.| Peleshko, D.| Rak, T.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-33695-0_47
Thermally Activated Delayed Fluorescent Donor-Acceptor-Donor-Acceptor π-Conjugated Macrocycle for Organic Light-Emitting DiodesIzumi, S.| Higginbotham, H.F.| Nyga, A.| Stachelek, P.| Tohnai, N.| Silva, P.D.| Data, P.| Takeda, Y.| Minakata, S.2020Journal of the American Chemical Society10.1021/jacs.9b11578
Alkali metals association in biomass and their impact on ash melting behaviourMlonka-Mędrala, A.| Magdziarz, A.| Gajek, M.| Nowińska, K.| Nowak, W.2020Fuel10.1016/j.fuel.2019.116421
Kinetic modelling of waste wood devolatilization during pyrolysis based on thermogravimetric data and solar pyrolysis reactor performanceSobek, S.| Werle, S.2020Fuel10.1016/j.fuel.2019.116459
System Development for Video Stream Data AnalyzingLytvyn, V.| Vysotska, V.| Mykhailyshyn, V.| Rzheuskyi, A.| Semianchuk, S.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-26474-1_23
A hybrid energy storage system using compressed air and hydrogen as the energy carrierBartela2020Energy10.1016/j.energy.2020.117088
Small Lung Nodules Detection Based on Fuzzy-Logic and Probabilistic Neural Network with Bioinspired Reinforcement LearningCapizzi, G.| Sciuto, G.L.| Napoli, C.| Polap, D.| Wozniak, M.2020IEEE Transactions on Fuzzy Systems10.1109/TFUZZ.2019.2952831
Comparison between heterogeneous and homogeneous solar driven advanced oxidation processes for urban wastewater treatment: Pharmaceuticals removal and toxicityManiakova, G.| Kowalska, K.| Murgolo, S.| Mascolo, G.| Libralato, G.| Lofrano, G.| Sacco, O.| Guida, M.| Rizzo, L.2020Separation and Purification Technology10.1016/j.seppur.2019.116249
Removal of carbamazepine, diclofenac and trimethoprim by solar driven advanced oxidation processes in a compound triangular collector based reactor: A comparison between homogeneous and heterogeneous processesKowalska, K.| Maniakova, G.| Carotenuto, M.| Sacco, O.| Vaiano, V.| Lofrano, G.| Rizzo, L.2020Chemosphere10.1016/j.chemosphere.2019.124665
The abrasive wear resistance of coatings manufactured on high-strength low-alloy (HSLA) offshore steel in wetwelding conditionsTomków, J.| Czupryński, A.| Fydrych, D.2020Coatings10.3390/coatings10030219
Aviation aircraft planning system project developmentLytvyn, V.| Kowalska-Styczen, A.| Peleshko, D.| Rak, T.| Voloshyn, V.| Noennig, J.R.| Vysotska, V.| Nykolyshyn, L.| Pryshchepa, H.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-33695-0_23
Visible Light Anthraquinone Functional Phthalocyanine Photoinitiator for Free-Radical and Cationic PolymerizationsBreloy, L.| Brezová, V.| Blacha-Grzechnik, A.| Presset, M.| Yildirim, M.S.| Yilmaz, I.| Yagci, Y.| Versace, D.-L.2020Macromolecules10.1021/acs.macromol.9b01630
Soft trees with neural components as image-processing technique for archeological excavationsWoźniak, M.| Połap, D.2020Personal and Ubiquitous Computing10.1007/s00779-019-01292-3
Fabrication and application of electrically conducting composites for electromagnetic interference shielding of remotely piloted aircraft systemsTurczyn, R.| Krukiewicz, K.| Katunin, A.| Sroka, J.| Sul, P.2020Composite Structures10.1016/j.compstruct.2019.111498
Analyzing similarities between the european union countries in terms of the structure and volume of energy production from renewable energy sourcesBrodny, J.| Tutak, M.2020Energies10.3390/en13040913
Intelligent Home Systems for Ubiquitous User Support by Using Neural Networks and Rule-Based ApproachWoźniak, M.| Połap, D.2020IEEE Transactions on Industrial Informatics10.1109/TII.2019.2951089
Recent developments in electrospun ZnO nanofibers: A short reviewBlachowicz, T.| Ehrmann, A.2020Journal of Engineered Fibers and Fabrics10.1177/1558925019899682
Banning carbon nanotubes would be scientifically unjustified and damaging to innovationHeller, D.A.| Jena, P.V.| Pasquali, M.| Kostarelos, K.| Delogu, L.G.| Meidl, R.E.| Rotkin, S.V.| Scheinberg, D.A.| Schwartz, R.E.| Terrones, M.| Wang, Y.H.| Bianco, A.| Boghossian, A.A.| Cambré, S.| Cognet, L.| Corrie, S.R.| Demokritou, P.| Giordani, S.| Hertel, T.| Ignatova, T.| Islam, M.F.| Iverson, N.M.| Jagota, A.| Janas, D.| Kono, J.| Kruss, S.| Landry, M.P.| Li, Y.| Martel, R.| Maruyama, S.| Naumov, A.V.| Prato, M.| Quinn, S.J.| Roxbury, D.| Strano, M.S.| Tour, J.M.| Weisman, R.B.| Wenseleers, W.| Yudasaka, M.2020Nature Nanotechnology10.1038/s41565-020-0656-y
A smart home system developmentLytvyn, V.| Vysotska, V.| Shakhovska, N.| Mykhailyshyn, V.| Medykovskyy, M.| Peleshchak, I.| Fernandes, V.B.| Peleshchak, R.| Shcherbak, S.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-33695-0_54
Optimization of the primary nozzle based on a modified condensation model in a steam ejectorZhang, G.| Dykas, S.| Yang, S.| Zhang, X.| Li, H.| Wang, J.2020Applied Thermal Engineering10.1016/j.applthermaleng.2020.115090
Rheology of ionanofluids – A reviewJóźwiak, B.| Boncel, S.2020Journal of Molecular Liquids10.1016/j.molliq.2020.112568
Solvent-Free Aerobic Oxidation of Ethylbenzene Promoted by NHPI/Co(II) Catalytic System: The Key Role of Ionic LiquidsDobras, G.| Sitko, M.| Petroselli, M.| Caruso, M.| Cametti, M.| Punta, C.| Orlińska, B.2020ChemCatChem10.1002/cctc.201901737
Adhesion of three-dimensional printing on textile fabrics: Inspiration from and for other research areasKozior, T.| Blachowicz, T.| Ehrmann, A.2020Journal of Engineered Fibers and Fabrics10.1177/1558925020910875
Experimental and numerical investigation of striker shape influence on the destruction image in multilayered composite after low velocity impactSławski, S.| Szymiczek, M.| Kaczmarczyk, J.| Domin, J.| Duda, S.2020Applied Sciences (Switzerland)10.3390/app10010288
Computational techniques in numerical simulations of arc and laser welding processesKik, T.2020Materials10.3390/ma13030608
Conductive electrospun nanofiber matsBlachowicz, T.| Ehrmann, A.2020Materials10.3390/ma13010152
Training- And Test-Time Data Augmentation for Hyperspectral Image SegmentationNalepa, J.| Myller, M.| Kawulok, M.2020IEEE Geoscience and Remote Sensing Letters10.1109/LGRS.2019.2921011
Heat source models in numerical simulations of laser weldingKik, T.2020Materials10.3390/ma13112653
Adapting the powered roof support to diverse mining and geological conditionsSzurgacz, D.| Brodny, J.2020Energies10.3390/en13020405
Predictive maintenance of boiler feed water pumps using SCADA dataMoleda, M.| Momot, A.| Mrozek, D.2020Sensors (Switzerland)10.3390/s20020571
Neural network powered COVID-19 spread forecasting modelWieczorek, M.| Siłka, J.| Woźniak, M.2020Chaos, Solitons and Fractals10.1016/j.chaos.2020.110203
Synthesis of Ag nanoparticles by a chitosan-poly(3-hydroxybutyrate) polymer conjugate and their superb catalytic activitySilvestri, D.| Wacławek, S.| Venkateshaiah, A.| Krawczyk, K.| Sobel, B.| Padil, V.V.T.| Černík, M.| Varma, R.S.2020Carbohydrate Polymers10.1016/j.carbpol.2019.115806
Properties of concrete with recycled concrete aggregate containing metallurgical sludge wastePizoń, J.| Gołaszewski, J.| Alwaeli, M.| Szwan, P.2020Materials10.3390/ma13061448
Magnetic properties of electrospun magnetic nanofiber mats after stabilization and carbonizationFokin, N.| Grothe, T.| Mamun, A.| Trabelsi, M.| Klöcker, M.| Sabantina, L.| Döpke, C.| Blachowicz, T.| Hütten, A.| Ehrmann, A.2020Materials10.3390/ma13071552
The use of a park and ride system a case study based on the City of Cracow (Poland)Macioszek, E.| Kurek, A.2020Energies10.3390/en13133473
Impact damage evaluation in composite structures based on fusion of results of ultrasonic testing and x-ray computed tomographyKatunin, A.| Wronkowicz-Katunin, A.| Dragan, K.2020Sensors (Switzerland)10.3390/s20071867
Influence of scanning strategy parameters on residual stress in the SLM process according to the bridge curvature method for AISI 316L stainless steelHajnys, J.| Pagáč, M.| Měsíček, J.| Petru, J.| Król, M.2020Materials10.3390/ma13071659
Application of LCA method for assessment of environmental impacts of a polylactide (PLA) bottle shapingBałdowska-Witos, P.| Kruszelnicka, W.| Kasner, R.| Tomporowski, A.| Flizikowski, J.| Kłos, Z.| Piotrowska, K.| Markowska, K.2020Polymers10.3390/polym12020388
Economic aspects of driving various types of vehicles in intelligent urban transport systems, including car-sharing services and autonomous vehiclesTuroń, K.| Kubik, A.2020Applied Sciences (Switzerland)10.3390/app10165580
Quinizarin Derivatives as Photoinitiators for Free-Radical and Cationic Photopolymerizations in the Visible Spectral RangeSautrot-Ba, P.| Jockusch, S.| Malval, J.-P.| Brezová, V.| Rivard, M.| Abbad-Andaloussi, S.| Blacha-Grzechnik, A.| Versace, D.-L.2020Macromolecules10.1021/acs.macromol.9b02448
Hyperspectral Band Selection Using Attention-Based Convolutional Neural NetworksRibalta Lorenzo, P.| Tulczyjew, L.| Marcinkiewicz, M.| Nalepa, J.2020IEEE Access10.1109/ACCESS.2020.2977454
Microstructural characterization of laser-cladded NiCrAlY coatings on Inconel 625 Ni-based superalloy and 316L stainless steelMoskal, G.| Niemiec, D.| Chmiela, B.| Kałamarz, P.| Durejko, T.| Ziętala, M.| Czujko, T.2020Surface and Coatings Technology10.1016/j.surfcoat.2019.125317
Main functions of operation managementWolniak, R.2020Production Engineering Archives10.30657/pea.2020.26.03
Electrochemical modification of the Ti-15Mo alloy surface in solutions containing ZnO and Zn3(PO4)2 particlesLeśniak-Ziółkowska, K.| Kazek-Kęsik, A.| Rokosz, K.| Raaen, S.| Stolarczyk, A.| Krok-Borkowicz, M.| Pamuła, E.| Gołda-Cępa, M.| Brzychczy-Włoch, M.| Simka, W.2020Materials Science and Engineering C10.1016/j.msec.2020.111098
Detection of atrial fibrillation episodes in long‐term heart rhythm signals using a support vector machineCzabanski, R.| Horoba, K.| Wrobel, J.| Matonia, A.| Martinek, R.| Kupka, T.| Jezewski, M.| Kahankova, R.| Jezewski, J.| Leski, J.M.2020Sensors (Switzerland)10.3390/s20030765
Most recent developments in electrospun magnetic nanofibers: A reviewBlachowicz, T.| Ehrmann, A.2020Journal of Engineered Fibers and Fabrics10.1177/1558925019900843
Safety risk assessment of a Pb-Zn mine based on fuzzy-grey correlation analysisDong, G.| Wei, W.| Xia, X.| Woźniak, M.| Damaševičius, R.2020Electronics (Switzerland)10.3390/electronics9010130
Thermodynamic, economic and environmental assessment of renewable natural gas production systemsSkorek-Osikowska, A.| Martín-Gamboa, M.| Dufour, J.2020Energy Conversion and Management: X10.1016/j.ecmx.2020.100046
3D printed MEMS technology-recent developments and applicationsBlachowicz, T.| Ehrmann, A.2020Micromachines10.3390/MI11040434
Influence of solidification conditions on the microstructure of laser-surface-melted ductile cast ironJanicki, D.| Górka, J.| Kwaśny, W.| Pakiela, W.| Matus, K.2020Materials10.3390/ma13051174
Secure ear biometrics using circular kernel principal component analysis, Chebyshev transform hashing and Bose–Chaudhuri–Hocquenghem error-correcting codesOlanrewaju, L.| Oyebiyi, O.| Misra, S.| Maskeliunas, R.| Damasevicius, R.2020Signal, Image and Video Processing10.1007/s11760-019-01609-y
Fall detection in older adults with mobile IoT devices and machine learning in the cloud and on the edgeMrozek, D.| Koczur, A.| Małysiak-Mrozek, B.2020Information Sciences10.1016/j.ins.2020.05.070
Novel urethane-dimethacrylate monomers and compositions for use as matrices in dental restorative materialsBarszczewska-Rybarek, I.M.| Chrószcz, M.W.| Chladek, G.2020International Journal of Molecular Sciences10.3390/ijms21072644
Hybrid laser deposition of fe-based metallic powder under cryogenic conditionsLisiecki, A.| Ślizak, D.2020Metals10.3390/met10020190
Structural aspects of decreasing the corrosion resistance of zinc coating obtained in baths with Al, Ni, and Pb additivesKania, H.| Saternus, M.| Kudlácek, J.2020Materials10.3390/ma13020385
Mathematical modeling of breast tumor destruction using fast heating during radiofrequency ablationParuch, M.2020Materials10.3390/ma13010136
Practical application of the industry 4.0 concept in a steel companyMiśkiewicz, R.| Wolniak, R.2020Applied Sciences (Switzerland)10.3390/su12145776
Accurate condensing steam flow modeling in the ejector of the solar-driven refrigeration systemZhang, G.| Dykas, S.| Li, P.| Li, H.| Wang, J.2020Energy10.1016/j.energy.2020.118690
Automotive Paint Shop 4.0Bysko, S.| Krystek, J.| Bysko, S.2020Computers and Industrial Engineering10.1016/j.cie.2018.11.056
Orientation of electrospun magnetic nanofibers near conductive areasStorck, J.L.| Grothe, T.| Mamun, A.| Sabantina, L.| Klöcker, M.| Blachowicz, T.| Ehrmann, A.2020Materials10.3390/ma13010047
Comparison of material properties of scc concrete with steel fibres related to ingress of chloridesLehner, P.| Konečný, P.| Ponikiewski, T.2020Crystals10.3390/cryst10030220
Indoor air quality in residential buildings in Upper Silesia, PolandKozielska, B.| Mainka, A.| Żak, M.| Kaleta, D.| Mucha, W.2020Building and Environment10.1016/j.buildenv.2020.106914
Can a Mononuclear Iron(III)-Superoxo Active Site Catalyze the Decarboxylation of Dodecanoic Acid in UndA to Produce Biofuels?Lin, Y.-T.| Stańczak, A.| Manchev, Y.| Straganz, G.D.| de Visser, S.P.2020Chemistry - A European Journal10.1002/chem.201903783
Toward Efficient Toxic-Gas Detectors: Exploring Molecular Interactions of Sarin and Dimethyl Methylphosphonate with Metal-Centered Phthalocyanine StructuresAldahhak, H.| Powroźnik, P.| Pander, P.| Jakubik, W.| Dias, F.B.| Schmidt, W.G.| Gerstmann, U.| Krzywiecki, M.2020Journal of Physical Chemistry C10.1021/acs.jpcc.9b11116
Life cycle impact assessment of electric vehicle battery charging in European Union countriesBurchart-Korol, D.| Jursova, S.| Folęga, P.| Pustejovska, P.2020Journal of Cleaner Production10.1016/j.jclepro.2020.120476
Comparative study of sound transmission losses of sandwich composite double panel wallsIsaac, C.W.| Pawelczyk, M.| Wrona, S.2020Applied Sciences (Switzerland)10.3390/app10041543
Structure-property relationships of tailored imidazolium- and pyrrolidinium-based poly(ionic liquid)s. Solid-like vs. gel-like systemsMaksym, P.| Tarnacka, M.| Bielas, R.| Hachuła, B.| Zajac, A.| Szpecht, A.| Smiglak, M.| Kaminski, K.| Paluch, M.2020Polymer10.1016/j.polymer.2020.122262
CO2 reduction methods and evaluation of proposed energy efficiency improvements in Poland's large industrial plantBroniszewski, M.| Werle, S.2020Energy10.1016/j.energy.2020.117704
Non-equilibrium approach for the simulation of CO2 expansion in two-phase ejector driven by subcritical motive pressureBodys, J.| Smolka, J.| Palacz, M.| Haida, M.| Banasiak, K.2020International Journal of Refrigeration10.1016/j.ijrefrig.2020.02.015
Thermodynamic, economic and environmental assessment of energy systems including the use of gas from manure fermentation in the context of the Spanish potentialSkorek-Osikowska, A.| Martín-Gamboa, M.| Iribarren, D.| García-Gusano, D.| Dufour, J.2020Energy10.1016/j.energy.2020.117452
Complex corrosion properties of aisi 316L steel prepared by 3D printing technology for possible implant applicationsHlinka, J.| Kraus, M.| Hajnys, J.| Pagac, M.| Petru, J.| Brytan, Z.| Tanski, T.2020Materials10.3390/ma13071527
Effect of KOBO Extrusion and Following Cyclic Forging on Grain Refinement of Mg–9Li–2Al–0.5Sc AlloyDutkiewicz, J.| Kalita, D.| Maziarz, W.| Tański, T.| Borek, W.| Ostachowski, P.| Faryna, M.2020Metals and Materials International10.1007/s12540-019-00350-y
Blockchain technology and neural networks for the internet of medical thingsPolap, D.| Srivastava, G.| Jolfaei, A.| Parizi, R.M.2020IEEE INFOCOM 2020 - IEEE Conference on Computer Communications Workshops, INFOCOM WKSHPS 202010.1109/INFOCOMWKSHPS50562.2020.9162735
Microstructure and selected properties of cr3c2–nicr coatings obtained by hvof on magnesium alloy substratesJonda, E.| Łatka, L.| Pakieła, W.2020Materials10.3390/ma13122775
Dilatometric study of phase transformations in 5 Mn steel subjected to different heat treatmentsMorawiec, M.| Grajcar, A.| Zalecki, W.| Garcia-Mateo, C.| Opiela, M.2020Materials10.3390/ma13040958
4-n-butylresorcinol-based linear and graft polymethacrylates for arbutin and vitamins delivery by micellar systemsOdrobińska, J.| Mielańczyk, L.| Neugebauer, D.2020Polymers10.3390/polym12020330
Co2 hydrogenation to methanol over ce and zr containing uio-66 and cu/uio-66Stawowy, M.| Ciesielski, R.| Maniecki, T.| Matus, K.| Łużny, R.| Trawczynski, J.| Silvestre-Albero, J.| Łamacz, A.2020Catalysts10.3390/catal10010039
Calculation methods of steam boiler operation factors under varying operating conditions with the use of computational thermodynamic modelingMadejski, P.| Żymełka, P.2020Energy10.1016/j.energy.2020.117221
Oxidation of cycloalkanes catalysed by N-hydroxyimides in supercritical carbon dioxideLisicki, D.| Orlińska, B.2020Chemical Papers10.1007/s11696-019-00937-0
Efficiency analysis of manufacturing line with industrial robots and human operatorsBarosz, P.| Gołda, G.| Kampa, A.2020Applied Sciences (Switzerland)10.3390/APP10082862
Robust poly(vinyl alcohol) membranes containing chitosan/chitosan derivatives microparticles for pervaporative dehydration of ethanolDudek, G.| Turczyn, R.| Konieczny, K.2020Separation and Purification Technology10.1016/j.seppur.2019.116094
A mini-review on chitosan-based hydrogels with potential for sustainable agricultural applicationsMichalik, R.| Wandzik, I.2020Polymers10.3390/polym12102425
Prediction of Meander Delay System Parameters for Internet-of-Things Devices Using Pareto-Optimal Artificial Neural Network and Multiple Linear RegressionPlonis, D.| Katkevicius, A.| Gurskas, A.| Urbanavicius, V.| Maskeliunas, R.| Damasevicius, R.2020IEEE Access10.1109/ACCESS.2020.2974184
Cognitive Technologies in the Management and Formation of Directions of the Priority Development of Industrial EnterprisesKwilinski, A.| Kuzior, A.2020Management Systems in Production Engineering10.2478/mspe-2020-0020
The Erasmus+ Strategic Partnership as a Way to Attract Young People to EngineeringStępień, M.| Berger, K.| Rassõlkin, A.| Vaimann, T.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-20135-7_25
The effect of service on microstructure and mechanical properties of HR3C heat-resistant austenitic stainless steelGolański, G.| Zieliński, A.| Sroka, M.| Slania, J.2020Materials10.3390/ma13061297
3D object reconstruction from imperfect depth data using extended yolov3 networkKulikajevas, A.| Maskeliūnas, R.| Damaševičius, R.| Ho, E.S.L.2020Sensors (Switzerland)10.3390/s20072025
Performance operation of liquid ejectors for a R744 integrated multi-ejector supermarket system using a hybrid ROMHaida, M.| Smolka, J.| Hafner, A.| Palacz, M.| Ostrowski, Z.| Bodys, J.| Kriezi, E.K.| Försterling, S.| Nowak, A.J.| Banasiak, K.2020International Journal of Refrigeration10.1016/j.ijrefrig.2019.10.020
Insights into the properties and potential applications of renewable carbohydrate-based ionic liquids: A reviewGaida, B.| Brzȩczek-Szafran, A.2020Molecules10.3390/molecules25143285
Removal of boron and manganese ions from wet-flue gas desulfurizationwastewater by hybrid chitosan-zirconium sorbentKluczka, J.2020Polymers10.3390/polym12030635
Electrochemical Polymerization of Pyrrole-Perimidine Hybrids: Low-Band-Gap Materials with High n-Doping ActivityCzichy, M.| Zhylitskaya, H.| Zassowski, P.| Navakouski, M.| Chulkin, P.| Janasik, P.| Lapkowski, M.| Stȩpień, M.2020Journal of Physical Chemistry C10.1021/acs.jpcc.0c03002
Applications of water molecules for analysis of macromolecule propertiesMitusińska, K.| Raczyńska, A.| Bzówka, M.| Bagrowska, W.| Góra, A.2020Computational and Structural Biotechnology Journal10.1016/j.csbj.2020.02.001
Influence of plastic strain accumulation in continuous ingots during ECAP on structure and recrystallization temperature of AlCu4MgSi alloyNuckowski, P.M.| Snopiński, P.| Wróbel, T.2020Materials10.3390/ma13030576
The influence of selected melting parameters on the physical and chemical properties of cast ironPetrus, Ł.| Bulanowski, A.| Kołakowski, J.| Brzezański, M.| Urbanowicz, M.| Sobieraj, J.| Matuszkiewicz, G.| Szwalbe, L.| Janerka, K.2020Archives of Foundry Engineering10.24425/afe.2020.131290
Identification of energy efficiency trends in the context of the development of industry 4.0 using the polish steel sector as an exampleWolniak, R.| Saniuk, S.| Grabowska, S.| Gajdzik, B.2020Energies10.3390/en13112867
Assessment of the effect of laser welding on the properties and structure of TMCP steel butt jointsGórka, J.2020Materials10.3390/ma13061312
Influence of crimped steel fibre on properties of concrete based on an aggregate mix of waste and natural aggregatesKatzer, J.| Kobaka, J.| Ponikiewski, T.2020Materials10.3390/MA13081906
Efficient generation of singlet oxygen by perylene diimide photosensitizers covalently bound to conjugate polymersBlacha-Grzechnik, A.| Drewniak, A.| Walczak, K.Z.| Szindler, M.| Ledwon, P.2020Journal of Photochemistry and Photobiology A: Chemistry10.1016/j.jphotochem.2019.112161
Laser surface modification of aluminium alloy AlMg9 with B4C powderSroka, M.| Jonda, E.| Pakieła, W.2020Materials10.3390/ma13020402
An efficient segmentation and classification system in medical images using intuitionist possibilistic fuzzy C-mean clustering and fuzzy SVM algorithmChowdhary, C.L.| Mittal, M.| Kumaresan, P.| Pattanaik, P.A.| Marszalek, Z.2020Sensors (Switzerland)10.3390/s20143903
Formation of a bacteriostatic surface on zrnb alloy via anodization in a solution containing cu nanoparticlesKorniienko, V.| Oleshko, O.| Husak, Y.| Deineka, V.| Holubnycha, V.| Mishchenko, O.| Kazek-Kęsik, A.| Jakóbik-Kolon, A.| Pshenychnyi, R.| Leśniak-Ziółkowska, K.| Kalinkevich, O.| Kalinkevich, A.| Pisarek, M.| Simka, W.| Pogorielov, M.2020Materials10.3390/ma13183913
Experimental and numerical study on heat transfer intensification in turbulent flow of CuO–water nanofluids in horizontal coilKorpyś, M.| Dzido, G.| Al-Rashed, M.H.| Wójcik, J.2020Chemical Engineering and Processing - Process Intensification10.1016/j.cep.2020.107983
A Hopping Umbrella for Fuzzy Joining Data Streams from IoT Devices in the Cloud and on the EdgeMrozek, D.| Tokarz, K.| Pankowski, D.| Malysiak-Mrozek, B.2020IEEE Transactions on Fuzzy Systems10.1109/TFUZZ.2019.2955056
Lessening stress and anxiety-related behaviors by means of AI-driven drones for aromatherapyCapizzi, G.| Napoli, C.| Russo, S.| Woźniak, M.2020CEUR Workshop Proceedings-
Micromagnetic simulation of vortex development in magnetic bi-material bow-tie structuresSudsom, D.| Junger, I.J.| Döpke, C.| Blachowicz, T.| Hahn, L.| Ehrmann, A.2020Condensed Matter10.3390/condmat5010005
Perfectly imperfect: A review of chemical tools for exciton engineering in single-walled carbon nanotubesJanas, D.2020Materials Horizons10.1039/d0mh00845a
An experimental data-driven model of a micro-cogeneration installation for time-domain simulation and system analysisUchman, W.| Kotowicz, J.| Remiorz, L.2020Energies10.3390/en13112759
Advanced treatment of real grey water by SBR followed by ultrafiltration-performance and fouling behaviorKamińska, G.| Marszałek, A.2020Water (Switzerland)10.3390/w12010154
Monolithic microreactors of different structure as an effective tool for in flow MPV reactionMaresz, K.| Ciemięga, A.| Mrowiec-Białoń, J.2020Chemical Engineering Journal10.1016/j.cej.2019.122281
Decision making support for local authorities choosing the method for siting of in-city ev charging stationsSierpiński, G.| Staniek, M.| Kłos, M.J.2020Energies10.3390/en13184682
Recent developments of solar cells from PbS colloidal quantum dotsBlachowicz, T.| Ehrmann, A.2020Applied Sciences (Switzerland)10.3390/app10051743
Experimental validation of optimised straight-through labyrinth seals with various land structuresSzymański, A.| Wróblewski, W.| Bochon, K.| Majkut, M.| Strozik, M.| Marugi, K.2020International Journal of Heat and Mass Transfer10.1016/j.ijheatmasstransfer.2020.119930
Properties of concrete made with low-emission cements CEM II/C-M and CEM VIKról, A.| Giergiczny, Z.| Kuterasinska-Warwas, J.2020Materials10.3390/ma13102257
A journey in the complex interactions between electrochemistry and bacteriology: From electroactivity to electromodulation of bacterial biofilmsCzerwińska-Główka, D.| Krukiewicz, K.2020Bioelectrochemistry10.1016/j.bioelechem.2019.107401
Numerical investigation of dual thermoacoustic engineRogoziński, K.| Nowak, G.2020Energy Conversion and Management10.1016/j.enconman.2019.112231
A reliable numerical model for assessing the thermal behavior of a dome buildingPokorska-Silva, I.| Kadela, M.| Fedorowicz, L.2020Journal of Building Engineering10.1016/j.jobe.2020.101706
Strengthening the perception of the virtual worlds in a virtual reality environmentPołap, D.| Kęsik, K.| Winnicka, A.| Woźniak, M.2020ISA Transactions10.1016/j.isatra.2020.02.023
The analysis of dynamic operation of power-to-SNG system with hydrogen generator powered with renewable energy, hydrogen storage and methanation unitUchman, W.| Skorek-Osikowska, A.| Jurczyk, M.| Węcel, D.2020Energy10.1016/j.energy.2020.118802
A simple route for manufacture of photovoltaic devices based on chalcohalide nanowiresMistewicz, K.| Matysiak, W.| Jesionek, M.| Jarka, P.| Kępińska, M.| Nowak, M.| Tański, T.| Stróż, D.| Szade, J.| Balin, K.| Rzychoń, T.2020Applied Surface Science10.1016/j.apsusc.2020.146138
Road Detection Based on Shearlet for GF-3 Synthetic Aperture Radar ImagesSun, Z.| Lin, D.| Wei, W.| Wozniak, M.| Damasevicius, R.2020IEEE Access10.1109/ACCESS.2020.2966580
Microscopic investigations of morphology and thermal properties of ZnO thin films grown by atomic layer deposition methodKaźmierczak-Bałata, A.| Bodzenta, J.| Guziewicz, M.2020Ultramicroscopy10.1016/j.ultramic.2019.112923
Impulsive effects on stability and passivity analysis of memristor-based fractional-order competitive neural networksRajchakit, G.| Chanthorn, P.| Niezabitowski, M.| Raja, R.| Baleanu, D.| Pratap, A.2020Neurocomputing10.1016/j.neucom.2020.07.036
Electrochemical and optical aspects of cobalt meso-carbazole substituted porphyrin complexesLaba, K.| Lapkowski, M.| Officer, D.L.| Wagner, P.| Data, P.2020Electrochimica Acta10.1016/j.electacta.2019.135140
Assessment of gait stability and preferred walking speed in virtual realityWodarski, P.| Jurkojć, J.| Polechoński, J.| Bieniek, A.| Chrzan, M.| Michnik, R.| Gzik, M.2020Acta of Bioengineering and Biomechanics10.5277/ABB-01490-2019-03
Antibacterial and cytocompatible coatings based on poly(adipic anhydride) for a Ti alloy surfaceLeśniak-Ziółkowska, K.| Śmiga-Matuszowicz, M.| Blacha-Grzechnik, A.| Student, S.| Brzychczy-Włoch, M.| Krok-Borkowicz, M.| Pamuła, E.| Simka, W.| Kazek-Kęsik, A.2020Bioactive Materials10.1016/j.bioactmat.2020.04.020
Identification of stress states in compressed masonry walls using a non-destructive technique (NDT)Jasiński, R.2020Materials10.3390/ma13122852
Using Fractional Calculus in an Attempt at Modeling a High Frequency AC ExciterMajka, Ł.2020Lecture Notes in Electrical Engineering10.1007/978-3-030-17344-9_5
The phase transitions in selective laser-melted 18-NI (300-grade) maraging steelKról, M.| Snopiński, P.| Czech, A.2020Journal of Thermal Analysis and Calorimetry10.1007/s10973-020-09316-4
Landfill slope stability improvement incorporating reinforcements in reclamation process applying observational methodKoda, E.| Kiersnowska, A.| Kawalec, J.| Osiński, P.2020Applied Sciences (Switzerland)10.3390/app10051572
AQUA-DUCT 1.0: Structural and functional analysis of macromolecules from an intramolecular voids perspectiveMagdziarz, T.| Mitusińska, K.| Bzówka, M.| Raczyńska, A.| Stańczak, A.| Banas, M.| Bagrowska, W.| Góra, A.2020Bioinformatics10.1093/bioinformatics/btz946
Alchemy of donor-acceptor-donor multi-photofunctional organic materials: From construction of electron-deficient azaaromatics to exploration of functionsTakeda, Y.| Data, P.| Minakata, S.2020Chemical Communications10.1039/d0cc03322g
Comparison of filtering methods for enhanced reliability of a train axle counter systemGrzechca, D.| Szczeponik, A.2020Sensors (Switzerland)10.3390/s20102754
Physico-chemical and biological evaluation of doxycycline loaded into hybrid oxide-polymer layer on Ti–Mo alloyKazek-Kęsik, A.| Nosol, A.| Płonka, J.| Śmiga-Matuszowicz, M.| Student, S.| Brzychczy-Włoch, M.| Krok-Borkowicz, M.| Pamuła, E.| Simka, W.2020Bioactive Materials10.1016/j.bioactmat.2020.04.009
Thermoelectric properties of thin films from sorted single-walled carbon nanotubesPodlesny, B.| Kumanek, B.| Borah, A.| Yamaguchi, R.| Shiraki, T.| Fujigaya, T.| Janas, D.2020Materials10.3390/MA13173808
Biosurfactants: Eco-friendly and innovative biocides against biocorrosionPłaza, G.| Achal, V.2020International Journal of Molecular Sciences10.3390/ijms21062152
Highly efficient biphasic system for the synthesis of alkyl lactates in the presence of acidic ionic liquidsDorosz, U.| Barteczko, N.| Latos, P.| Erfurt, K.| Pankalla, E.| Chrobok, A.2020Catalysts10.3390/catal10010037
Precipitation Strengthening of Cu-Ni-Si AlloyKrupińska, B.| Rdzawski, Z.| Krupiński, M.| Pakiela, W.2020Materials10.3390/ma13051182
Structure and magnetic properties of ultrafine superparamagnetic Sn-doped magnetite nanoparticles synthesized by glycol assisted co-precipitation methodRadoń, A.| Kubacki, J.| Kądziołka-Gaweł, M.| Gębara, P.| Hawełek| Topolska, S.| Łukowiec, D.2020Journal of Physics and Chemistry of Solids10.1016/j.jpcs.2020.109530
Evaluation of conceptual electrolysis-based energy storage systems using gas expandersBartela| Katla, D.| Skorek-Osikowska, A.2020International Journal of Hydrogen Energy10.1016/j.ijhydene.2020.01.233
Analysis of the storage capacity and charging and discharging power in energy storage systems based on historical data on the day-ahead energy market in PolandLepszy, S.2020Energy10.1016/j.energy.2020.118815
Estimation of the energy consumption of battery electric buses for public transport networks using real-world data and deep learningPamuła, T.| Pamuła, W.2020Energies10.3390/en13092340
Forecasting the structure of energy production from renewable energy sources and biofuels in PolandBrodny, J.| Tutak, M.| Saki, S.A.2020Energies10.3390/en13102539
The application of molten salt energy storage to advance the transition from coal to green energy power systemsKosman, W.| Rusin, A.2020Energies10.3390/en13092222
Sustainable development and industry 4.0: A bibliometric analysis identifying key scientific problems of the sustainable industry 4.0Gajdzik, B.Z.| Grabowska, S.| Saniuk, S.| Wieczorek, T.2020Energies10.3390/en13164254
Protein secondary structure prediction: A review of progress and directionsSmolarczyk, T.| Roterman-Konieczna, I.| Stapor, K.2020Current Bioinformatics10.2174/1574893614666191017104639
Comparison of Indices Derived from Poincaré Maps on Electrocardiograms and SeismocardiogramsSieciński, S.| Kostka, P.| Piaseczna, N.| Wadas, M.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-29885-2_2
Nano-RU supported on ni nanowires for low-temperature carbon dioxide methanationSiudyga, T.| Kapkowski, M.| Janas, D.| Wasiak, T.| Sitko, R.| Zubko, M.| Szade, J.| Balin, K.| Klimontko, J.| Lach, D.| Popiel, J.| Smoliński, A.| Polanski, J.2020Catalysts10.3390/catal10050513
Analysis of free and combined chlorine concentrations in swimming pool water and an attempt to determine a reliable water sampling pointWyczarska-Kokot, J.| Lempart-Rapacewicz, A.| Dudziak, M.2020Water (Switzerland)10.3390/w12020311
Environmental sustainability of the vehicle fleet change in public city transport of selected city in central EuropeKonečný, V.| Gnap, J.| Settey, T.| Petro, F.| Skrúcaný, T.| Figlus, T.2020Energies10.3390/en13153869
SbSI Composites based on epoxy resin and cellulose for energy harvesting and sensors-the influence of SBSI nanowires conglomeration on piezoelectric propertiesToroń, B.| Szperlich, P.| Kozioł, M.2020Materials10.3390/ma13040902
Deep Learning for Multiple-Image Super-ResolutionKawulok, M.| Benecki, P.| Piechaczek, S.| Hrynczenko, K.| Kostrzewa, D.| Nalepa, J.2020IEEE Geoscience and Remote Sensing Letters10.1109/LGRS.2019.2940483
Identification of thermal parameters of a building envelope based on the cooling process of a building objectPokorska-Silva, I.| Nowoświat, A.| Fedorowicz, L.2020Journal of Building Physics10.1177/1744259119881167
In vitro biological characterization of silver-doped anodic oxide coating on titaniumOleshko, O.| Liubchak, I.| Husak, Y.| Korniienko, V.| Yusupova, A.| Oleshko, T.| Banasiuk, R.| Szkodo, M.| Matros-Taranets, I.| Kazek-Kęsik, A.| Simka, W.| Pogorielov, M.2020Materials10.3390/ma13194359
Quality control of the continuous hot pressing process of medium density fiberboard using fuzzy failure mode and effects analysisLv, Y.| Liu, Y.| Jing, W.| Woźniak, M.| Damaševičius, R.| Scherer, R.| Wei, W.2020Applied Sciences (Switzerland)10.3390/app10134627
Dynamic scheduling algorithm for delay-sensitive vehicular safety applications in cellular networkWu, Q.| Fan, X.| Wei, W.| Woźniak, M.2020Information Technology and Control10.5755/j01.itc.49.1.24113
The factors determining the number of the endangered people in a case of fire in a road tunnelKról, A.| Król, M.2020Fire Safety Journal10.1016/j.firesaf.2019.102942
Methodology of advanced data validation and reconciliation application in industrial thermal processesSzega, M.2020Energy10.1016/j.energy.2020.117326
Metabolic profiles in the course of the shikimic acid pathway of Raphanus sativus var. longipinnatus exposed to mesotrione and its degradation productsPłonka, J.| Górny, A.| Kokoszka, K.| Barchanska, H.2020Chemosphere10.1016/j.chemosphere.2019.125616
In-situ XRD investigations of FeAl intermetallic phase-based alloy oxidationCebulski, J.| Pasek, D.| Bik, M.| Świerczek, K.| Jeleń, P.| Mroczka, K.| Dąbrowa, J.| Zajusz, M.| Wyrwa, J.| Sitarz, M.2020Corrosion Science10.1016/j.corsci.2019.108344
Operational load monitoring of a composite panel using artificial neural networksMucha, W.| Kuś, W.| Viana, J.C.| Nunes, J.P.2020Sensors (Switzerland)10.3390/s20092534
Medium shift influence on nitrogen removal bacteria: Ecophysiology and anammox process performanceBanach-Wiśniewska, A.| Tomaszewski, M.| Cema, G.| Ziembińska-Buczyńska, A.2020Chemosphere10.1016/j.chemosphere.2019.124597
Static magnetic field and extremely low-frequency magnetic field in hybrid and electric vehiclesWyszkowska, J.| Szczygieł, M.| Trawiński, T.2020Przeglad Elektrotechniczny10.15199/48.2020.02.13
Fabrication of tic-reinforced surface layers on ductile cast iron substrate by laser surface alloyingJanicki, D.2020Solid State Phenomena10.4028/www.scientific.net/SSP.308.76
Strengthening of AA5754 aluminum alloy by DRECE process followed by annealing response investigationSnopínski, P.| Tánski, T.| Golombek, K.| Rusz, S.| Hilser, O.| Donič, T.| Nuckowski, P.M.| Benedyk, M.2020Materials10.3390/ma13020301
Procedure for in-fly particle temperature detection under combustion conditionsSładek, S.| Katelbach-Woźniak, A.| Adamczyk, W.P.| Klimanek, A.| Korus, A.| Szlęk, A.2020Energy10.1016/j.energy.2019.116410
Effect of severe plastic deformation on mechanical and fatigue behavior of medium-C sheet steelRusz, S.| Hilšer, O.| Ochodek, V.| Čížek, L.| Kraus, M.| Mareš, V.| Grajcar, A.| Švec, J.2020Journal of Mining and Metallurgy, Section B: Metallurgy10.2298/JMMB190910008R
PEG grafted polymethacrylates bearing antioxidants as a new class of polymer conjugates for application in cosmetologyOdrobińska, J.| Neugebauer, D.2020Materials10.3390/MA13163455
Micellar carriers based on amphiphilic peg/pcl graft copolymers for delivery of active substancesOdrobińska, J.| Neugebauer, D.2020Polymers10.3390/polym12122876
Effect of support structure and polyamine type on CO2 capture in hierarchically structured monolithic sorbentsMaresz, K.| Ciemięga, A.| Malinowski, J.J.| Mrowiec-Białoń, J.2020Chemical Engineering Journal10.1016/j.cej.2019.123175
Evaluation of ferromagnetic steel hardness based on an analysis of the Barkhausen noise number of eventsRoskosz, M.| Fryczowski, K.| Schabowicz, K.2020Materials10.3390/MA13092059
Strain-ageing of low-alloyed multiphase high-strength steelsSamek, L.| Dykas, J.| De Moor, E.| Grajcar, A.2020Metals10.3390/met10040439
On a Sparse Approximation of Compressible SignalsDziwoki, G.| Kucharczyk, M.2020Circuits, Systems, and Signal Processing10.1007/s00034-019-01287-8
Assessment of improvement in the energy and exergy efficiency of the gas heat plant after the exhaust gas cooled down below the dew point and the use of recovered heatOstrowski, P.| Szelejewski, F.| Zymelka, P.2020Energy10.1016/j.energy.2019.116179
Long term Hurst memory that does not die at long observation times—Deterministic map to describe ion channel activityBorys, P.2020Chaos, Solitons and Fractals10.1016/j.chaos.2019.109560
Elimination of the hormesis phenomenon by the use of synthetic sea water in a toxicity test towards Aliivibrio fischeriDrzymała, J.| Kalka, J.2020Chemosphere10.1016/j.chemosphere.2020.126085
Ecotoxic interactions between pharmaceuticals in mixtures: Diclofenac and sulfamethoxazoleDrzymała, J.| Kalka, J.2020Chemosphere10.1016/j.chemosphere.2020.127407
Model of Process Management System in Enterprises of the Hard Coal Mining IndustryBijańska, J.| Wodarski, K.2020Management Systems in Production Engineering10.2478/mspe-2020-0017
Testing joints between walls made of AAC masonry unitsJasiński, R.| Galman, I.2020Buildings10.3390/BUILDINGS10040069
A review of Cloud computing technologies for comprehensive microRNA analysesMrozek, D.2020Computational Biology and Chemistry10.1016/j.compbiolchem.2020.107365
Atypical decomposition processes of Sm2Zr2O7 + 8YSZ dual-phase TBCs during hot corrosionMoskal, G.| Jucha, S.| Mikuśkiewicz, M.| Migas, D.| Jasik, A.2020Corrosion Science10.1016/j.corsci.2020.108681
Impact of surface treatment on the functional properties stainless steel for biomedical applicationsBasiaga, M.| Walke, W.| Antonowicz, M.| Kajzer, W.| Szewczenko, J.| Domanowska, A.| Michalewicz, A.| Szindler, M.| Staszuk, M.| Czajkowski, M.2020Materials10.3390/ma13214767
Electric vehicles - problems and issuesMacioszek, E.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-35543-2_14
Combining amino acids and carbohydrates into readily biodegradable, task specific ionic liquidsBrzęczek-Szafran, A.| Więcek, P.| Guzik, M.| Chrobok, A.2020RSC Advances10.1039/d0ra03664a
Damage progression in fibre reinforced polymer composites subjected to low-velocity repeated impact loadingKatunin, A.| Pawlak, S.| Wronkowicz-Katunin, A.| Tutajewicz, D.2020Composite Structures10.1016/j.compstruct.2020.112735
Evolution of the microstructure and mechanical properties of HR3C austenitic stainless steel after ageing for up to 30,000 h at 650–750 °CZieliński, A.| Golański, G.| Sroka, M.2020Materials Science and Engineering A10.1016/j.msea.2020.139944
Performance of concrete with low CO2 emissionGiergiczny, Z.| Król, A.| Tałaj, M.| Wandoch, K.2020Energies10.3390/en13174328
On Unsupervised and Supervised Discretisation in Mining Stylometric FeaturesStańczyk, U.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_15
Studies of NO2 gas-sensing characteristics of a novel room-temperature surface-photovoltage gas sensor deviceKwoka, M.| Szuber, J.2020Sensors (Switzerland)10.3390/s20020408
The True Amphipathic Nature of Graphene Flakes: A Versatile 2D StabilizerKuziel, A.W.| Milowska, K.Z.| Chau, P.-L.| Boncel, S.| Koziol, K.K.| Yahya, N.| Payne, M.C.2020Advanced Materials10.1002/adma.202000608
Deep Recurrent Neural Networks for Human Activity Recognition During SkiingPawlyta, M.| Hermansa, M.| Szczęsna, A.| Janiak, M.| Wojciechowski, K.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_13
Atomically dispersed cerium species in NMxCe1-xO2/Al2O3 (NM = Rh, Ru) catalystsLedwa, K.A.| Kepinski, L.| Pawlyta, M.2020Materials Research Bulletin10.1016/j.materresbull.2019.110673
Intelligent automation of dental material analysis using robotic arm with Jerk optimized trajectoryDamaševičius, R.| Maskeliūnas, R.| Narvydas, G.| Narbutaitė, R.| Połap, D.| Woźniak, M.2020Journal of Ambient Intelligence and Humanized Computing10.1007/s12652-020-02605-8
Queues with the Dropping Function and Non-Poisson ArrivalsChydzinski, A.2020IEEE Access10.1109/ACCESS.2020.2976147
Effect of conductive polymers on the optical properties of electrospun polyacrylonitryle nanofibers filled by polypyrrole, polythiophene and polyanilineMatysiak, W.| Tański, T.| Smok, W.| Gołombek, K.| Schab-Balcerzak, E.2020Applied Surface Science10.1016/j.apsusc.2019.145068
Microstructure and mechanical properties of TP347HFG austenitic stainless steel after long-term serviceGolański, G.| Zieliński, A.| Sroka, M.2020International Journal of Pressure Vessels and Piping10.1016/j.ijpvp.2020.104160
Gradient Boosting Application in Forecasting of Performance Indicators Values for Measuring the Efficiency of Promotions in FMCG RetailHenzel, J.| Sikora, M.2020Proceedings of the 2020 Federated Conference on Computer Science and Information Systems, FedCSIS 202010.15439/2020F118
DETECTION of SLAG INCLUSIONS in MMA JOINTS with PASSIVE THERMOGRAPHY TECHNIQUESJamrozik, W.| Górka, J.| Kiel-Jamrozik, M.2020Diagnostyka10.29354/diag/122843
Uv-catalyzed persulfate oxidation of an anthraquinone based dyeKrawczyk, K.| Wacławek, S.| Kudlek, E.| Silvestri, D.| Kukulski, T.| Grübel, K.| Padil, V.V.T.| Černík, M.2020Catalysts10.3390/catal10040456
Novel β-ketoenamines versus azomethines for organic electronics: characterization of optical and electrochemical properties supported by theoretical studiesKorzec, M.| Kotowicz, S.| Rzycka-Korzec, R.| Schab-Balcerzak, E.| Małecki, J.G.| Czichy, M.| Łapkowski, M.2020Journal of Materials Science10.1007/s10853-019-04210-3
The magnetisation process of bulk amorphous alloys: Fe36+xCo36-xY8B20, where: x =0, 3, 7, or 12Bloch, K.| Nabialek, M.| Postawa, P.| Sandu, A.V.| Sliwa, A.| Jez, B.2020Materials10.3390/ma13040846
Multifractal Properties of BK Channel Currents in Human Glioblastoma CellsWawrzkiewicz-Jałowiecka, A.| Trybek, P.| Dworakowska, B.| Machura, L.2020Journal of Physical Chemistry B10.1021/acs.jpcb.0c00397
Development of antibacterial, ciprofloxacin-eluting biodegradable coatings on Ti6Al7Nb implants to prevent peri-implant infectionsJaworska, J.| Jelonek, K.| Jaworska-Kik, M.| Musiał-Kulik, M.| Marcinkowski, A.| Szewczenko, J.| Kajzer, W.| Pastusiak, M.| Kasperczyk, J.2020Journal of Biomedical Materials Research - Part A10.1002/jbm.a.36877
Improving the quality of clustering-based diagnostic rules by lowering dimension of the cluster prototypesPorebski, S.| Straszecka, E.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-19738-4_6
Influence of Co substitution for Fe on magnetic properties and crystal structure of soft magnetic Fe81.3Mo0.2Cu0.5Si4B14 alloyHawelek, L.| Polak, M.| Wlodarczyk, P.| Zackiewicz, P.| Radon, A.| Lukowiec, D.| Hreczka, M.| Kolano-Burian, A.2020Journal of Magnetism and Magnetic Materials10.1016/j.jmmm.2020.166681
The effect of the pelvis position in the sagittal plane on loads in the human musculoskeletal systemMichnik, R.| Zadoń, H.| Nowakowska-Lipiec, K.| Jochymczyk-Woźniak, K.| Myśliwiec, A.| Mitas, A.W.2020Acta of Bioengineering and Biomechanics10.37190/ABB-01606-2020-02
The method of combating coal spontaneous combustion hazard in goafs-a case studySzurgacz, D.| Tutak, M.| Brodny, J.| Sobik, L.| Zhironkina, O.2020Energies10.3390/en13174538
Influence of magnetite nanoparticles surface dissolution, stabilization and functionalization by malonic acid on the catalytic activity, magnetic and electrical propertiesRadoń, A.| Łoński, S.| Kądziołka-Gaweł, M.| Gębara, P.| Lis, M.| Łukowiec, D.| Babilas, R.2020Colloids and Surfaces A: Physicochemical and Engineering Aspects10.1016/j.colsurfa.2020.125446
High Port-to-Port Isolation Dual-Polarized Antenna Array Dedicated for Full-Duplex Base StationsWojcik, D.| Surma, M.| Noga, A.| Magnuski, M.2020IEEE Antennas and Wireless Propagation Letters10.1109/LAWP.2020.2989698
Improving the power unit operation flexibility by the turbine start-up optimizationNowak, G.| Rusin, A.| Łukowicz, H.| Tomala, M.2020Energy10.1016/j.energy.2020.117303
Logistic Flow Control System in Green Supply ChainsOsintsev, N.| Rakhmangulov, A.| Sładkowski, A.| Dyorina, N.2020Lecture Notes in Networks and Systems10.1007/978-3-030-42323-0_6
Statistical methods for determining rheological parameters of mortars modified with multi-walled carbon nanotubesKostrzanowska-Siedlarz, A.2020Construction and Building Materials10.1016/j.conbuildmat.2020.119213
Comparative analysis of laser and plasma surfacing by nickel-based superalloy of heat resistant steelCzupryński, A.| Wygledacz, B.2020Materials10.3390/ma13102367
Influence of copper addition and heat treatment parameters on nanocrystallization process of Fe-Co-Mo-B-Si amorphous ribbons with high saturation magnetization about 1.6 TRadoń, A.| Babilas, R.| Włodarczyk, P.| Zackiewicz, P.| Łukowiec, D.| Polak, M.| Kądziołka-Gaweł, M.| Kolano-Burian, A.| Hawełek2020Journal of Magnetism and Magnetic Materials10.1016/j.jmmm.2019.165951
The structure of amyloid versus the structure of globular proteinsFabian, P.| Banach, M.| Stapor, K.| Konieczny, L.| Ptak-Kaczor, M.| Roterman, I.2020International Journal of Molecular Sciences10.3390/ijms21134683
NAS-HRIS: Automatic design and architecture search of neural network for semantic segmentation in remote sensing imagesZhang, M.| Jing, W.| Lin, J.| Fang, N.| Wei, W.| Woźniak, M.| Damaševičius, R.2020Sensors (Switzerland)10.3390/s20185292
The morphology and mechanical properties of ESD coatings before and after laser beam machiningRadek, N.| Pietraszek, J.| Gadek-Moszczak, A.| Orman, L.J.| Szczotok, A.2020Materials10.3390/ma13102331
External restraint factors in early-age massive foundation slabsKlemczak, B.| Żmij, A.2020ACI Structural Journal10.14359/51721362
A Hybrid Heuristic Algorithm for Multi-manned Assembly Line Balancing Problem with Location ConstraintsKrenczyk, D.| Dziki, K.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-20055-8_32
Shaping the acoustic radiation of a vibrating plateWrona, S.| Pawelczyk, M.| Qiu, X.2020Journal of Sound and Vibration10.1016/j.jsv.2020.115285
Convenient but powerful method to dope single-walled carbon nanotube films with iodonium saltsKumanek, B.| Przypis, Ł.| Wróbel, P.S.| Krzywiecki, M.| Walczak, K.Z.| Janas, D.2020Applied Nanoscience (Switzerland)10.1007/s13204-019-01133-y
Electrochemical impedance spectroscopy as a versatile tool for the characterization of neural tissue: A mini reviewKrukiewicz, K.2020Electrochemistry Communications10.1016/j.elecom.2020.106742
The use of artificial neural networks to analyze greenhouse gas and air pollutant emissions from the mining and quarrying sector in the European UnionBrodny, J.| Tutak, M.2020Energies10.3390/en13081925
Caffeic acid phenethyl ester (CAPE) induced apoptosis in serous ovarian cancer OV7 cells by deregulation of BCL2/BAX genesKleczka, A.| Kubina, R.| Dzik, R.| Jasik, K.| Stojko, J.| Cholewa, K.| Kabała-Dzik, A.2020Molecules10.3390/molecules25153514
Numerical research on the SNCR method in a grate boiler equipped with the innovative FJBS systemGarbacz, P.| Wejkowski, R.2020Energy10.1016/j.energy.2020.118240
Effect of grain size on the microstructure and strain hardening behavior of solution heat-treated low-c high-mn steelOpiela, M.| Fojt-Dymara, G.| Grajcar, A.| Borek, W.2020Materials10.3390/ma13071489
Investigation of the Susceptibility of the WE54 Magnesium-Based Alloy to Stress Corrosion CrackingSozańska, M.| Mościcki, A.2020Journal of Materials Engineering and Performance10.1007/s11665-019-04550-w
Mitigation of nonlinear distortions for a 100 gb/s radio-over-fiber-based wdm networkRahman, S.| Ali, F.| Smagor, A.| Muhammad, F.| Habib, U.| Glowacz, A.| Ahmad, S.| Irfan, M.| Smalcerz, A.| Kula, A.| Mursal, S.N.F.2020Electronics (Switzerland)10.3390/electronics9111796
Evaluation of an α type stirling engine regenerator using a new differential modelRutczyk, B.| Szczygieł, I.| Kabaj, A.2020Energy10.1016/j.energy.2020.118369
Melting point depression of ionic liquids by their confinement in carbons of controlled mesoporosityBéguin, F.| Pavlenko, V.| Przygocki, P.| Pawlyta, M.| Ratajczak, P.2020Carbon10.1016/j.carbon.2020.07.071
Comparison of the crystal structure and wear resistance of co-based alloys with low carbon content manufactured by selective laser sintering and powder injection moldingZiębowicz, A.| Matus, K.| Pawlyta, M.| Pakieła, W.| Matula, G.2020Crystals10.3390/cryst10030197
Inexpensive and tuneable protic ionic liquids based on sulfuric acid for the biphasic synthesis of alkyl levulinatesPrzypis, M.| Matuszek, K.| Chrobok, A.| Swadźba-Kwaśny, M.| Gillner, D.2020Journal of Molecular Liquids10.1016/j.molliq.2020.113166
Studies on the solubility of terephthalic acid in ionic liquidsMatuszek, K.| Pankalla, E.| Grymel, A.| Latos, P.| Chrobok, A.2020Molecules10.3390/molecules25010080
Flow properties of ash and slag under co-gasification of coal and extract residue of direct coal liquefaction residueCao, X.| Peng, B.| Kong, L.| Bai, J.| Ge, Z.| Li, H.| Liu, Z.| Feng, Z.| Bi, D.| Bai, Z.| Szlęk, A.| Li, W.2020Fuel10.1016/j.fuel.2019.116850
Mathematical model of the solar pyrolysis of biomassKaczor, Z.| Bulinski, Z.| Werle, S.2020Journal of Energy Resources Technology, Transactions of the ASME10.1115/1.4046601
Experiences on early age cracking of wall-on-slab concrete structuresJędrzejewska, A.| Kanavaris, F.| Zych, M.| Schlicke, D.| Azenha, M.2020Structures10.1016/j.istruc.2020.06.013
Vortex nucleation and propagation in magnetic double-wedges and semi-squares for reliable quaternary storage systemsSudsom, D.| Blachowicz, T.| Hahn, L.| Ehrmann, A.2020Journal of Magnetism and Magnetic Materials10.1016/j.jmmm.2020.167294
Low-noble-metal-loading hybrid catalytic system for oxygen reduction utilizing reduced-graphene-oxide-supported platinum aligned with carbon-nanotube-supported iridiumDembinska, B.| Zlotorowicz, A.| Modzelewska, M.| Miecznikowski, K.| Rutkowska, I.A.| Stobinski, L.| Malolepszy, A.| Krzywiecki, M.| Zak, J.| Negro, E.| Di Noto, V.| Kulesza, P.J.2020Catalysts10.3390/catal10060689
Detection of Speech Impairments Using Cepstrum, Auditory Spectrogram and Wavelet Time Scattering Domain FeaturesLauraitis, A.| Maskeliunas, R.| Damaševičius, R.| Krilavičius, T.2020IEEE Access10.1109/ACCESS.2020.2995737
Waste-to-energy technology integrated with carbon capture – Challenges and opportunitiesWienchol, P.| Szlęk, A.| Ditaranto, M.2020Energy10.1016/j.energy.2020.117352
Hygrothermal risk in museum buildings located in moderate climateFerdyn-Grygierek, J.| Kaczmarczyk, J.| Blaszczok, M.| Lubina, P.| Koper, P.| Bulinska, A.2020Energies10.3390/en13020344
NAP-XPS and in Situ DRIFTS of the Interaction of CO with Au Nanoparticles Supported by Ce1- xEuxO2 NanocubesBezkrovnyi, O.S.| Blaumeiser, D.| Vorokhta, M.| Kraszkiewicz, P.| Pawlyta, M.| Bauer, T.| Libuda, J.| Kepinski, L.2020Journal of Physical Chemistry C10.1021/acs.jpcc.9b10142
Technical and environmental viability of a European CO2 EOR systemThorne, R.J.| Sundseth, K.| Bouman, E.| Czarnowska, L.| Mathisen, A.| Skagestad, R.| Stanek, W.| Pacyna, J.M.| Pacyna, E.G.2020International Journal of Greenhouse Gas Control10.1016/j.ijggc.2019.102857
Different features of control systems for single-phase voltage source invertersRymarski, Z.| Bernacki, K.2020Energies10.3390/en13164100
Systemic effects of radiotherapy and concurrent chemo-radiotherapy in head and neck cancer patients—comparison of serum metabolome profilesJelonek, K.| Krzywon, A.| Jablonska, P.| Slominska, E.M.| Smolenski, R.T.| Polanska, J.| Rutkowski, T.| Mrochem-Kwarciak, J.| Skladowski, K.| Widlak, P.2020Metabolites10.3390/metabo10020060
Magnetic methods of characterization of active stresses in steel elementsRoskosz, M.| Fryczowski, K.2020Journal of Magnetism and Magnetic Materials10.1016/j.jmmm.2019.166272
Structure of the hydrophobic core determines the 3d protein structure—verification by single mutation proteinsBanach, M.| Fabian, P.| Stapor, K.| Konieczny, L.| Roterman, I.2020Biomolecules10.3390/biom10050767
Prediction of Pilot's Reaction Time Based on EEG SignalsBinias, B.| Myszor, D.| Palus, H.| Cyran, K.A.2020Frontiers in Neuroinformatics10.3389/fninf.2020.00006
Hydrogen embrittlement and oxide layer effect in the cathodically charged zircaloy-2Gajowiec, G.| Bartmański, M.| Majkowska-Marzec, B.| Zieliński, A.| Chmiela, B.| Derezulko, M.2020Materials10.3390/MA13081913
Synthesis and characterization of ionic graft copolymers: Introduction and in vitro release of antibacterial drug by anion exchangeNiesyto, K.| Neugebauer, D.2020Polymers10.3390/POLYM12092159
Experiments and numerical simulations of the annealing temperature influence on the residual stresses level in s700mc steel welded elementsKik, T.| Moravec, J.| Švec, M.2020Materials10.3390/ma13225289
Importance of air humidity and contaminations in the internal and external transonic flowsWi&0015B;niewski, P.| Dykas, S.| Yamamoto, S.2020Energies10.3390/en13123153
Optimizing predictor variables in artificial neural networks when forecasting raw material prices for energy productionMatyjaszek, M.| Valverde, G.F.| Krzemień, A.| Wodarski, K.| Fernández, P.R.2020Energies10.3390/en13082017
Ultrasound-assisted green synthesis of dialkyl peroxides under phase-transfer catalysis conditionsKopeć, D.| Baj, S.| Siewniak, A.2020Molecules10.3390/molecules25010118
Environmental Aspects of the Production and Use of Biofuels in TransportPanchuk, M.| Kryshtopa, S.| Sładkowski, A.| Panchuk, A.2020Lecture Notes in Networks and Systems10.1007/978-3-030-42323-0_3
Ternary Pt/Re/SnO2/C catalyst for EOR: Electrocatalytic activity and durability enhancementDrzymała, E.| Gruzeł, G.| Depciuch, J.| Pawlyta, M.| Donten, M.| Parlinska-Wojtan, M.2020Nano Research10.1007/s12274-020-2704-1
Traffic measurements for development a transport modelKłos, M.J.| Sobota, A.| Żochowska, R.| Soczówka, P.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-35543-2_21
Decoration of Cube-Like Ceria Crystals by Well-Dispersed Au Nanoparticles: Surface InfluenceMałecka, M.A.| Matus, K.| Woźniak, P.2020ChemistrySelect10.1002/slct.202000098
Electrochemical and biological performance of biodegradable polymer coatings on Ti6Al7Nb alloyKajzer, W.| Szewczenko, J.| Kajzer, A.| Basiaga, M.| Kaczmarek, M.| Antonowicz, M.| Jaworska, J.| Jelonek, K.| Orchel, A.| Nowińska, K.| Kasperczyk, J.2020Materials10.3390/ma13071758
In situ experimental study on the active support used for building rectificationGromysz, K.2020Materials10.3390/MA13092015
Charging station distribution model-the concept of using the locations of petrol stations in the cityStaniek, M.| Sierpiński, G.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-34069-8_9
Microclimate conditions in rooms: Their impact on mold development in buildingsOrlik-Kozdoń, B.2020Energies10.3390/en13174492
Evaluation of electrochemical properties of antibacterial ZnO layers deposited to 316LVM steel using atomic layer depositionBasiaga, M.| Walke, W.| Antonowicz, M.| Szindler, M.| Nakonieczny, D.| Kajzer, W.| Dubiel, A.| Matus, K.2020Materialwissenschaft und Werkstofftechnik10.1002/mawe.202000025
N-hydroxyphthalimide supported on silica coated with ionic liquids containing CoCl2 (SCILLs) as new catalytic system for solvent-free ethylbenzene oxidationDobras, G.| Kasperczyk, K.| Jurczyk, S.| Orlińska, B.2020Catalysts10.3390/catal10020252
Dimensional optimization of the robotic arm to reduce energy consumptionMostyn, V.| Huczala, D.| Moczulski, W.| Timofiejczuk, A.2020MM Science Journal10.17973/MMSJ.2020_03_2020001
On Stability of Feature Selection Based on MALDI Mass Spectrometry Imaging Data and Simulated BiopsyWilk, A.| Gawin, M.| Frątczak, K.| Widłak, P.| Fujarewicz, K.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-29885-2_8
Functionalization of PEO layer formed on Ti-15Mo for biomedical applicationLeśniak, K.| Płonka, J.| Śmiga-Matuszowicz, M.| Brzychczy-Włoch, M.| Kazek-Kęsik, A.2020Journal of Biomedical Materials Research - Part B Applied Biomaterials10.1002/jbm.b.34504
Analysis of strain field heterogeneity at the microstructure level and inverse identification of composite constituents by means of digital image correlationOgierman, W.| Kokot, G.2020Materials10.3390/ma13020287
Effect of chromium and molybdenum addition on the microstructure of in situ tic-reinforced composite surface layers fabricated on ductile cast iron by laser alloyingJanicki, D.2020Materials10.3390/ma13245750
Dilatometric and microstructural study of martensite tempering in 4% Mn steelGrajcar, A.| Morawiec, M.| Jimenez, J.A.| Garcia-Mateo, C.2020Materials10.3390/ma13194442
The influence of halloysite on the physicochemical, mechanical and biological properties of polyurethane-based nanocompositesMrówka, M.| Szymiczek, M.| Machoczek, T.| Lenża, J.| Matusik, J.| Sakiewicz, P.| Skonieczna, M.2020Polimery/Polymers10.14314/polimery.2020.11.5
Crashworthiness performance of green composite energy absorbing structure with embedded sensing device providing cleaner environment for sustainable maintenanceIsaac, C.W.2020Sustainable Materials and Technologies10.1016/j.susmat.2020.e00196
The impact of laser surface treatment on the microstructure, wear resistance and hardness of the AlMg5 aluminum alloyPakieła, W.| Tanski, T.| Brytan, Z.| Chladek, G.| Pakieła, K.2020Applied Physics A: Materials Science and Processing10.1007/s00339-020-3350-x
Measuring the power conversion losses in voltage source invertersRymarski, Z.| Bernacki, K.| Dyga, Ł.2020AEU - International Journal of Electronics and Communications10.1016/j.aeue.2020.153359
Intelligent Computing in Inverse ProblemsBurczyński, T.| Kuś, W.| Beluch, W.| Długosz, A.| Poteralski, A.| Szczepanik, M.2020Solid Mechanics and its Applications10.1007/978-3-030-34161-9_5
HKUST-1-supported cerium catalysts for CO oxidationStawowy, M.| Jagódka, P.| Matus, K.| Samojeden, B.| Silvestre-Albero, J.| Trawczyński, J.| Łamacz, A.2020Catalysts10.3390/catal10010108
Homogeneity of sol-gel derived silica-titania waveguide films – Spectroscopic and AFM studiesKarasiński, P.| Domanowska, A.| Gondek, E.| Sikora, A.| Tyszkiewicz, C.| Skolik, M.2020Optics and Laser Technology10.1016/j.optlastec.2019.105840
Method of the analysis of the connectivity of road and street network in terms of division of the city areaSoczówka, P.| Zochowska, R.| Karoń, G.2020Computation10.3390/COMPUTATION8020054
Germline variant burden in cancer genes correlates with age at diagnosis and somatic mutation burdenQing, T.| Mohsen, H.| Marczyk, M.| Ye, Y.| O’Meara, T.| Zhao, H.| Townsend, J.P.| Gerstein, M.| Hatzis, C.| Kluger, Y.| Pusztai, L.2020Nature Communications10.1038/s41467-020-16293-7
Effect of unimodality and bimodality of Pd nanoparticles on the catalytic activity of Pd/SiO2 in the removal of diclofenac from waterKowalewski, E.| Asztemborska, M.| Bonarowska, M.| Matus, K.| Śrębowata, A.2020Catalysis Communications10.1016/j.catcom.2020.106056
Mechanical properties of monolayer MoS2 with randomly distributed defectsAkhter, M.J.| Kuś, W.| Mrozek, A.| Burczyński, T.2020Materials10.3390/ma13061307
Smart Factories in the Age of Industry 4.0Grabowska, S.2020Management Systems in Production Engineering10.2478/mspe-2020-0014
Enantioselective sensing of (S)-Thalidomide in blood plasma with a chiral naphthalene diimide derivativeKowalczyk, A.| Lipiński, P.F.J.| Karoń, K.| Rode, J.E.| Lyczko, K.| Dobrowolski, J.C.| Donten, M.| Kaczorek, D.| Poszytek, J.| Kawęcki, R.| Łapkowski, M.| Malkowska, A.| Grudzinski, I.P.| Nowicka, A.M.2020Biosensors and Bioelectronics10.1016/j.bios.2020.112446
A hybrid tactile sensor-based obstacle overcoming method for hexapod walking robotsLuneckas, M.| Luneckas, T.| Udris, D.| Plonis, D.| Maskeliūnas, R.| Damaševičius, R.2020Intelligent Service Robotics10.1007/s11370-020-00340-9
Thermophysical properties of refractory W-50.4%Re and Mo-39.5%Re thin alloy layers deposited on silicon and silica substratesTrefon-Radziejewska, D.| Juszczyk, J.| Fleming, A.| Podwórny, J.| Chirtoc, M.| Horny, N.| Wrona, A.| Lis, M.| Mazur, M.| Wojcieszak, D.| Kaczmarek, D.| Bodzenta, J.2020International Journal of Refractory Metals and Hard Materials10.1016/j.ijrmhm.2019.105147
Rapid method for the determination of citrate, phosphate and sulfite in seafood by capillary zone electrophoresisGonçalves, S.| Alves, V.R.| Pérez, S.O.| Ferreira, M.| Daguer, H.| de Oliveira, M.A.L.| Micke, G.A.| Vitali, L.2020Food Chemistry10.1016/j.foodchem.2020.126705
Impact of temperature on the physicochemical, structural and biological features of copper-silica nanocompositesDulski, M.| Dudek, K.| Podwórny, J.| Sułowicz, S.| Piotrowska-Seget, Z.| Malarz, K.| Mrozek-Wilczkiewicz, A.| Wolnica, K.| Matus, K.| Peszke, J.| Nowak, A.2020Materials Science and Engineering C10.1016/j.msec.2019.110274
Potassium ferrate (Vi) as the multifunctional agent in the treatment of landfill leachateThomas, M.| Kozik, V.| Barbusiński, K.| Sochanik, A.| Jampilek, J.| Bak, A.2020Materials10.3390/ma13215017
Structure and properties of ZnO coatings obtained by atomic layer deposition (ALD) method on a Cr-Ni-Mo steel substrate typeStaszuk, M.| Pakuła, D.| Reimann, Ł.| Król, M.| Basiaga, M.| Mysłek, D.| Kříž, A.2020Materials10.3390/MA13194223
Modeling and Optimization of Radio-ChemotherapySwierniak, A.| Smieja, J.| Mura, M.| Bajger, P.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-29885-2_20
A mobile application for smart computer-aided self-administered testing of cognition, speech, and motor impairmentLauraitis, A.| Maskeliūnas, R.| Damaševičius, R.| Krilavičius, T.2020Sensors (Switzerland)10.3390/s20113236
Oxidation behavior of the monolayered La2Zr2O7, composite La2Zr2O7 + 8YSZ, and double-ceramic layered La2Zr2O7/La2Zr2O7 + 8YSZ/8YSZ thermal barrier coatingsJasik, A.| Moskal, G.| Mikuśkiewicz, M.| Tomaszewska, A.| Jucha, S.| Migas, D.| Myalska, H.2020Materials10.3390/ma13143242
Experimental Analysis of the Aluminium Melting Process in Industrial Cold Crucible FurnacesPalacz, M.| Melka, B.| Wecki, B.| Siwiec, G.| Przylucki, R.| Bulinski, P.| Golak, S.| Blacha, L.| Smolka, J.2020Metals and Materials International10.1007/s12540-019-00368-2
Linear Regression and CorrelationStapor, K.2020Intelligent Systems Reference Library10.1007/978-3-030-45799-0_3
Structure and corrosion resistance of Al–Cu–Fe alloysBabilas, R.| Bajorek, A.| Spilka, M.| Radoń, A.| Łoński, W.2020Progress in Natural Science: Materials International10.1016/j.pnsc.2020.06.002
Effect of deformation temperature on the mechanical behavior and stability of retained austenite in TRIP-assisted medium-C multiphase steelSkowronek, A.| Grajcar, A.2020Materials10.3390/MA13112433
Impact of cement dust pollution on the surface of sound-absorbing panels on their acoustic propertiesNowoświat, A.| Dulak, L.2020Materials10.3390/ma13061422
Ductility of the tensile zone in bent wooden beams strengthened with cfrp materialsWdowiak-Postulak, A.| Brol, J.2020Materials10.3390/ma13235451
Microstructure characterization and corrosion resistance of zinc coating obtained in a Zn-AlNiBi galvanizing bathKania, H.| Saternus, M.| Kudláček, J.| Svoboda, J.2020Coatings10.3390/COATINGS10080758
Analysis of selected parameters in numerical modeling of low-velocity impact damage in composite structuresDanek, W.| Katunin, A.| Wronkowicz-Katunin, A.2020Procedia Structural Integrity10.1016/j.prostr.2020.04.005
Basic chemical tests of concrete during the assessment of structure suitability-discussion on selected industrial structuresHulimka, J.| Kałuza, M.2020Applied Sciences (Switzerland)10.3390/app10010358
The crystallization of the AlSi9 alloy designed for the alfin processing of ring supports in engine pistonsPiątkowski, J.| Czerepak, M.2020Archives of Foundry Engineering10.24425/afe.2020.131304
A High manganese-tolerant pseudomonas sp. strain isolated from metallurgicalwaste heap can be a tool for enhancing manganese removal from contaminated soilNoszczyńska, M.| Łakomy, K.| Nowacki, K.| Piotrowska-Seget, Z.2020Applied Sciences (Switzerland)10.3390/app10165717
Thermodynamic analysis and isothermal bainitic transformation kinetics in lean medium-Mn steelsMorawiec, M.| Ruiz-Jimenez, V.| Garcia-Mateo, C.| Grajcar, A.2020Journal of Thermal Analysis and Calorimetry10.1007/s10973-020-10259-z
Comparative analysis of carbon, ecological, and water footprints of polypropylene-based composites filled with cotton, jute and kenaf fibersKorol, J.| Hejna, A.| Burchart-Korol, D.| Wachowicz, J.2020Materials10.3390/MA13163541
Standardization of human activities as the component of a workflow efficiency model – A research experiment from a meat producing plantBartnicka, J.| Kabiesz, P.| Kaźmierczak, J.2020Production Engineering Archives10.30657/pea.2020.26.15
Energy and environmental analysis of single-family houses located in PolandGrygierek, K.| Ferdyn-Grygierek, J.| Gumińska, A.| Baran, Ł.| Barwa, M.| Czerw, K.| Gowik, P.| Makselan, K.| Potyka, K.| Psikuta, A.2020Energies10.3390/en13112740
An entropy evaluation algorithm to improve transmission efficiency of compressed data in pervasive healthcare mobile sensor networksCapizzi, G.| Coco, S.| Sciuto, G.L.| Napoli, C.| Hołubowski, W.2020IEEE Access10.1109/ACCESS.2019.2962771
Noise removal in the developing process of digital negativesSzczepański, M.| Giemza, F.2020Sensors (Switzerland)10.3390/s20030902
Unsupervised Segmentation of Hyperspectral Images Using 3-D Convolutional AutoencodersNalepa, J.| Myller, M.| Imai, Y.| Honda, K.-I.| Takeda, T.| Antoniak, M.2020IEEE Geoscience and Remote Sensing Letters10.1109/LGRS.2019.2960945
Catalytic conversion of toluene over a biochar bed under an inert atmosphere – The comparison of chars from different types of wood and the role of selected metalsKorus, A.| Samson, A.| Szlęk, A.2020Fuel10.1016/j.fuel.2020.118468
Is biochar from the torrefaction of sewage sludge hazardous waste?Białowiec, A.| Pulka, J.| Styczyńska, M.| Koziel, J.A.| Kalka, J.| Jureczko, M.| Felis, E.| Manczarski, P.2020Materials10.3390/MA13163544
Comparison of properties of hardfaced layers made by a metal-core-covered tubular electrode with a special chemical compositionCzupryński, A.2020Materials10.3390/ma13235445
Numerical verification of interaction between masonry with precast reinforced lintel made of AAC and reinforced concrete confining elementsDrobiec, L.| Jasiński, R.| Mazur, W.| Rybraczyk, T.2020Applied Sciences (Switzerland)10.3390/APP10165446
Tuning Nano-Nickel Catalyst Hydrogenation Aptitude by On-the-Fly Zirconium DopingZienkiewicz-Machnik, M.| Goszewska, I.| Giziński, D.| Śrębowata, A.| Kuzmowicz, K.| Kubas, A.| Matus, K.| Lisovytskiy, D.| Pisarek, M.| Jacinto, S.á.2020ChemCatChem10.1002/cctc.202000235
Cenospheres and their application advantages in biomedical engineering - A systematic reviewNakonieczny, D.S.| Antonowicz, M.| Paszenda, Z.K.2020Reviews on Advanced Materials Science10.1515/rams-2020-0011
In vitro analysis of quality of dental adhesive bond systems applied in various conditionsTrzcionka, A.| Narbutaite, R.| Pranckeviciene, A.| Maskeliunas, R.| Damaševičius, R.| Narvydas, G.| Połap, D.| Mocny-Pachońska, K.| Wozniak, M.| Tanasiewicz, M.2020Coatings10.3390/COATINGS10090891
A numerical study to determine the effect of strengthening and weakening of the transversus abdominis muscle on lumbar spine loadsNowakowska-Lipiec, K.| Michnik, R.| Linek, P.| Myśliwiec, A.| Jochymczyk-Woźniak, K.| Gzik, M.2020Computer Methods in Biomechanics and Biomedical Engineering10.1080/10255842.2020.1795840
Understanding human behaviour in flight operation using eye-tracking technologyKorek, W.T.| Mendez, A.| Asad, H.U.| Li, W.-C.| Lone, M.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-49183-3_24
Peroxide impact on the fate of veterinary drugs in fertilizersTurek-Szytow, J.| Marciocha, D.| Kalka, J.| Surmacz-Górska, J.2020Chemical Papers10.1007/s11696-019-00883-x
Problematic Use of the Internet - Using Machine Learning in a Prevention ProgrammeProbierz, E.| Gałuszka, A.2020Communications in Computer and Information Science10.1007/978-3-030-50732-9_31
Use of slag from the combustion of solid municipal waste as a partial replacement of cement in mortar and concreteCzop, M.| Lazniewska-Piekarczyk, B.2020Materials10.3390/ma13071593
Low resistance, highly corrugated structures based on poly(3,4-ethylenedioxythiophene) doped with a D-glucopyranoside-derived ionic liquidKrukiewicz, K.| Kobus, D.| Turczyn, R.| Erfurt, K.| Chrobok, A.| Biggs, M.J.P.2020Electrochemistry Communications10.1016/j.elecom.2019.106616
Highly Accurate and Numerically Stable Matrix Computations of the Internal Impedance of Multilayer Cylindrical ConductorsKubiczek, K.| Kampik, M.2020IEEE Transactions on Electromagnetic Compatibility10.1109/TEMC.2018.2890447
Investigation of pellet properties produced from a mix of straw and paper sludgeNosek, R.| Werle, S.| Borsukiewicz, A.| Zelazna, A.| Łagód, G.2020Applied Sciences (Switzerland)10.3390/APP10165450
Origin of the induced pluripotent stem cells affects their differentiation into dopaminergic neuronsChlebanowska, P.| Sułkowski, M.| Skrzypek, K.| Tejchman, A.| Muszyńska, A.| Noroozi, R.| Majka, M.2020International Journal of Molecular Sciences10.3390/ijms21165705
Numerical research of the modification of the combustion system in the Op 650 boilerHernik, B.2020Energies10.3390/en13030725
Optical properties of SrSi2O2N2:Eu2+ phosphor enhanced by the addition of carbonate or fluoride reactive agentsAdamczyk, B.J.| Brik, M.G.| Nagirnyi, V.| Romet, I.| Michalik, D.| Pawlik, T.| Sopicka-Lizer, M.2020Journal of Alloys and Compounds10.1016/j.jallcom.2020.155468
2-Thiohydantoin moiety as a novel acceptor/anchoring group of photosensitizers for dye-sensitized solar cellsBartkowiak, A.| Orwat, B.| Zalas, M.| Ledwon, P.| Kownacki, I.| Tejchman, W.2020Materials10.3390/ma13092065
Determination of local strain distribution at the level of the constituents of particle reinforced composite: An experimental and numerical studyOgierman, W.| Kokot, G.2020Materials10.3390/ma13173889
Use of active synthesis in vibration reduction using an example of a four-storey buildingDymarek, A.| Dzitkowski, T.| Herbuś, K.| Ociepka, P.| Sękala, A.2020JVC/Journal of Vibration and Control10.1177/1077546319898970
Hardware-In-the-Loop Simulations of a GPC-Based Controller in Different Types of Buildings Using Node-REDBismor, D.| Jabłoński, K.| Grychowski, T.| Nas, S.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_85
Performance evaluation of active noise control for a real device casingMazur, K.| Wrona, S.| Pawelczyk, M.2020Applied Sciences (Switzerland)10.3390/app10010377
Emergency preparedness and response in metallurgical processesKarkoszka, T.2020Metalurgija-
Forming and Filtration of Measurement WaveformsPaszek, S.| Boboń, A.| Berhausen, S.| Majka, Ł.| Nocoń, A.| Pruski, P.2020Lecture Notes in Electrical Engineering10.1007/978-3-030-37976-6_5
Fetal electrocardiograms, direct and abdominal with reference heartbeat annotationsMatonia, A.| Jezewski, J.| Kupka, T.| Jezewski, M.| Horoba, K.| Wrobel, J.| Czabanski, R.| Kahankowa, R.2020Scientific Data10.1038/s41597-020-0538-z
Machine learning in object recognition and segmentation by certain class neural networksWestwanska, W.| Respondek, J.2020Proceedings - 2020 20th International Conference on Computational Science and Its Applications, ICCSA 202010.1109/ICCSA50381.2020.00022
Personalization of products in the industry 4.0 concept and its impact on achieving a higher level of sustainable consumptionSaniuk, S.| Grabowska, S.| Gajdzik, B.Z.2020Energies10.3390/en13225895
Cost of equity of coal-fired power generation projects in poland: Its importance for the management of decision-making processSaługa, P.W.| Szczepańska-Woszczyna, K.| Miśkiewicz, R.| Chład, M.2020Energies10.3390/en13184833
In vitro attenuation of astrocyte activation and neuroinflammation through ibuprofen-doping of poly(3,4-ethylenedioxypyrrole) formulationsKrukiewicz, K.| Kowalik, A.| Turczyn, R.| Biggs, M.J.P.2020Bioelectrochemistry10.1016/j.bioelechem.2020.107528
NOM (HA and FA) reduction in water using nano titanium dioxide photocatalysts (P25 and P90) and membranesRajca, M.2020Catalysts10.3390/catal10020249
Structure and corrosion behavior of TiO2 thin films deposited onto Mg-based alloy using magnetron sputtering and sol-gelKania, A.| Pilarczyk, W.| Szindler, M.M.2020Thin Solid Films10.1016/j.tsf.2020.137945
Research and prospects for the development of alternative fuels in the transport sector in poland: A reviewBurchart-Korol, D.| Gazda-Grzywacz, M.| Zarȩbska, K.2020Energies10.3390/en13112988
Laser welding of stainless steelKurc-Lisiecka, A.| Lisiecki, A.2020Journal of Achievements in Materials and Manufacturing Engineering10.5604/01.3001.0014.0815
Measurement of the PMSM current with a current transducer with DSP and FPGARudnicki, T.2020Energies10.3390/en13010209
Microstructure and magnetism of Ni0.5Zn0.5Fe2O4/MWCNTs nanocompositesBajorek, A.| Liszka, B.| Szostak, B.| Pawlyta, M.2020Journal of Magnetism and Magnetic Materials10.1016/j.jmmm.2020.166634
Assessment of Similarity of Elements as a Basis for Production Costs EstimationĆwikła, G.| Grabowik, C.| Bańczyk, K.| Wiecha, Ł.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-20055-8_37
Unprecedented water effect as a key element in salicyl-glycine Schiff base synthesisBakalorz, K.| Przypis, Ł.| Tomczyk, M.M.| Książek, M.| Grzesik, R.| Kuźnik, N.2020Molecules10.3390/molecules25051257
A concept of the development of riverside embankment in the context of Cracow (a local centre)Majerska-Pałubicka, B.| Latusek, E.2020Buildings10.3390/buildings10030056
Differentiation of the level of sustainable development of energy markets in the european union countriesBluszcz, A.| Manowska, A.2020Energies10.3390/en13184882
GaMRed - Adaptive Filtering of High-Throughput Biological DataMarczyk, M.| Jaksik, R.| Polanski, A.| Polanska, J.2020IEEE/ACM Transactions on Computational Biology and Bioinformatics10.1109/TCBB.2018.2858825
Thermal resistance determination of Sm2Zr2O7 + 8YSZ composite type of TBCMoskal, G.| Jasik, A.| Mikuśkiewicz, M.| Jucha, S.2020Applied Surface Science10.1016/j.apsusc.2020.145998
Reducing energy consumption in production processes and parameters describing the quality of electrical energyLange, A.| Pasko, M.2020Przeglad Elektrotechniczny10.15199/48.2020.02.03
A framework of action for implementation of industry 4.0. an empirically based researchPollak, A.| Hilarowicz, A.| Walczak, M.| Gasiorek, D.2020Applied Sciences (Switzerland)10.3390/su12145789
Ferromagnetic core coil hysteresis modeling using fractional derivativesSowa, M.| Majka, Ł.2020Nonlinear Dynamics10.1007/s11071-020-05811-3
An energy consumption model for designing an AGV energy storage system with a PEMFC stackNiestrój, R.| Rogala, T.| Skarka, W.2020Energies10.3390/en13133435
Calorimetric investigation of the Li[sbnd]Pt systemTerlicka, S.| Dębski, A.| Saternus, M.| Fornalczyk, A.| Gąsior, W.2020Journal of Molecular Liquids10.1016/j.molliq.2020.113446
Issues of an improving the accuracy of energy carriers production forecasting in a computer-aided system for monitoring the operation of a gas-fired cogeneration plantŻymełka, P.| Szega, M.2020Energy10.1016/j.energy.2020.118431
A two-year evaluation of corrosion-induced damage to hot galvanized reinforcing steel B500SP in chloride contaminated concreteJaśniok, M.| Sozańska, M.| Kołodziej, J.| Chmiela, B.2020Materials10.3390/ma13153315
Analysis and Forecasting of the Primary Energy Consumption in Poland Using Deep LearningManowska, A.2020International Journal of Electrical and Computer Engineering Systems10.29227/IM-2020-01-77
Analysis of driver behaviour at roundabouts in tokyo and the tokyo surroundingsMacioszek, E.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-34069-8_17
Influence of Air Cooling on the Fatigue of a Polymer Composite Under Self-HeatingKatunin, A.| Wachla, D.2020Mechanics of Composite Materials10.1007/s11029-020-09863-9
The effect of cooling conditions on martensite transformation temperature and hardness of 15% cr chromium cast ironTupaj, M.| Orłowicz, A.W.| Trytek, A.| Mróz, M.| Wnuk, G.| Dolata, A.J.2020Materials10.3390/ma13122760
Biodegradable Surface Active D-Glucose Based Quaternary Ammonium Ionic Liquids in the Solventless Synthesis of ChloropreneErfurt, K.| Markiewicz, M.| Siewniak, A.| Lisicki, D.| Zalewski, M.| Stolte, S.| Chrobok, A.2020ACS Sustainable Chemistry and Engineering10.1021/acssuschemeng.0c03239
Steel production in poland with pessimistic forecasts in COVID-19 crisisGajdzik, B.2020Metalurgija-
The impact of the ventilation system on the methane release hazard and spontaneous combustion of coal in the area of exploitation—A case studyTutak, M.| Brodny, J.| Szurgacz, D.| Sobik, L.| Zhironkin, S.2020Energies10.3390/en13184891
Effect of laser cladding parameters on structure properties of cobalt-based coatingsPoloczek, T.| Kotarska, A.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/916/1/012085
Role of Let-7 Family miRNAs in Migration of Colorectal Cancer HCT 116 and Caco-2 Cells After Stimulation by the Adipokine Vaspin. Time-Lapse Live-Cell Microscopic ObservationsSkonieczna, M.| Hudy, D.| Bil, P.| Adamiec, M.| Stachowska, M.| Biernacki, K.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-29885-2_5
Hybrid pectin-based sorbents for cesium ion removalBok-Badura, J.| Jakóbik-Kolon, A.| Kazek-Kesik, A.| Karoń, K.2020Materials10.3390/ma13092160
Predictive Algorithms in Social Sciences – Problematic Internet Use ExampleProbierz, E.| Sikora, W.| Gałuszka, A.| Gałuszka, A.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_9
Effect of nitrided and nitrocarburised austenite on pitting and crevice corrosion resistance of 316lvm steel implantsKajzer, A.| Ceglarska, M.| Sura, N.| Kajzer, W.| Borowski, T.| Tarnowski, M.| Pilecki, Z.2020Materials10.3390/ma13235484
Low velocity impact response and tensile strength of epoxy composites with different reinforcing materialsSławski, S.| Szymiczek, M.| Kaczmarczyk, J.| Domin, J.| Świtoński, E.2020Materials10.3390/ma13143059
Ensemble machine learning approaches for webshell detection in Internet of things environmentsYong, B.| Wei, W.| Li, K.-C.| Shen, J.| Zhou, Q.| Wozniak, M.| Połap, D.| Damaševičius, R.2020Transactions on Emerging Telecommunications Technologies10.1002/ett.4085
Recommendation for the design of composite covers which protect the chassis of a rail vehicleJuzuń, M.| Cholewa, W.2020Vibrations in Physical Systems-
Microwave absorption by dextrin-magnetite nanocomposite in frequencies below 2.5 GHz: Role of magnetite content, shape and temperature on magneto-dielectric propertiesRadoń, A.| Łukowiec, D.| Włodarczyk, P.2020Materials and Design10.1016/j.matdes.2020.108860
SMART Computational Solutions for the Optimization of Selected Technology Processes as an Innovation and Progress in Improving Energy Efficiency of Smart Cities—A Case StudyGaska, K.| Generowicz, A.2020Energies10.3390/en13133338
Nanoparticles of quaternary ammonium polyethylenimine derivatives for application in dental materialsChrószcz, M.| Barszczewska-Rybarek, I.2020Polymers10.3390/polym12112551
Reversal ventilation as a method of fire hazard mitigation in the minesPach, G.| Różański, Z.| Wrona, P.| Niewiadomski, A.| Zapletal, P.| Zubíček, V.2020Energies10.3390/en13071755
Self-similar Markovian sourcesDomanski, A.| Domanska, J.| Filus, K.| Szyguła, J.| Czachórski, T.2020Applied Sciences (Switzerland)10.3390/app10113727
Surface modification of titanium 6-aluminum 7-niobium alloy with biodegradable polymer coatingsSzewczenko, J.| Kajzer, W.| Kajzer, A.| Basiaga, M.| Kaczmarek, M.| Antonowicz, M.| Jaworska, J.| Jelonek, K.| Marcinkowski, A.| Kasperczyk, J.2020Materialwissenschaft und Werkstofftechnik10.1002/mawe.201900226
Thermo-optical properties of porous silica thin films produced by sol-gel methodJaglarz, J.| Dulian, P.| Karasiński, P.2020Materials Chemistry and Physics10.1016/j.matchemphys.2019.122603
Effect of Mo addition on the chemical corrosion process of SiMo cast ironStawarz, M.| Nuckowski, P.M.2020Materials10.3390/ma13071745
Heart rate variability analysis on electrocardiograms, seismocardiograms and gyrocardiograms on healthy volunteersSieciński, S.| Kostka, P.S.| Tkacz, E.J.2020Sensors (Switzerland)10.3390/s20164522
Error sources in electronic fully-digital impedance bridgesOrtolano, M.| Marzano, M.| D'Elia, V.| Tran, N.T.M.| Rybski, R.| Kaczmarek, J.| Koziol, M.| Musiol, K.| Christensen, A.| Pokatilov, A.| Callegaro, L.| Kucera, J.| Power, O.2020CPEM Digest (Conference on Precision Electromagnetic Measurements)10.1109/CPEM49742.2020.9191813
Effect of Heat Treatment on the Characterizations of Functionally Graded Al/Al2Cu Fabricated by Horizontal Centrifugal CastingMehditabar, A.| Rahimi, G.H.| Krol, M.| Vahdat, S.E.2020International Journal of Metalcasting10.1007/s40962-019-00401-5
Synthesis method-dependent photothermal effects of colloidal solutions of platinum nanoparticles used in photothermal anticancer therapyDepciuch, J.| Stec, M.| Maximenko, A.| Drzymała, E.| Pawlyta, M.| Baran, J.| Parlinska-Wojtan, M.2020Applied Organometallic Chemistry10.1002/aoc.5401
Prognostic methodology of forecasts steel production for Poland until 2022Gajdzik, B.| Piątkowski, J.| Kliś, P.2020Metalurgija-
Circuits regulating superoxide and nitric oxide production and neutralization in different cell types: Expression of participating genes and changes induced by ionizing radiationBil, P.| Ciesielska, S.| Jaksik, R.| Rzeszowska-Wolny, J.2020Antioxidants10.3390/antiox9080701
Humidity dependent impedance characteristics of SbSeI nanowiresMistewicz, K.| Starczewska, A.| Jesionek, M.| Nowak, M.| Kozioł, M.| Stróż, D.2020Applied Surface Science10.1016/j.apsusc.2020.145859
Zinc salt recovery from electroplating industry wastes by electrodialysis enhanced with complex formationBabilas, D.| Dydo, P.2020Separation Science and Technology (Philadelphia)10.1080/01496395.2019.1664582
Simple selection procedure to distinguish between static and flexible loopsMitusińska, K.| Skalski, T.| Góra, A.2020International Journal of Molecular Sciences10.3390/ijms21072293
Analysis of the influence of soil moisture on the stability of a building based on a slopeŚlusarek, J.| Łupieżowiec, M.2020Engineering Failure Analysis10.1016/j.engfailanal.2020.104534
Numerical modelling of thermal insulation of reinforced concrete ceilings with complex cross-sectionsDrobiec, L.| Wyczółkowski, R.| Kisiołek, A.2020Applied Sciences (Switzerland)10.3390/APP10082642
Fundamental issues when creating an autonomous platform for a UWB navigation systemGrzechca, D.| Tokarz, K.| Hanzel, K.| Pokuciński, S.2020Control Engineering and Applied Informatics-
Modified distance transformation for image enhancement in NIR imaging of finger vein systemBernacki, K.| Moroń, T.| Popowicz, A.2020Sensors (Switzerland)10.3390/s20061644
Comparison of instance selection and construction methods with various classifiersBlachnik, M.| Kordos, M.2020Applied Sciences (Switzerland)10.3390/app10113933
NOx, CO and HC emissions and thermodynamic-energetic efficiency of an SI gas engine powered by gases simulated from biomass gasification under different H2 contentNadaleti, W.C.| Przybyla, G.2020International Journal of Hydrogen Energy10.1016/j.ijhydene.2020.05.193
Protein Construction-Based Data Partitioning Scheme for Alignment of Protein Macromolecular Structures through Distributed Querying in Federated DatabasesMrozek, D.| Kwiendacz, J.| Malysiak-Mrozek, B.2020IEEE Transactions on Nanobioscience10.1109/TNB.2019.2930494
Process safety in metallurgical producionKarkoszka, T.2020Metalurgija-
Application of deep eutectic solvents and ionic liquids in the extraction of catechins from teaBajkacz, S.| Adamek, J.| Sobska, A.2020Molecules10.3390/molecules25143216
Sorption of CO2 and CH4 on Raw and Calcined Halloysite-Structural and Pore Characterization StudyPajdak, A.| Skoczylas, N.| Szymanek, A.| Lutyński, M.| Sakiewicz, P.2020Materials10.3390/ma13040917
General boundary element method for dual-phase lag equationMajchrzak, E.2020Proceedings of the 6th European Conference on Computational Mechanics: Solids, Structures and Coupled Problems, ECCM 2018 and 7th European Conference on Computational Fluid Dynamics, ECFD 2018-
Numerical investigation of the fluid flow distribution for the hydrofluidisation food freezing methodStebel, M.| Smolka, J.| Palacz, M.| Adamczyk, W.| Piechnik, E.2020International Journal of Thermal Sciences10.1016/j.ijthermalsci.2020.106284
The influence of hybrid surface modification on the selected properties of cp titanium grade ii manufactured by selective laser meltingWoźniak, A.| Adamiak, M.| Chladek, G.| Bonek, M.| Walke, W.| Bialas, O.2020Materials10.3390/ma13122829
Assessment of the corrosion resistance, properties and the structure of TIG braze welded galvanised steel sheetsGórka, J.2020Archives of Metallurgy and Materials10.24425/amm.2019.131095
Remarkable Thermal Conductivity Enhancement in Carbon-Based Ionanofluids: Effect of Nanoparticle MorphologyJozwiak, B.| Dzido, G.| Zorebski, E.| Kolanowska, A.| Jedrysiak, R.| Dziadosz, J.| Libera, M.| Boncel, S.| Dzida, M.2020ACS Applied Materials and Interfaces10.1021/acsami.0c09752
Technique for IoT cyberattacks detection based on DNS traffic analysisBobrovnikova, K.| Lysenko, S.| Gaj, P.| Martynyuk, V.| Denysiuk, D.2020CEUR Workshop Proceedings-
Analysis of the Influence of Socio-Economic Factors on the Volume of Railway Passenger Transport in Łódź RegionKamiński, W.| Sładkowski, A.2020Lecture Notes in Networks and Systems10.1007/978-3-030-44610-9_23
Microstructure and properties of the copper alloyed with Ag and Ti powders using fiber laserKrupiński, M.| Smolarczyk, P.E.| Bonek, M.2020Materials10.3390/ma13112430
The problem of the equivalent time to start the internal frost resistance test on self-compacting concrete with supplementary cementitious materialsŁaźniewska-Piekarczyk, B.| Piekarczyk, A.2020Journal of Building Engineering10.1016/j.jobe.2020.101503
Response time of the queue with the dropping functionChydzinski, A.| Adamczyk, B.2020Applied Mathematics and Computation10.1016/j.amc.2020.125164
Influence of temperature on the composition and calorific value of gases produced during the pyrolysis of waste pharmaceutical blistersKlejnowska, K.| Pikoń, K.| Ścierski, W.| Skutil, K.| Bogacka, M.2020Applied Sciences (Switzerland)10.3390/app10030737
Performance evaluation for ranking-based discretisationBaron, G.| Stanczyk, U.2020Procedia Computer Science10.1016/j.procs.2020.09.064
Low-Cost Autonomous UAV-Based Solutions to Package Delivery LogisticsGrzybowski, J.| Latos, K.| Czyba, R.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_42
Modifications and improvements to the collector metal method using an mhd pump for recovering platinum from used car catalystsSaternus, M.| Fornalczyk, A.| Gąsior, W.| Dębski, A.| Terlicka, S.2020Catalysts10.3390/catal10080880
The impact of the application of thin emulsion mat microsurfacing on the level of noise in the environmentNowoświat, A.| Sorociak, W.| Żuchowski, R.2020Construction and Building Materials10.1016/j.conbuildmat.2020.120626
Trends and forecasts of steel intensity in Poland on the based apparent crude steel use until 2022Gajdzik2020Metalurgija-
The influence of the process parameters on the microstructure and properties SLM processed 316 L stainless steelWoźniak, A.| Adamiak, M.| Chladek, G.| Kasperski, J.2020Archives of Metallurgy and Materials10.24425/amm.2019.131098
Comparison of Energy Consumption of Short and Long City Buses in Terms of Assessing the Needs for e-MobilityBurdzik, R.| Konieczny, Ł.| Jaworski, R.| Laskowski, D.| Polak, R.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-27687-4_8
Analysis of risk assessment in a municipal wastewater treatment plant located in upper SilesiaŁój-Pilch, M.| Zakrzewska, A.2020Water (Switzerland)10.3390/w12010023
Inaccuracies Revealed During the Analysis of Propagation of Measurement Uncertainty Through a Closed-Loop Fractional-Order Control SystemWiora, J.| Wiora, A.2020Lecture Notes in Electrical Engineering10.1007/978-3-030-17344-9_16
A review on current status of capacity control techniques for two-phase ejectorsGullo, P.| Kærn, M.R.| Haida, M.| Smolka, J.| Elbel, S.2020International Journal of Refrigeration10.1016/j.ijrefrig.2020.07.014
General boundary element method for the dual-phase lag equations describing the heating of two-layered thin metal filmsMajchrzak, E.2020Advanced Structured Materials10.1007/978-3-030-20801-1_20
Combining ?-similar Fuzzy Rules for Efficient Classification of Cardiotocographic SignalsJezewski, M.| Czabanski, R.| Leski, J.M.| Matonia, A.| Martinek, R.2020Proceedings of 27th International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2020-
Effect of carbon fillers on the wear resistance of pa6 thermoplastic compositesMyalski, J.| Godzierz, M.| Olesik, P.2020Polymers10.3390/polym12102264
Microstructure-properties relationship and mechanical stability of retained austenite in thermomechanically processed medium-C TRIP steel at different deformation temperaturesSkowronek, A.| Kozłowska, A.| Grajcar, A.| Morawiec, M.2020Archives of Metallurgy and Materials10.24425/amm.2020.132842
The concept of rules and recommendations for riding shared and private e-scooters in the road network in the light of global problemsTuroń, K.| Czech, P.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-34069-8_21
Notes on a new structure of active noise control systemsFigwer, J.| Michalczyk, M.I.2020Applied Sciences (Switzerland)10.3390/app10144705
Natural gas liquefaction using the high-pressure potential in the gas transmission systemPajączek, K.| Kostowski, W.| Stanek, W.2020Energy10.1016/j.energy.2020.117726
Numerical and experimental analysis of balloon angioplasty impact on flow hemodynamics improvementTomaszewski, M.| Sybilski, K.| Małachowski, J.| Wolański, W.| Buszman, P.P.2020Acta of Bioengineering and Biomechanics10.37190/ABB-01660-2020-03
Thermodynamic analysis and optimization of an oxy-combustion combined cycle power plant based on a membrane reactor equipped with a high-temperature ion transport membrane ITMKotowicz, J.| Job, M.| Brzęczek, M.2020Energy10.1016/j.energy.2020.117912
Effect of photooxidation on nanofiltration membrane fouling duringwastewater treatment from the confectionery industryMarszałek, A.| Puszczało, E.2020Water (Switzerland)10.3390/w12030793
Assessment of existing bond models for externally bonded SRP compositesKrzywoń, R.2020Applied Sciences (Switzerland)10.3390/app10238593
Analysis on the possibility of eliminating interference from paraseismic vibration signals induced by the detonation of explosive materialsPyra, J.| Kłaczyński, M.| Burdzik, R.2020Sensors (Switzerland)10.3390/s20216401
DDTree: A hybrid deep learning model for real-timewaterway depth prediction and smart navigationYang, F.| Qiao, Y.| Wei, W.| Wang, X.| Wan, D.| Damaševičius, R.| Woźniak, M.2020Applied Sciences (Switzerland)10.3390/APP10082770
Solid particle erosion of laser surface melted ductile cast ironKotarska, A.| Janicki, D.| Górka, J.| Poloczek, T.2020Archives of Foundry Engineering10.24425/afe.2020.133338
Micromagnetic simulations of chaotic ferromagnetic nanofiber networksBlachowicz, T.| Döpke, C.| Ehrmann, A.2020Nanomaterials10.3390/nano10040738
Selected aspects of photovoltaic power station operation in the power systemLange, A.| Pasko, M.2020Przeglad Elektrotechniczny10.15199/48.2020.05.05
Numerical verification of tests on the influence of the imposed thermal cycles on the structure and properties of the S700MC heat-affected zoneKik, T.| Górka, J.| Kotarska, A.| Poloczek, T.2020Metals10.3390/met10070974
Wavelet decomposition in analysis of impact of virtual reality head mounted display systems on postural stabilityWodarski, P.| Jurkojć, J.| Gzik, M.2020Sensors (Switzerland)10.3390/s20247138
Correlation between microstructure and chemical composition of zinc oxide gas sensor layers and their gas-sensitive properties in chlorine atmosphereFiedot-Toboła, M.| Suchorska-Woźniak, P.| Startek, K.| Rac-Rumijowska, O.| Szukiewicz, R.| Kwoka, M.| Teterycz, H.2020Sensors (Switzerland)10.3390/s20236951
Asymmetric hysteresis loops in co thin filmsEhrmann, A.| Blachowicz, T.2020Condensed Matter10.3390/condmat5040071
Analysis and testing of a suitable compatible electrode’s material for continuous measurement of glucose concentrationSlaninova, N.| Fiedorova, K.| Selamat, A.| Danisova, K.| Kubicek, J.| Tkacz, E.| Augustynek, M.2020Sensors (Switzerland)10.3390/s20133666
Gait kinematics index, global symmetry index and gait deviations profile: Concept of a new comprehensive method of gait pathology evaluationJochymczyk-Woźniak, K.| Nowakowska-Lipiec, K.| Zadoń, H.| Wolny, S.| Gzik, M.| Gorwa, J.| Michnik, R.2020Acta of Bioengineering and Biomechanics10.37190/ABB-01608-2020-03
Influence of surface modification of Ti6Al7Nb alloy on adhesion of poly (lactide-co-glycolide) coating (PLGA)Szewczenko, J.| Kajzer, W.| Kajzer, A.| Basiaga, M.| Kaczmarek, M.| Major, R.| Jaworska, J.| Jelonek, K.| Karpeta-Jarząbek, P.| Jaworska-Kik, M.| Kasperczyk, J.2020Colloids and Surfaces B: Biointerfaces10.1016/j.colsurfb.2020.111280
Eco-city: Model concept for transforming brownfield into modern urban districtKarwalska, R.| Mazur-Belzyt, K.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/4/042015
Personality traits and motivation as factors associated with symptoms of problematic binge-watchingStarosta, J.| Izydorczyk, B.| Dobrowolska, M.2020Applied Sciences (Switzerland)10.3390/su12145810
Selection of Methods for Intuitive, Haptic Control of the Underwater Vehicle’s ManipulatorGrzejszczak, T.| Babiarz, A.| Bieda, R.| Jaskot, K.| Kozyra, A.| Ściegienka, P.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_43
Experimental testing of the performance of packet dropping schemesBarczyk, M.| Chydzinski, A.2020Proceedings - IEEE Symposium on Computers and Communications10.1109/ISCC50000.2020.9219624
Computational investigation of partial admission effects on the flow field of a tesla turbine for ORC applicationsPacini, L.| Ciappi, L.| Talluri, L.| Fiaschi, D.| Manfrida, G.| Smolka, J.2020Energy10.1016/j.energy.2020.118687
Accuracy of real-time location system (RTLS) for manufacturing systemsMikoda, M.| Kalinowski, K.| Ćwikła, G.| Grabowik, C.| Foit, K.2020International Journal of Modern Manufacturing Technologies-
Special Section on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2019)Stanek, W.2020Journal of Energy Resources Technology, Transactions of the ASME10.1115/1.4048129
Investigating the economic efficiency of waste collection and transportation - Case study for urban and rural municipalities in PolandWala, M.| Nowakowski, P.2020Transport Problems10.21307/TP-2020-023
Methodology of preparation to manufacture oriented on geometrically and technologically similar elementsRząsiński, R.2020International Journal of Modern Manufacturing Technologies-
Biological Models’ Parameter Estimation Based on Discrete Measurements and Adjoint Sensitivity AnalysisFujarewicz, K.| Łakomiec, K.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_48
Technological properties of thermo-insulating moulding sands with organic binderStec, K.| Cholewa, M.| Kozakiewicz, Ł.2020Archives of Foundry Engineering10.24425/afe.2020.131311
The Experimental Method of Determining the Forces Operating During the Abrasive Waterjet Cutting Process – A Mathematical Model of the Jet Deviation AngleWala, T.| Lis, K.2020Lecture Notes in Mechanical Engineering10.1007/978-3-030-49910-5_21
On the use of textile materials in roboticsPyka, W.| Jedrzejowski, M.| Chudy, M.| Krafczyk, W.| Tokarczyk, O.| Dziezok, M.| Bzymek, A.| Bysko, S.| Blachowicz, T.| Ehrmann, A.2020Journal of Engineered Fibers and Fabrics10.1177/1558925020910725
Continuous-Time Approach to Discrete-Time PID Control for UPS Inverters - A Case StudyBłachuta, M.| Rymarski, Z.| Bieda, R.| Bernacki, K.| Grygiel, R.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-41964-6_15
Tracking of dynamic gesture fingertips position in video sequenceGrzejszczak, T.| Molle, R.| Roth, R.2020Archives of Control Sciences10.24425/acs.2020.132587
Head-Based Text Entry Methods for Motor-Impaired PeopleDobosz, K.| Popanda, D.| Sawko, A.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_1
PrefacePaszek, S.| Boboń, A.| Berhausen, S.| Majka, Ł.| Nocoń, A.| Pruski, P.2020Lecture Notes in Electrical Engineering10.1021/bk-1986-0318.pr001
Influence of Air Humidity on Transonic Flows with Weak Shock WavesDykas, S.| Majkut, M.| Smołka, K.2020Journal of Thermal Science10.1007/s11630-019-1182-9
Developing a Method for Automated Creation of Interlocking Tables for Railway Traffic Control SystemsJurczak, M.| Młyńczak, J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-27687-4_20
Physical and numerical modeling of the manufacturing process of a complex shape pressed element from a nickel superalloyHyrcza-Michalska, M.2020Archives of Metallurgy and Materials10.24425/amm.2019.131117
Major Influencing Factors of Decision About Alternative Technical Means in Selected Aviation ServicesPiechoczek, E.| Hawryluk, A.2020Lecture Notes in Mechanical Engineering10.1007/978-981-15-1910-9_48
Multichannel Speech Acquisition and Analysis for Computer-Aided Sigmatism Diagnosis in ChildrenKrecichwost, M.| Miodonska, Z.| Trzaskalik, J.| Badura, P.2020IEEE Access10.1109/ACCESS.2020.2996413
Using the Kalman filter for purposes of road condition assessmentStaniek, M.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-35543-2_20
GrFCM – Granular Clustering of Granular DataSiminski, K.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_11
Field and CFD Study of Fuel Distribution in Pulverized Fuel (PF) BoilersCiukaj, S.| Hernik, B.2020Journal of Thermal Science10.1007/s11630-020-1199-0
Occurrence of linear discontinuous deformations in Upper Silesia (Poland) in conditions of intensive mining extraction-case studyStrzałkowski, P.| Szafulera, K.2020Energies10.3390/en13081897
Analysis of synchronous motor with the periodically variable load using small signal oscillation methodHyla, M.2020Przeglad Elektrotechniczny10.15199/48.2020.04.38
Constitutive material model for steel powder compaction using multi-scale approachKaras, L.| Matula, G.2020Euro PM 2018 Congress and Exhibition-
AHSS steel welding with micro-jet cooling in mobile platformsWęgrzyn, T.| Szczucka-Lasota, B.| Piwnik, J.| Jurek, A.2020Transport Problems10.21307/TP-2020-012
Finite element analysis of adolescent mandible fracture occurring during accidentsZmudzki, J.| Chladek, G.| Panek, K.| Lipiński, P.2020Archives of Metallurgy and Materials10.24425/amm.2019.131097
A new nondeterministic method for optimal selection of master degrees of freedom for dynamic condensation based on evolutionary optimizationMucha, W.2020Journal of Theoretical and Applied Mechanics (Poland)10.15632/jtam-pl/118823
Thermal comfort and energy use with local heatersKaczmarczyk, J.| Ferdyn-Grygierek, J.2020Energies10.3390/en13112912
Multi-domain, Advisory Computing System in Continuous Manufacturing ProcessesNiemiec, K.| Krenczyk, D.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-20055-8_36
Multifactorial fuzzy logic distance correction for uwb positioning systemHanzel, K.| Grzechca, D.| Tomczyk, M.| Marciniak, A.2020Journal of Communications10.12720/jcm.15.5.447-454
Quantitative X-ray diffraction analysis of Zn-Al based alloysGogola, P.| Gabalcová, Z.| Suchánek, H.| Babinec, M.| Bonek, M.| Kusý, M.2020Archives of Metallurgy and Materials10.24425/amm.2020.132844
Finite element study on the shear capacity of traditional joints between walls made of AAC masonry unitsKozłowski, M.| Galman, I.| Jasiński, R.2020Materials10.3390/ma13184035
Influence of mechanical-alloying parameters on the structure and properties of Cu47Ti34Zr11Ni8Nowosielski, R.| Guwer, A.| Matus, K.2020Materiali in Tehnologije10.17222/MIT.2015.345
Effect of carbon content on the microstructure and properties of Ti-6Al-4V alloySzkliniarz, A.| Szkliniarz, W.2020Archives of Metallurgy and Materials10.24425/amm.2020.133239
Assessment of the pallet unit load stability by simulation methodsMatyja, T.2020Communications - Scientific Letters of the University of Zilina10.26552/com.C.2020.3.19-28
Bacterial surface colonization of sputter-coated platinum filmsCzerwińska-Glówka, D.| Przystaś, W.| Zablocka-Godlewska, E.| Student, S.| Cwalina, B.| Łapkowski, M.| Krukiewicz, K.2020Materials10.3390/ma13122674
Steel relieving constructions in mining areas as temporary or permanent railway bridgesBętkowski, P.2020Transport Problems10.21307/TP-2020-024
New challenges for ideation in the context of systems engineeringSkarka, W.| Jezierska-Krupa, K.| Skoberla, R.2020Systems Engineering in Research and Industrial Practice: Foundations, Developments and Challenges10.1007/978-3-030-33312-6_3
Scattering phenomena in porous sol-gel-derived silica filmsJaglarz, J.| Dulian, P.| Karasiński, P.| Winkowski, P.2020Coatings10.3390/COATINGS10060509
Electrochemical polishing of austenitic stainless steelsŁyczkowska-Widłak, E.| Lochyński, P.| Nawrat, G.2020Materials10.3390/ma13112557
Multi-modal U-Nets with boundary loss and pre-training for brain tumor segmentationRibalta Lorenzo, P.| Marcinkiewicz, M.| Nalepa, J.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-46643-5_13
The Gaseous Fuels Towards Contemporary Economic and Ecological ChallengesFlekiewicz, M.| Kubica, G.| Fabiś, P.2020Lecture Notes in Networks and Systems10.1007/978-3-030-42323-0_2
On the Pb-Pd system. Calorimetric studies and ab-initio aided thermodynamic calculationsGierlotka, W.| Dębski, A.| Terlicka, S.| Saternus, M.| Fornalczyk, A.| Gąsior, W.2020Journal of Molecular Liquids10.1016/j.molliq.2020.113806
8-Hydroxyquinoline glycoconjugates containing sulfur at the sugar anomeric position—synthesis and preliminary evaluation of their cytotoxicityKrawczyk, M.| Pastuch-Gawołek, G.| Hadasik, A.| Erfurt, K.2020Molecules10.3390/molecules25184174
Study of persistent luminescence and thermoluminescence in SrSi2N2O2:Eu2+,M3+(M = Ce, Dy, and Nd)Majewska, N.| Leśniewski, T.| Mahlik, S.| Grinberg, M.| Chruścińska, A.| Michalik, D.| Sopicka-Lizer, M.2020Physical Chemistry Chemical Physics10.1039/d0cp01739f
Accessibility of mobile card gamesDobosz, K.| Adamczyk, A.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-58796-3_26
Design and selective laser melting manufacturing of tpe extrusion dieKról, M.| Musiorski, M.| Pagac, M.2020Solid State Phenomena10.4028/www.scientific.net/SSP.308.51
Postural symmetry evaluation using phase approximations of the follow-up CoP trajectoriesŁukaszewicz, T.| Kidoń, Z.| Kania, D.| Pethe-Kania, K.2020Computer Methods in Biomechanics and Biomedical Engineering10.1080/10255842.2020.1810241
Numerical approaches for moist air condensing flows modelling in the transonic regimeWiśniewski, P.| Dykas, S.| Yamamoto, S.| Pritz, B.2020International Journal of Heat and Mass Transfer10.1016/j.ijheatmasstransfer.2020.120392
Descriptive and Inferential StatisticsStapor, K.2020Intelligent Systems Reference Library10.1007/978-3-030-45799-0_2
Oxidation of long-chain α-olefins using environmentally-friendly oxidantsPeckh, K.| Lisicki, D.| Talik, G.| Orlińska, B.2020Materials10.3390/ma13204545
Analysis of the main coal mining restructuring policy objectives in the light of polish mining companies' ability to changeRybak, A.| Rybak, A.2020Energies10.3390/en13123281
The Main Assumptions for Functional-Operational Configuration of Tasks in Transport ProjectsKaroń, G.| Mikulski, J.2020Communications in Computer and Information Science10.1007/978-3-030-59270-7_5
Microstructural, mechanical and tribological properties of finely grained Al2O3 coatings obtained by SPS and S-HVOF methodsMichalak, M.| Latka, L.| Sokolowski, P.| Toma, F.-L.| Myalska, H.| Denoirjean, A.| Ageorges, H.2020Surface and Coatings Technology10.1016/j.surfcoat.2020.126463
Diphenyl functional porphyrins and their metal complexes as visible-light photoinitiators for free-radical, cationic and thiol-ene polymerizationsMarcille, H.| Malval, J.-P.| Presset, M.| Bogliotti, N.| Blacha-Grzechnik, A.| Brezová, V.| Yagci, Y.| Versace, D.-L.2020Polymer Chemistry10.1039/d0py00468e
Modeling of mechanical properties of dissimilar joints using the FEM approachGwiazda, A.| Topolska, S.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/916/1/012044
Asphalt concrete produced from rejuvenated reclaimed asphalt pavement (RAP)Sorociak, W.| Grzesik, B.| Bzówka, J.| Mieczkowski, P.2020Archives of Civil Engineering10.24425/ace.2020.131812
Coarse-Grained vs. Fine-Grained Lithuanian Dependency ParsingKapočiūtė-Dzikienė, J.| Damaševičius, R.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-51965-0_39
The Use of Multidimensional Exploration Techniques to Assess the Similarity of the Development Level of Energy MarketsBluszcz, A.| Ranosz, R.2020International Journal of Electrical and Computer Engineering Systems10.29227/IM-2020-01-74
Configuration and programming of the fanuc irvision vision system for applications in the dynamic environment of manipulated elementsMarny, M.| Hetmanczyk, M.P.2020International Journal of Modern Manufacturing Technologies-
Reduct-based ranking of attributesZielosko, B.| Stanczyk, U.2020Procedia Computer Science10.1016/j.procs.2020.09.315
On Determination of Complex Ratio of AC Voltages in a Simultaneously Sampled Two-Channel Data Acquisition SystemAugustyn, J.| Kampik, M.| Musiol, K.2020CPEM Digest (Conference on Precision Electromagnetic Measurements)10.1109/CPEM49742.2020.9191885
A cracking model for reinforced concrete cover, taking account of the accumulation of corrosion products in the itz layer, and including computational and experimental verificationKrykowski, T.| Jaśniok, T.| Recha, F.| Karolak, M.2020Materials10.3390/ma13235375
Prediction of streamflow based on dynamic sliding window lstmDong, L.| Fang, D.| Wang, X.| Wei, W.| Damaševičius, R.| Scherer, R.| Woźniak, M.2020Water (Switzerland)10.3390/w12113032
Predictive maintenance scheduling with failure rate described by truncated normal distributionPaprocka, I.| Kempa, W.M.| Ćwikła, G.2020Sensors (Switzerland)10.3390/s20236787
Maximisation of buckling resistance in structural members made of circular hollow sectionsWalentyński, R.| Siwek, M.2020Computer Assisted Methods in Engineering and Science10.24423/cames.283
Pearson correlation-based feature selection for document classification using balanced trainingNasir, I.M.| Khan, M.A.| Yasmin, M.| Shah, J.H.| Gabryel, M.| Scherer, R.| Damaševičius, R.2020Sensors (Switzerland)10.3390/s20236793
The importance of SiC in the process of melting ductile iron with a variable content of charge materialsJanerka, K.| Kostrzewski, Ł.| Stawarz, M.| Jezierski, J.2020Materials10.3390/ma13051231
Electrostatic and magnetostatic levitations of ball – forces, stability and oscillations frequenciesSpałek, D.2020IET Science, Measurement and Technology10.1049/iet-smt.2020.0014
Processing and structure of hdpe/glassy carbon composite suitable for 3D printingOlesik, P.| Kozioł, M.| Jała, J.2020Composites Theory and Practice-
Glycoconjugation of Betulin Derivatives Using Copper-Catalyzed 1,3-Dipolar Azido-Alkyne Cycloaddition Reaction and a Preliminary Assay of Cytotoxicity of the Obtained CompoundsGrymel, M.| Pastuch-Gawołek, G.| Lalik, A.| Zawojak, M.| Boczek, S.| Krawczyk, M.| Erfurt, K.2020Molecules (Basel, Switzerland)10.3390/molecules25246019
The influence of the slm process parameters optimization on the density and microstructure of ti6al4v alloyWoźniak, A.| Adamiak, M.2020International Journal of Modern Manufacturing Technologies-
Designing for pupils with the autism spectrum disorder, case study of the Autism Centre in Muroor, Abu DhabiMentel, K.| Bujniewicz, Z.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032003
Developing a test site for testing the suspension of vehicles with omnidirectional wheelsDuda, S.| Dudek, O.| Gembalczyk, G.| Machoczek, T.2020Vibrations in Physical Systems10.21008/j.0860-6897.2020.3.04
Extending the algorithms of design procedures for new structures and urban spaces by research using architectural layout models and social surveys based on the example of new investment projects of the city of ZabrzePocisk-Dobrowolski, J.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032015
Gradient Boosting and Deep Learning Models Approach to Forecasting Promotions Efficiency in FMCG RetailHenzel, J.| Sikora, M.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-61534-5_30
Development of bath chemical composition for batch hot-dip galvanizing-A reviewKania, H.| Mendala, J.| Kozuba, J.| Saternus, M.2020Materials10.3390/ma13184168
The stress analysis of the milling machine structureLysek, K.| Gwiazda, A.| Herbus, K.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/916/1/012056
Some results on linear nabla Riemann-Liouville fractional difference equationsThe Anh, P.| Babiarz, A.| Czornik, A.| Niezabitowski, M.| Siegmund, S.2020Mathematical Methods in the Applied Sciences10.1002/mma.6337
Development of the Multi-platform Human-Computer Interaction for Mobile and Wearable DevicesBier, A.| Sroczyński, Z.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-19501-4_6
Concurrent Planning and Scheduling of Heterogeneous Production System. Case StudySkołud, B.| Szopa, A.| Kalinowski, K.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-20055-8_35
A Comparison Analysis of the Computer Simulation Results of a Real Production System: Production System Modelling with FlexSim and Plant Simulation SoftwareGrabowik, C.| Ćwikła, G.| Kalinowski, K.| Kuc, M.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-20055-8_33
Immersive Virtual Reality for Assisting in Inclusive Architectural DesignLach, E.| Benek, I.| Zalewski, K.| Skurowski, P.| Kocur, A.| Kotula, A.| Macura, M.| Pamuła, Z.| Stankiewicz, M.| Wyrobek, T.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_3
Stress corrosion of haz of heterogeneous welding joints of duplex and austenitic steelsTopolska, S.| Gwiazda, A.2020International Journal of Modern Manufacturing Technologies-
Surface hardening of almg5si2mn alloy through multi-axis compression using max strainSnopiński, P.| Tański, T.| Borek, W.2020Solid State Phenomena10.4028/www.scientific.net/SSP.308.171
Physical and Chemical Characterization of the Magnesium Surface Modified by Plasma Electrolytic Oxidation - Influence of Immersion in Simulated Body FluidOleshko, O.| Kornienko, V.| Kyrylenko, S.| Simka, W.| Husak, Y.| Oleshko, T.| Dryhval, B.| Dudko, J.| Pogorielov, M.2020Proceedings of the 2020 IEEE 10th International Conference on Nanomaterials: Applications and Properties10.1109/NAP51477.2020.9309586
Study of characteristics of road traffic streams in pedestrian crossing-affected areasCeliński, I.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-34069-8_10
Recovery of metals from printed circuit boards by means of electrostatic separationFranke, D.| Suponik, T.| Nuckowski, P.M.| Golombek, K.| Hyra, K.2020Management Systems in Production Engineering10.2478/mspe-2020-0031
Sustainable method for the synthesis of alternative bis(2-ethylhexyl) terephthalate plasticizer in the presence of protic ionic liquidsGrymel, A.| Latos, P.| Matuszek, K.| Erfurt, K.| Barteczko, N.| Pankalla, E.| Chrobok, A.2020Catalysts10.3390/catal10040457
Adaptation of 120 MW class generators for synchronous compensator operationKrok, R.2020Przeglad Elektrotechniczny10.15199/48.2020.03.08
The influence of Ag on the microstructure and properties of Cu-Ni-Si alloysKrupińska, B.| Borek, W.| Krupiński, M.| Karkoszka, T.2020Materials10.3390/ma13153416
Surface properties of SnO2 nanolayers prepared by spin-coating and thermal oxidationKwoka, M.| Lyson-Sypien, B.| Comini, E.| Krzywiecki, M.| Waczynski, K.| Szuber, J.2020Nanotechnology10.1088/1361-6528/ab7586
On the design of dual-polarised linear antenna arrays with enhanced port-to-port isolationWójcik, D.| Surma, M.| Noga, A.| Magnuski, M.2020Sensors (Switzerland)10.3390/s20216105
Coatings for protection against the wear of machine parts made by welding and thermal spraying methodsSzymański, K.| Jonda, E.| Szymański, W.2020Ochrona Przed Korozja-
Hiding information in a picture file: A system model with experimental designSiłka, J.2020CEUR Workshop Proceedings-
Image classification with feed-forward neural networksMeller, B.| Matula, K.| Chłąd, P.2020CEUR Workshop Proceedings-
Chassis geometry optimization based on 3D-scans of the ergonomic driving positionZur, P.| Baier, A.| Kołodziej, A.2020International Journal of Mechanical Engineering and Robotics Research10.18178/ijmerr.9.8.1213-1218
Oxygen Functional Groups on MWCNT Surface as Critical Factor Boosting T2 Relaxation Rate of Water Protons: Towards Improved CNT-Based Contrast AgentsTomczyk, M.M.| Boncel, S.| Herman, A.| Krawczyk, T.| Jakóbik-Kolon, A.| Pawlyta, M.| Krzywiecki, M.| Chrobak, A.| Minoshima, M.| Sugihara, F.| Kikuchi, K.| Kuźnik, N.2020International journal of nanomedicine10.2147/IJN.S257230
Algorithm based on reward and punishment technique for checker playerWinnicka, A.2020CEUR Workshop Proceedings-
Petri Networks for Mechanized Longwall System SimulationHeyduk, A.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_27
Technical project management for meeting high quality requirements of machined partsMonica, Z.| Czuprynski, A.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/916/1/012069
Mechanical hazards to stack coatingsWojnar, W.| Pronobis, M.| Nawrat, K.2020Engineering Failure Analysis10.1016/j.engfailanal.2020.104632
Click chemistry as a tool in biosensing systems for sensitive copper detectionTarnowska, M.| Krawczyk, T.2020Biosensors and Bioelectronics10.1016/j.bios.2020.112614
Clustering with ϵ-Hyperballs Based Simplification of Fuzzy Rules to Support the Assessment of Fetal StateCzabanski, R.| Jezewski, M.| Leski, J.M.| Kupka, T.| Martinek, R.2020Proceedings - IEEE 20th International Conference on Bioinformatics and Bioengineering, BIBE 202010.1109/BIBE50027.2020.00065
A New Solution for an Electrochemical Modification of Titanium SurfaceKyrylenko, S.| Oleshko1, O.| Warchol, F.| Husak, Y.| Basiaga, M.| Kazek-Kesik, A.| Dercz, G.| Pogorielov, M.| Simka, W.2020Journal of Nano- and Electronic Physics10.21272/jnep.12(6).06038
Morphology and structure characterization of crystalline sno2 1d nanostructuresMatysiak, W.| Tański, T.| Smok, W.2020Photonics Letters of Poland10.4302/plp.v12i3.1019
The problem of positioning repeatability of linear pneumatic drives with discrete proximity sensorsFoit, K.| Ćwikła, G.| Grabowik, C.| Kalinowski, K.2020International Journal of Modern Manufacturing Technologies-
Lightning impulse withstand tests for optical fiber current sensor with external conversionBarczak, K.| Duda, D.2020Proceedings of SPIE - The International Society for Optical Engineering10.1117/12.2566326
Mesoporous silica-supported ionic liquids as catalysts for styrene carbonate synthesis from CO2Siewniak, A.| Forajter, A.| Szymańska, K.2020Catalysts10.3390/catal10111363
Analysis of magnetic field distribution in a transverse-flux linear motor with superconducting windingsHabelok, K.| Lasek, P.| Stepien, M.2020International Journal of Applied Electromagnetics and Mechanics10.3233/JAE-209524
Experimental and numerical analysis of heat transfer within cavity working under highly non-stationary flow conditionsRulik, S.| Wróblewski, W.| Majkut, M.| Strozik, M.| Rusin, K.2020Energy10.1016/j.energy.2019.116303
Analysis of resistance to accelerated aging of the top layer of small-sized concrete elements. A case studyBochen, J.| Ślusarek, J.2020Construction and Building Materials10.1016/j.conbuildmat.2020.120211
Study of light-activated regioregular poly(3-hexyltiophene) photoconductive polymer sensing properties in nerve agent simulant (DMMP) detectionPowroznik, P.| Jakubik, W.| Stolarczyk, A.| Kazmierczak-Balata, A.| Wrotniak, J.| Jarosz, T.2020Sensors (Switzerland)10.3390/s20020491
Identification of oxidation process of TiALN coatings versus heat resistant aerospace alloys based on diffusion couples and tool wear testsGrzesik, W.| Małecka, J.| Kwaśny, W.2020CIRP Annals10.1016/j.cirp.2020.04.024
Development of integrated photonics based on SiO2:TiO2 sol-gel derived waveguide layers: State of the art, perspectives, prospective applicationsKarasiński, P.| Tyszkiewicz, C.| Piramidowicz, R.| Kaźmierczak, A.2020Proceedings of SPIE - The International Society for Optical Engineering10.1117/12.2559059
Communication platforms: New positions and appointmentDosenko, A.| Iuksel, G.| Synowiec, A.| Pohrebniak, I.| Shevchenko, V.2020International Journal of Management10.34218/IJM.11.3.2020.032
Autonomous guided vehicles for smart industries – the state-of-the-art and research challengesCupek, R.| Drewniak, M.| Fojcik, M.| Kyrkjebø, E.| Lin, J.C.-W.| Mrozek, D.| Øvsthus, K.| Ziebinski, A.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-50426-7_25
The studies on the qualities of tin coatingsOleksiak, B.| Kołtało, K.2020Metalurgija-
Art in the public space, different aspects of artistic activities in architectureZabawa-Krzypkowska, J.| Groń, K.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032090
Production Waste from Hard Coal Mining in the Light of Circular EconomyTobór-Osadnik, K.| Wyganowska, M.| Kowal, B.2020International Journal of Electrical and Computer Engineering Systems10.29227/IM-2020-01-78
Distance Learning in Technical Education on Example of Estonia and PolandVaimann, T.| Stepien, M.| Rassolkin, A.| Palu, I.20202020 11th International Conference on Electrical Power Drive Systems, ICEPDS 2020 - Proceedings10.1109/ICEPDS47235.2020.9249317
Laser-assisted copper oxidationMusztyfaga-Staszuk, M.| Gawlińska-Nęcek, K.| Janicki, D.| Panek, P.2020Archives of Metallurgy and Materials10.24425/amm.2020.132818
Reversibility of the Ex-Solution↔Redispersion Processes of Rhodium in Rh0.15Ce0.85O2-y Nanoparticles Deposited on Functionalized AluminaLedwa, K.A.| Kępiński, L.| Pawlyta, M.2020ChemNanoMat10.1002/cnma.202000062
Effect of ultrasonic-assisted preparation of powders on synthesis of rare earth zirconatesNiemiec, D.| Mikuśkiewicz, M.2020Archives of Metallurgy and Materials10.24425/amm.2020.131744
City space recycling: The example of brownfield redevelopmentSoltysik, M.| Mazur-Belzyt, K.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/4/042016
Power losses in the reactive power compensator built of capacitor banks and protective chokesPasko, M.| Adrikowski, T.| Bula, D.| Blaszczok, D.2020Przeglad Elektrotechniczny10.15199/48.2020.03.36
Application methods and selected properties of zinc flake coatingsOleksiak, B.| Kołtało, K.| Poloczek, R.2020Metalurgija-
On superlinear speedups of a parallel NFA induction algorithmJastrzb, T.2020Advances in Parallel Computing10.3233/APC200039
Monitoring the gait process during the rehabilitation of patients using computer vision techniques and UWB technologyGrzechca, D.| Ziebinski, A.| Komorowski, D.| Hanzel, K.| Pokucinski, S.| Klonowski, K.| Siwek, S.2020Lecture Notes in Business Information Processing10.1007/978-3-030-44322-1_31
Evolutionary identification of microstructure parameters in the thermoelastic porous materialDługosz, A.| Schlieter, T.2020Journal of Theoretical and Applied Mechanics (Poland)10.15632/jtam-pl/116802
Surface treatment of incrementally produced components in FFF (Fused Filament Fabrication) technologyMrówka, M.| Machoczek, T.| Szymiczek, M.| Gągol, P.| Duda, S.| Marcoll, Ł.2020Polimery/Polymers10.14314/POLIMERY.2020.1.7
Kalman Filter estimation of angular accelerationNalepa, B.| Gwiazda, A.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/916/1/012072
Use of econometric models for predicting the lifetime of steam pipelines in the power industryPiątkowski, J.| Gajdzik, B.| Mesjasz, A.2020Metalurgija-
Follow-Up Sequencing Algorithm for Car Sequencing Problem 4.0Bysko, S.| Krystek, J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-13273-6_15
3D mapping of the sprinkler activation timeWęgrzyński, W.| Krajewski, G.| Tofiło, P.| Jahn, W.| Król, A.| Król, M.2020Energies10.3390/en13061450
Editorial – CPOTE 2018 Energy SIStanek, W.| Kostowski, W.| Gładysz, P.2020Energy10.1016/j.energy.2019.116425
Support for pro-ecological solutions in smart cities with the use of travel databases – a case study based on a bike-sharing system in BudapestTuroń, K.| Sierpiński, G.| Tóth, J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-35543-2_18
Effect of modification on microstructure and properties of AZ91 magnesium alloyKiełbus, A.| Jarosz, R.| Gryc, A.2020Crystals10.3390/cryst10060536
Generalized energy and ecological characteristics of the process of co-firing coal with biomass in a steam boilerKozioł, J.| Czubala, J.| Kozioł, M.| Ziembicki, P.2020Energies10.3390/en13102634
A numerical study on fire development in a confined space leading to backdraft phenomenonKról, A.| Król, M.| Krawiec, S.2020Energies10.3390/en13071854
Highly luminescent 4H-1,2,4-triazole derivatives: Synthesis, molecular structure and photophysical propertiesOlesiejuk, M.| Kudelko, A.| Światkowski, M.2020Materials10.3390/ma13245627
Charging Stations for Electric Vehicles - Current Situation in PolandMacioszek, E.| Sierpiński, G.2020Communications in Computer and Information Science10.1007/978-3-030-59270-7_10
The origin of constant phase element in equivalent circuit of MIS (n) GaAs structuresDrewniak, Ł.| Kochowski, S.2020Journal of Materials Science: Materials in Electronics10.1007/s10854-020-04447-8
Classification of thyroid tumors based on mass spectrometry imaging of tissue microarrays; a single-pixel approachKurczyk, A.| Gawin, M.| Chekan, M.| Wilk, A.| Łakomiec, K.| Mrukwa, G.| Fratczak, K.| Polanska, J.| Fujarewicz, K.| Pietrowska, M.| Widlak, P.2020International Journal of Molecular Sciences10.3390/ijms21176289
Thermal stability of serely deformed AlMg3 sheetsHilšer, O.| Snopinski, P.| Rusz, S.| Tanski, T.| Maziarz, W.| Stan-Glowinska, K.| Greger, M.2020METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings10.37904/metal.2020.3491
Designing of slab-column structures due to additional loadsWieczorek, M.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/4/042056
Location of generating units most affecting the angular stability of the power system based on the analysis of instantaneous power waveformsPruski, P.| Paszek, S.2020Archives of Control Sciences10.24425/acs.2020.133500
Component-Based Simulation Tool for Virtual Commissioning of Control Systems for Heat Exchange and Distribution ProcessesFrątczak, M.| Nowak, P.| Kłopot, T.| Czeczot, J.| Bysko, S.| Bysko, S.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-40971-5_7
Comparisons of two approaches of pattern recognition for text detectionLis, E.| Kluger, R.2020CEUR Workshop Proceedings-
Structure of titanium grade 1 after laser alloying with fecr powderWiśniowski, M.| Tański, T.| Snopiński, P.2020Solid State Phenomena10.4028/www.scientific.net/SSP.308.157
Simulation Models of Generating Unit ElementsPaszek, S.| Boboń, A.| Berhausen, S.| Majka, Ł.| Nocoń, A.| Pruski, P.2020Lecture Notes in Electrical Engineering10.1007/978-3-030-37976-6_2
FIT2COMIn – Robust Clustering Algorithm for Incomplete DataSiminski, K.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_10
Hamming spaces and locally matrix algebrasBezushchak, O.| Oliynyk, B.2020Journal of Algebra and its Applications10.1142/S0219498821501474
Assessment of the impact of inaccuracy and variability of material and selected technological factors on physical and mechanical properties of fresh masonry mortars and plastersGolaszewska, M.| Golaszewski, J.| Cygan, G.| Bochen, J.2020Materials10.3390/ma13061382
Characterization of an integrated MOEMS scanning probe towards real-time Lissajous-based SS-OCT imaging for endoscopic applicationsGarcía-Ramírez, F.E.| Bargiel, S.| Gaiffe, O.| Tanguy, Q.A.A.| Struk, P.| Cote, J.-M.| Passilly, N.| Lutz, P.| Gorecki, C.| Xie, H.2020Optics InfoBase Conference Papers-
Method, Algorithm and Module of a Parameter Estimation Program for Mathematical Models of Synchronous Generator and Excitation SystemsPaszek, S.| Boboń, A.| Berhausen, S.| Majka, Ł.| Nocoń, A.| Pruski, P.2020Lecture Notes in Electrical Engineering10.1007/978-3-030-37976-6_4
Laser measurement system dedicated to the determination of rails deformation of a hybrid electromagnetic launcherDomin, J.2020International Journal of Applied Electromagnetics and Mechanics10.3233/JAE-209515
Infrared Distance Sensors for Autonomous Model of Truck with Semi-TrailerRzydzik, S.| Saltarski, A.| Rozinski, M.| Psiuk, K.20202020 6th International Conference on Mechatronics and Robotics Engineering, ICMRE 202010.1109/ICMRE49073.2020.9065091
Mobile System for Determining Geographical Coordinates for Needs of Air Support in Cases of GPS Signals LossJędrasiak, K.| Nawrat, A.| Recha, P.| Sobel, D.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-39445-5_63
Effectiveness of shear strengthening of walls made using aac blocks - laboratory test resultsKałuża, M.2020Archives of Civil Engineering10.24425/ace.2020.131794
Empirical Mode Decomposition Based Data Augmentation for Time Series Prediction Using NARX NetworkAbayomi-Alli, O.O.| Sidekerskienė, T.| Damaševičius, R.| Siłka, J.| Połap, D.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-61401-0_65
Influence of superficial strengthening with FRCM system on compressive strength of cracked AAC masonryDrobiec, L.| Mazur, W.| Jokiel, R.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/2/022050
Non-commercial air purifier-the effectiveness and safetyMainka, A.| Mucha, W.| Pastuszka, J.S.| Bragoszewska, E.| Janoszek, A.2020Buildings10.3390/BUILDINGS10060104
Application of local exhaust systems to reduce pollution concentration near the roadBiliaiev, M.| Pshinko, O.| Rusakova, T.| Biliaieva, V.| Sładkowski, A.2020Transport Problems10.21307/TP-2020-055
Evaluation of the influence of the percentage of copper content on the physical and chemical properties of the friction materialBorawski, A.| Tarasiuk, W.| Borawska, E.| Szczucka-Lasota, B.| Krzysztoforski, M.2020Transport Problems10.21307/TP-2020-045
Characterization of High-Temperature Superconducting TapesKubiczek, K.| Kampik, M.| Stepien, M.2020IEEE Transactions on Instrumentation and Measurement10.1109/TIM.2019.2929877
Outdoor climate parameters and heat energy consumption for the needs of heating the buildingNowoświat, A.| Pokorska-Silva, I.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032009
Electromagnetically excited torsional vibration to rock drilling supportTrawiński, T.| Szczygieł, M.| Tomas, A.2020International Journal of Applied Electromagnetics and Mechanics10.3233/JAE-209502
Environmental footprints of current and future electric battery charging and electric vehicles in PolandBurchart-Korol, D.| Folęga, P.2020Transport Problems10.21307/TP-2020-006
Determination of Polycyclic Aromatic Hydrocarbons in Waxes by High Performance Liquid Chromatography with Fluorimetric DetectionTomasz Krawczyk| Czechowicz, D.| Iłowska, J.2020Journal of Analytical Chemistry10.1134/S1061934820040073
Design Method for Multi-Coil Wireless Power Transfer SystemsFrania, K.| Kaczmarczyk, Z.| Bodzek, K.2020IEEE International Symposium on Industrial Electronics10.1109/ISIE45063.2020.9152538
Fuzzy intelligence in monitoring older adults with wearablesMrozek, D.| Milik, M.| Małysiak-Mrozek, B.| Tokarz, K.| Duszenko, A.| Kozielski, S.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-50426-7_22
Analysis of the thermal retrofitting potential of the external walls of podhale's historical timber buildings in the aspect of the non-deterioration of their technical conditionFedorczak-Cisak, M.| Radziszewska-Zielina, E.| Orlik-Kozdoń, B.| Steidl, T.| Tatara, T.2020Energies10.3390/en13184610
Corrosion properties of electrodeposited cu/co multilayersSpilka, M.| Łoński, W.| Babilas, R.2020Metalurgija-
Optimization of the Values of Classifiers Parameters – Is it Still Worthwhile to Deal with it?Kostrzewa, D.| Karczewski, K.| Brzeski, R.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-61401-0_39
Influence of Cements Containing Calcareous Fly Ash on Rheological Properties of Fresh Mortars and Its VariabilityGołaszewski, J.| Ponikiewski, T.| Kostrzanowska-Siedlarz, A.2020RILEM Bookseries10.1007/978-3-030-22566-7_11
Encoder-Decoder Based CNN Structure for Microscopic Image IdentificationPołap, D.| Wozniak, M.| Korytkowski, M.| Scherer, R.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-63830-6_26
Text input with foot gestures using the myo armbandDobosz, K.| Trzcionkowski, M.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-58805-2_39
Fast method of calculating the air-cored coil impedance using the filamentary coil modelTytko, G.2020Progress In Electromagnetics Research M-
Emergency condition of the operation of a non-symmetric tundishMerder, T.| Pieprzyca, J.2020Metalurgija-
Intermetallic phases in alloyed cast iron with 18%Si additionStawarz, M.2020Archives of Foundry Engineering10.24425/afe.2020.131299
On Positive-Correlation-Promoting ReductsHenzel, J.| Janusz, A.| Sikora, M.| Ślęzak, D.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-52705-1_16
Identification of Pavement Model Parameters in the Area of Discontinuous Surface Deformation Based on FWD TestsGrygierek, M.| J. Sternik, K.2020International Journal of Civil Engineering10.1007/s40999-020-00563-y
Coiling simulations of medium-Mn sheet steels using dilatometryMorawiec, M.| Skowronek, A.| Pakieła, W.| Grajcar, A.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/723/1/012020
Carbon nanotube/PTFE as a hybrid platform for lipase B fromCandida antarcticain transformation of α-angelica lactone into alkyl levulinatesSzelwicka, A.| Kolanowska, A.| Latos, P.| Jurczyk, S.| Boncel, S.| Chrobok, A.2020Catalysis Science and Technology10.1039/d0cy00545b
Modern methods of elimination of lost circulation in directional wellsIvanova, T.N.| Zabińska, I.2020Management Systems in Production Engineering10.2478/mspe-2021-0009
Alternating direction projections onto convex sets for super-resolution image reconstructionZhou, B.| Ye, D.-J.| Wei, W.| Woźniak, M.2020Information Technology and Control10.5755/j01.itc.49.1.24121
Realization of solar indoor lighting systemMao, J.| Wang, J.| Stanislav, V.| Robert, A.| Hubert, D.2020Journal of the Mine Ventilation Society of South Africa-
Assessment of durability and reliability of et41 series locomotive wheels based on laboratory testsWITASZEK, M.2020Diagnostyka10.29354/diag/130527
Characterization of corrosion and stress corrosion cracking of AE44 magnesium alloySozańska, M.| Mościcki, A.| Chmiela, B.2020Archives of Metallurgy and Materials10.24425/amm.2020.131750
Influence of uv radiation on tio2 nanoparticles antibacterial behaviourSzmajnta, K.| Szindler, M.M.2020Archives of Materials Science and Engineering10.5604/01.3001.0013.9503
An attempt to use the results of Microtomographic studies of the surface after the period of operation in the numerical analysis of wheel-rail contactsBąkowski, H.| John, A.| Brodny, J.2020Mechanika10.5755/j01.mech.26.4.24008
Physicochemical and biological characterisation of diclofenac oligomeric poly(3-hydroxyoctanoate) hybrids as β-TCP ceramics modifiers for bone tissue regenerationHaraźna, K.| Cichoń, E.| Skibiński, S.| Witko, T.| Solarz, D.| Kwiecień, I.| Marcello, E.| Zimowska, M.| Socha, R.| Szefer, E.| Zima, A.| Roy, I.| Raftopoulos, K.N.| Pielichowski, K.| Witko, M.| Guzik, M.2020International Journal of Molecular Sciences10.3390/ijms21249452
Research on the State of Urban Passenger Mobility in Bulgaria and Prospects for Using Low Carbon Energy for TransportPencheva, V.| Asenov, A.| Georgiev, I.| Sładkowski, A.2020Lecture Notes in Networks and Systems10.1007/978-3-030-42323-0_8
Efficiency of the fast multipole BEM with quadratic elements for 3D linear elasticityPtaszny, J.| Swinka, P.L.2020Proceedings of the 6th European Conference on Computational Mechanics: Solids, Structures and Coupled Problems, ECCM 2018 and 7th European Conference on Computational Fluid Dynamics, ECFD 2018-
Copper oxides on a Cu sheet substrate made by laser techniqueMusztyfaga-Staszuk, M.| Janicki, D.| Gawlińska-Necek, K.| Socha, R.| Putynkowski, G.| Panek, P.2020Materials10.3390/MA13173794
Refinement of Al-5%Cu and Al-25%Cu alloys by means of KoBo methodsRodak, K.| Brzezińska, A.| Sobota, J.2020Archives of Metallurgy and Materials10.24425/amm.2020.133716
Work stands modeling in additive manufacturingOlender, M.2020International Journal of Modern Manufacturing Technologies-
Laser welded s355 and 316l steel pipe joint hydrostatic test simulationWyględacz, B.| Kik, T.| Żuk, M.2020International Journal of Modern Manufacturing Technologies-
Multi-agent Architecture for Internet of Medical ThingsPołap, D.| Srivastava, G.| Woźniak, M.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-61534-5_5
Assessing quality of decision reductsStanczyk, U.| Zielosko, B.2020Procedia Computer Science10.1016/j.procs.2020.09.121
Analysis of AFM images of nanofibre mats for automated processingBlachowicz, T.| Böhm, T.| Grzybowski, J.| Domino, K.| Ehrmann, A.2020Tekstilec10.14502/Tekstilec2020.63.104-112
Efficiency of electricity production technology from post-process gas heat: Ecological, economic and social benefitsMiskiewicz, R.2020Energies10.3390/en13226106
The use of non-destructive testing (NDT) to detect bed joint reinforcement in AAC masonryDrobiec, L.| Jasiński, R.| Mazur, W.2020Applied Sciences (Switzerland)10.3390/app10134645
Artificial intelligence application to improve the performance of distance learning servers during the coronavirus pandemic threat periodKlosowski, P.2020Signal Processing - Algorithms, Architectures, Arrangements, and Applications Conference Proceedings, SPA-
Probabilistic analysis of a buffer overflow duration in data transmission inwireless sensor networksM. Kempa, W.2020Sensors (Switzerland)10.3390/s20205772
The brave new world of Rem KoolhaasSerdyńska, J.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032100
Calorimetric measurements of the Li–Pd systemTerlicka, S.| Dębski, A.| Saternus, M.| Fornalczyk, A.| Gąsior, W.2020Journal of Molecular Liquids10.1016/j.molliq.2020.114074
Analysis of steel production total and by process in poland and romania with forecast until 2023Gajdzik, B.| Piątkowski, J.| Kliś, P.2020Metalurgija-
Virtual prototyping of the suspended monorail in the aspect of increasing the permissible travel speed in hard coal minesHerbuś, K.| Szewerda, K.| Świder, J.2020Eksploatacja i Niezawodnosc10.17531/ein.2020.4.4
The impact of internal insulation on heat transport through the wall: Case studyKrause, P.| Nowoświat, A.| Pawłowski, K.2020Applied Sciences (Switzerland)10.3390/app10217484
Electrophoretic deposition of layer-by-layer unsheathed carbon nanotubes-a step towards steerable surface roughness and wettabilityKorczeniewski, E.| Zieba, M.| Zieba, W.| Kolanowska, A.| Bolibok, P.| Kowalczyk, P.| Wiertel-Pochopien, A.| Zawała, J.| Boncel, S.| Terzyk, A.P.2020Materials10.3390/ma13030595
Application of the Earned Value Mathod (EVM) for mining projects assessment - critical approach - part 1 - method assumptionsGetler, A.| Tchórzewski, S.2020International Journal of Electrical and Computer Engineering Systems10.29227/IM-2020-01-84
The impact of process factors on creating defects, mainly lustrous carbon, during the production of ductile iron using the lost-foam casting (LFC) methodJezierski, J.| Jureczko, M.| Dojka, R.2020Metals10.3390/met10081022
Wear mechanism for protective coatings used for protecting boiler installation componentsSzymański, K.| Niemiec, D.| Szpak, M.| Augustyński, Ł.2020Ochrona Przed Korozja-
Fuzzy Ordered c-Means Clustering and Least Angle Regression for Fuzzy Rule-Based Classifier: Study for Imbalanced DataLeski, J.M.| Czabanski, R.| Jezewski, M.| Jezewski, J.2020IEEE Transactions on Fuzzy Systems10.1109/TFUZZ.2019.2939989
AQM Mechanism with Neuron Tuning ParametersSzyguła, J.| Domański, A.| Domańska, J.| Czachórski, T.| Marek, D.| Klamka, J.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-42058-1_25
The method of technical condition description dedicated for engineering software developmentJanik, W.2020International Journal of Modern Manufacturing Technologies-
Catalytic conversion of methylated aromatics over wood-derived chars – The role of reforming agents and the effect of methyl groupsKorus, A.| Szlęk, A.| Korus, I.| Samson, A.2020Fuel10.1016/j.fuel.2020.118521
Deformability and quantitative description of the microstructure of hot-deformed A-286 superalloyDucki, K.| Mendala, J.| Wojtynek, L.2020METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings10.37904/metal.2020.3476
Influence of the Applied Outlier Detection Methods on the Quality of ClassificationMoska, B.| Kostrzewa, D.| Brzeski, R.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_8
Coatings for anti-corrosion protection manufactured by thermal spraying methodsSzymański, K.| Augustyński, Ł.| Gdesz, M.2020Ochrona Przed Korozja-
Influence of Chitosan molecular weight and degree of deacetylation on membrane physicochemical and separation properties in ethanol dehydration by the vapour permeation processGnus, M.2020Progress on Chemistry and Application of Chitin and its Derivatives10.15259/PCACD.25.006
FEM simulation of induction heating of gears for a simultaneous, dual-frequency inverterLegutko, P.2020Przeglad Elektrotechniczny10.15199/48.2020.10.01
Damage identification and quantification in beams using wigner-ville distributionKatunin, A.2020Sensors (Switzerland)10.3390/s20226638
Peripherally Donor-Installed 7,8-Diaza[5]helicenes as a Platform for Helical LuminophoresIkari, Y.| Kaihara, T.| Goto, S.| Bovenkerk, M.| Grenz, D.C.| Esser, B.| Ferreira, M.| Stachelek, P.| Data, P.| Yoshida, T.| Ikai, T.| Tohnai, N.| Minakata, S.| Takeda, Y.2020Synthesis (Germany)10.1055/a-1343-5810
The surface morphology and electrochemical properties of pure titanium obtained by selective laser melting methodWoźniak, A.| Adamiak, M.| Ziębowicz, B.2020Solid State Phenomena10.4028/www.scientific.net/SSP.308.21
Modelling the impact of investments on energy intensity in the polish steel industry as a step towards industry 4.0Gajdzik, B.2020METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings10.37904/metal.2020.3663
Impact of Bi and Sn on microstructure and corrosion resistance of zinc coatings obtained in Zn-AlNi bathKania, H.| Saternus, M.| Kudlácek, J.2020Materials10.3390/MA13173788
Modeling of Magnetorheological Fluids Relative Magnetic Permeability by using a Neural Network approachKowol, P.| Szczygiel, M.| Lo Sciuto, G.| Capizzi, G.202020th IEEE Mediterranean Electrotechnical Conference, MELECON 2020 - Proceedings10.1109/MELECON48756.2020.9140517
Application of waste polymers as basic material for ultrafiltration membranes preparationAdamczak, M.| Kamińska, G.| Bohdziewicz, J.2020Water (Switzerland)10.3390/w12010179
Porting wire-grid MoM framework to reconfigurable computing technologyTopa, T.2020IEEE Antennas and Wireless Propagation Letters10.1109/LAWP.2020.3012587
Real-time video stitching for mine surveillance using a hybrid image registration methodBai, Z.| Li, Y.| Chen, X.| Yi, T.| Wei, W.| Wozniak, M.| Damasevicius, R.2020Electronics (Switzerland)10.3390/electronics9091336
Evaluation of thermal properties of MMCp composites with silver alloy matrixWieczorek, J.| Maciąg, T.| Kowalczyk, K.| Migas, D.2020Journal of Thermal Analysis and Calorimetry10.1007/s10973-020-09741-5
The use of lasers at various stages of the manufacturing process of solar cells based on crystalline siliconMusztyfaga-Staszuk, M.A.| Panek, P.I.2020Solid State Phenomena10.4028/www.scientific.net/SSP.308.138
Effect of heterocycle donor in 2-cyanoacrylic acid conjugated derivatives for DSSC applicationsFabiańczyk, A.| Gnida, P.| Chulkin, P.| Kula, S.| Filapek, M.| Szlapa-Kula, A.| Janeczek, H.| Schab-Balcerzak, E.2020Solar Energy10.1016/j.solener.2020.08.069
Comparison of selected point estimators of vibration signals for purposes of fault detection in rolling bearingsKrol, A.| Fidali, M.| Jamrozik, W.2020Vibrations in Physical Systems-
Application of artificial neural networks to heat transfer simulations of thin film structures irradieted by laserKorczak, A.| Mucha, W.| Piasecka-Belkhayat, A.202015th International Conference Mechatronic Systems and Materials, MSM 202010.1109/MSM49833.2020.9201634
Developing induction motor state observers with increased robustnessBialon, T.| Pasko, M.| Niestrój, R.2020Energies10.3390/en13205487
Finite element head model for the crew injury assessment in a light armoured vehicleBurkacki, M.| Wolański, W.| Suchoń, S.| Joszko, K.| Gzik-Zroska, B.| Sybilski, K.| Gzik, M.2020Acta of Bioengineering and Biomechanics10.37190/ABB-01556-2020-02
Identification of nonstationary parameters of electric arc furnace model using Monte Carlo approachKlimas, M.| Grabowski, D.20202020 Progress in Applied Electrical Engineering, PAEE 202010.1109/PAEE50669.2020.9158732
Downhill, ultrafast and fast folding proteins revisedBanach, M.| Stapor, K.| Konieczny, L.| Fabian, P.| Roterman, I.2020International Journal of Molecular Sciences10.3390/ijms21207632
Application of the Swarm Intelligence Algorithm for Reconstructing the Cooling Conditions of Steel Ingot Continuous CastingZielonka, A.| Słota, D.| Hetmaniok, E.2020Energies10.3390/en13102429
Performance evaluations of a cloud computing physical machine with task reneging and task resubmission (feedback)Kuaban, G.S.| Soodan, B.S.| Kumar, R.| Czekalski, P.2020Communications in Computer and Information Science10.1007/978-3-030-50719-0_14
IntroductionPaszek, S.| Boboń, A.| Berhausen, S.| Majka, Ł.| Nocoń, A.| Pruski, P.2020Lecture Notes in Electrical Engineering10.1007/978-3-030-37976-6_1
Fatigue properties of AZ31 and We43 magnesium alloysJunak, G.2020Archives of Metallurgy and Materials10.24425/amm.2020.132811
Vacuum refinning cooper blister to remove antimonySmalcerz, A.| Blacha, L.2020Metalurgija-
Pressure-assisted solvent- And catalyst-free production of well-defined poly(1-vinyl-2-pyrrolidone) for biomedical applicationsMaksym, P.| Tarnacka, M.| Heczko, D.| Knapik-Kowalczuk, J.| Mielańczyk, A.| Bernat, R.| Garbacz, G.| Kaminski, K.| Paluch, M.2020RSC Advances10.1039/d0ra02246b
The influence of cooling rate, chromium and silicon addition on the structure and properties of AlCoCrFeNiSi high entropy alloysBabilas, R.| Łoński, W.| Boryło, P.| Kądziołka-Gaweł, M.| Gębara, P.| Radoń, A.2020Journal of Magnetism and Magnetic Materials10.1016/j.jmmm.2020.166492
Influence of vacuum on adjusting parameters of high pressure die casting parts from alloy AlSi9Cu3(Fe)Ferdyn, M.| Piatkowski, J.2020METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings10.37904/metal.2020.3630
Implementation of the inductively coupled plasma etching processes for forming gallium nitride nanorods used in ultraviolet light-emitting diode technologyEkielski, M.| Wzorek, M.| Gołaszewska, K.| Domanowska, A.| Taube, A.| Sochacki, M.2020Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics10.1116/6.0000133
Application of biological method for removing selected heavy metals from sewage sludgeWillner, J.| Fornalczyk, A.2020Physicochemical Problems of Mineral Processing10.37190/ppmp/118253
Wheeled robot dedicated to the evaluation of the technical condition of large-dimension engineering structuresDomin, J.| Górski, M.| Białecki, R.| Zajac, J.| Grzyb, K.| Kielan, P.| Adamczyk, W.| Ostrowski, Z.| Wienchol, P.| Lamkowski, K.| Kaminski, J.| Doledutko, M.| Rosiek, R.2020Robotics10.3390/ROBOTICS9020028
Optimal selection of time-current characteristic of overcurrent protection for induction motors in drives of mining machines with prolonged starting timeJoostberens, J.| Heyduk, A.| Boron, S.| Bauerek, A.2020Energies10.3390/en13174466
Designing slab-column constructions due to the possibility of a progressive collapse caused by a punchingWieczorek, M.| Wieczorek, B.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/4/042055
Cost-quantitative analysis of non-compliance in the internal logistics processBalon, B.| Roszak, M.2020Production Engineering Archives10.30657/pea.2020.26.13
Frequency response testing of zero-sequence current transformers for mining ground fault protection relaysKuliński, K.| Heyduk, A.2020International Journal of Electronics and Telecommunications10.24425-ijet.2020.134030/752
Influence of basalt particles on tribological properties of polymeric composites intended for friction contacts in means of transportPosmyk, A.| Myalski, J.2020Composites Theory and Practice-
Methodology for revealing the phases and microstructural constituents of the CMSX-4 Nickel-based superalloy implicating their computer-aided detection for image analysisSzczotok, A.| Reichel, H.2020Materials10.3390/ma13020341
Structural and electrochemical study of resorbable Ca32Mg12Zn38Yb18-xBx (x=1, 2, 3) metallic glasses in Ringer's solutionSzyba, D.| Bajorek, A.| Babilas, R.2020Journal of Alloys and Compounds10.1016/j.jallcom.2019.152313
Development of a non-destructive technique for measuring thermal conductivity of material with small anisotropy based on application of the reduced order techniqueAdamczyk, W.| Ostrowski, Z.| Ryfa, A.2020Measurement: Journal of the International Measurement Confederation10.1016/j.measurement.2020.108078
Wireless power transfer with almost constant output voltage at variable loadKaczmarczyk, Z.| Zellner, M.2020Przeglad Elektrotechniczny10.15199/48.2020.07.05
Numerical analysis of integrated photonics structures for hemoglobin sensor applicationStruk, P.2020Photonics Letters of Poland10.4302/plp.v12i2.1008
The Novel Approach to the Tuning of the Reduced-Order Active Disturbance Rejection Controller for Second-Order ProcessesNowak, P.| Grelewicz, P.| Czeczot, J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_113
Emergency repair of the bridge from prefabricated posttensioned beamsSliwka, A.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/4/042053
Computer system based on reasoning methods to support the selection of industry robotsOciepka, P.| Herbuś, K.2020International Journal of Modern Manufacturing Technologies-
Metagenomic clustering in search of common originKawulok, J.| Kawulok, M.2020BIOINFORMATICS 2020 - 11th International Conference on Bioinformatics Models, Methods and Algorithms, Proceedings; Part of 13th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2020-
CORROSION BEHAVIOUR CORRELATION of the SECONDARY ALUMINIUM CASTS in NATURAL ATMOSPHERE and LABORATORY CONDITIONSKuchariková, L.| Liptáková, T.| Tillová, E.| Bonek, M.| Medvecká, D.2020Archives of Metallurgy and Materials10.24425/amm.2020.133713
Thermal analysis of matrix composite reinforced with Al2O3 particlesWłodarczyk-Fligier, A.| Polok-Rubiniec, M.| Konieczny, J.2020Journal of Achievements in Materials and Manufacturing Engineering10.5604/01.3001.0014.1957
Large-power synchronous motor braking by field currentHyla, M.2020Przeglad Elektrotechniczny10.15199/48.2020.11.04
Writhing movement detection in newborns on the second and third day of life using pose-based feature machine learning classificationDoroniewicz, I.| Ledwoń, D.J.| Affanasowicz, A.| Kieszczyńska, K.| Latos, D.| Matyja, M.| Mitas, A.W.| Myśliwiec, A.2020Sensors (Switzerland)10.3390/s20215986
Time dependent diffusion model for security driven software defined networksCzachórski, T.| Gelenbe, E.| Kuaban, G.S.| Marek, D.2020CEUR Workshop Proceedings-
A novel approach for QRS complex detection in patients with atrial arrhythmiaGiraldo-Guzmán, J.| Ruiz, E.| Colorado, L.A.M.| Lasprilla, G.I.B.| Kotas, M.2020Proceedings of SPIE - The International Society for Optical Engineering10.1117/12.2576019
Numerical co-simulation in industry 4.0 – Creating digital twin of belt transmission with NX and MatlabMalaka, J.| Hetmańczyk, M.2020International Journal of Modern Manufacturing Technologies-
Numerical assessment of the influence of former mining activities and plasticity of rock mass on deformations of terrain surfaceSikora, P.| Wesołowski, M.2020International Journal of Mining Science and Technology10.1016/j.ijmst.2020.11.001
Localization technique of IoT Nodes Using Artificial Neural Networks (ANN)Krupanek, B.| Bogacz, R.2020International Journal of Electronics and Telecommunications10.24425-ijet.2020.134039/761
Application of immobilized cholest-4-en-3-one ∆1-dehydrogenase from sterolibacterium denitrificans for dehydrogenation of steroidsTataruch, M.| Wójcik, P.| Wojtkiewicz, A.M.| Zaczyk, K.| Szymańska, K.| Szaleniec, M.2020Catalysts10.3390/catal10121460
Estimation of Passenger Car Equivalents for Two-Lane and Turbo Roundabouts Using AIMSUNGranà, A.| Giuffrè, T.| Macioszek, E.| Acuto, F.2020Frontiers in Built Environment10.3389/fbuil.2020.00086
On-line estimation of the ultrasonic power in a continuous flow sonochemical reactorIlewicz, W.| Skupin, P.| Choiński, D.| Błotnicki, W.| Bielecki, Z.2020Energies10.3390/en13112952
Chladni figures in modal analysis of a double-panel structureRzepecki, J.| Chraponska, A.| Budzan, S.| Isaac, C.W.| Mazur, K.| Pawelczyk, M.2020Sensors (Switzerland)10.3390/s20154084
Study of the Microsleep in Public Transport DriversBurdzik, R.| Celiński, I.| Młyńczak, J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-27687-4_7
Influence of temperature on optical spectra of SbSI photonic crystalsStarczewska, A.| Kępińska, M.| Szperlich, P.| Duka, P.| Nowak, M.2020Optical Materials10.1016/j.optmat.2019.109606
Rapid MSPD-LC–MS/MS procedure for determination of pesticides in potato tubersDanek, M.| Sajdak, M.| Płonka, J.| Barchanska, H.2020Journal of Chromatographic Science10.1093/chromsci/bmaa053
Research on the reduction of cooper slag using an alternative coal rangeBlacha, L.| Łabaj, J.| Jodkowski, M.| Smalcerz, A.2020Metalurgija-
Determination of Synchronous Generator Model Parameters in the Laboratory and Selected Generating Unit Element Model Parameters in Power PlantsPaszek, S.| Boboń, A.| Berhausen, S.| Majka, Ł.| Nocoń, A.| Pruski, P.2020Lecture Notes in Electrical Engineering10.1007/978-3-030-37976-6_8
Examples and concepts of floating architecture in the face of climate change - The example of SzczecinBradecki, T.| Konsek, P.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032062
Comparison of neural network and KNN classifiers, for recognizing hand-written digitsRóżycki, I.| Wolszleger, A.2020CEUR Workshop Proceedings-
Developing occupancy grid with automotive simulation environmentMarkiewicz, P.| Porębski, J.2020Applied Sciences (Switzerland)10.3390/app10217629
Effect of eccentricity of applied force and geometrical imperfections on stiffness of stack of cuboidal steel elementsSmolana, M.| Gromysz, K.2020Materials10.3390/ma13143174
Synchronous reluctance machine drive control with fast prototyping card implementationBurlikowski, W.| Kielano, P.| Kowaliko, Z.2020Archives of Electrical Engineering10.24425/aee.2020.134627
Modeling of heat distribution at the spindle bearing test rigMuszyński, M.| Kosmol, J.| Sokołowski, A.2020International Journal of Modern Manufacturing Technologies-
Influence of Tilted Fields on Magnetization Reversal in Fe NanodotsEhrmann, A.| Blachowicz, T.2020Proceedings of the 2020 IEEE 10th International Conference on Nanomaterials: Applications and Properties10.1109/NAP51477.2020.9309584
Proposal of empirical homogenization of masonry wall made of AAC masonry unitsJasiński, R.| Grzyb, K.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/2/022084
Driving safety improved with control of magnetorheological dampers in vehicle suspensionKrauze, P.| Kasprzyk, J.2020Applied Sciences (Switzerland)10.3390/app10248892
Analysis of the Sensitivity of Generating Unit Simulation Waveforms to Changes of Model ParametersPaszek, S.| Boboń, A.| Berhausen, S.| Majka, Ł.| Nocoń, A.| Pruski, P.2020Lecture Notes in Electrical Engineering10.1007/978-3-030-37976-6_3
Quasi-balanced method of measuring the dielectric loss factorCichy, A.W.| Kampik, M.2020CPEM Digest (Conference on Precision Electromagnetic Measurements)10.1109/CPEM49742.2020.9191790
Impact of carbon foam cell sizes on the microstructure and properties of pressure infiltrated magnesium matrix compositesOlszówka-Myalska, A.| Godzierz, M.| Myalski, J.2020Materials10.3390/ma13245619
An eddy current model of pot-cored coil for testing multilayer conductors with a holeTYTKO, G.2020Bulletin of the Polish Academy of Sciences: Technical Sciences10.24425/bpasts.2020.135388
Avigilon compact camera's test for integrated safety system within airport securityJevčák, J.| Kelemen, M.| Antoško, M.| Choma, L.| Kozuba, J.2020Archives of Transport10.5604/01.3001.0014.4200
Dry reforming of methane over cnt-supported CeZrO2, Ni and Ni-CeZrO2 catalystsŁamacz, A.| Jagódka, P.| Stawowy, M.| Matus, K.2020Catalysts10.3390/catal10070741
Novel insight on the local surface properties of ZnO nanowiresKwoka, M.| Kulis-Kapuscinska, A.| Zappa, D.| Comini, E.| Szuber, J.2020Nanotechnology10.1088/1361-6528/ab8dec
The problem of compressive strength in direction perpendicular to the grains on example of tests of the load-bearing capacity of the continuously supported timber-frame sill platesBrol, J.| Kubica, J.| Weglorz, M.2020Materials10.3390/ma13051160
Possibilities and limitations in shaping customized residential interiorsKucharczyk-Brus, B.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/4/042042
1,3,4-Thiadiazole-Containing Azo Dyes: Synthesis, Spectroscopic Properties and Molecular StructureKudelko, A.| Olesiejuk, M.| Luczynski, M.| Swiatkowski, M.| Sieranski, T.| Kruszynski, R.2020Molecules10.3390/molecules25122822
Personalized implants produced with SLM processBobik, G.| Żmudzki, J.| Bąk, M.| Niedzielska, I.| Adamiak, M.| Popielski, P.2020International Journal of Modern Manufacturing Technologies-
3D numerical simulation of consolidation induced in soft ground by EPB technology and lining defectsOchmański, M.| Spacagna, R.L.| Modoni, G.2020Computers and Geotechnics10.1016/j.compgeo.2020.103830
Towards energetic autonomy of UAVMateja, K.| Skarka, W.2020Advances in Transdisciplinary Engineering10.3233/ATDE200102
A R744 transcritical refrigeration test rig equipped with a transparent two-phase ejector for flow visualisation: Experimental studyHaida, M.| Fingas, R.| Szwajnoch, W.| Smolka, J.| Palacz, M.| Bodys, J.| Nowak, A.J.2020Refrigeration Science and Technology10.18462/iir.rankine.2020.1215
ITS and Systems Engineering – Methodical AspectsKaroń, G.| Mikulski, J.2020Communications in Computer and Information Science10.1007/978-3-030-59270-7_6
Drag reduction of semi-trailer aerodynamic devices determined by two different methodsSkrúcaný, T.| Semanová, Š.| Gnap, J.| Figlus, T.| Čupera, J.2020Tehnicki Vjesnik10.17559/TV-20180831153043
Ultrahigh rate supercapacitor based on self-standing carbon nanotubes supported vertically aligned MoS2sheetsTiwari, P.| Janas, D.| Chandra, R.2020MRS Advances10.1557/adv.2020.338
3d printing as new technology in perspective of industry 4.0Kampa, A.| Olender, M.2020International Journal of Modern Manufacturing Technologies-
Thermo-ecological assessment of renewable energy systems integrated with energy storageSimla, T.| Stanek, W.| Gladysz, P.2020ECOS 2020 - Proceedings of the 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems-
Microstructural and mechanical characterization of alloysSroka, M.| Golański, G.2020Crystals10.3390/cryst10100945
Palladium loaded BEA zeolites as efficient catalysts for aqueous-phase diclofenac hydrodechlorinationZawadzki, B.| Kowalewski, E.| Asztemborska, M.| Matus, K.| Casale, S.| Dzwigaj, S.| Śrębowata, A.2020Catalysis Communications10.1016/j.catcom.2020.106113
Multiobjective global optimization of mechanical systems with CRACKSBeluch, W.| Długosz, A.2020Journal of Theoretical and Applied Mechanics (Poland)10.15632/jtam-pl/119092
Removal of lead from blister copper by melting in the induction vacuum furnaceSmalcerz, A.| Blacha, L.2020Archives of Foundry Engineering10.24425/afe.2020.131307
Entropy analysis of hydrogen production in electrolytic processesChmielniak, T.| Remiorz, L.2020Energy10.1016/j.energy.2020.118468
Optical diagnostic system for visualization subcutaneous bloodvesselsOpilski, Z.| Pustelny, T.| Pach, M.| Hejczyk, T.2020Opto-electronics Review10.24425/opelre.2020.132501
Assessment of the quality of abrasion-resistant plates welded jointGórka, J.2020Journal of Mining and Metallurgy, Section B: Metallurgy10.2298/JMMB190515010G
Development of high performance computing systemsKozielski, S.| Mrozek, D.2020Communications in Computer and Information Science10.1007/978-3-030-50719-0_5
Hardness and microstructure distributions in gear wheels made of steel AISI 4340 after consecutive dual frequency induction hardeningBarglik, J.| Ducki, K.| Kuc, D.| Smagór, A.| Smalcerz, A.2020International Journal of Applied Electromagnetics and Mechanics10.3233/JAE-209111
Geophysical Measurements in the Aspect of Recognition of Discontinuous Deformation Processes – A Case StudyJendruś, R.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-13273-6_66
Computational Models of StructuresBurczyński, T.| Kuś, W.| Beluch, W.| Długosz, A.| Poteralski, A.| Szczepanik, M.2020Solid Mechanics and its Applications10.1007/978-3-030-34161-9_2
Assessing the Influence of the Teaching Method on Cognitive Aspects in the Process of Mathematical Education Among Blind PeopleMaćkowski, M.| Brzoza, P.| Rojewska, K.| Spinczyk, D.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-29885-2_19
Structure of Fe-Mn-Al-C steels after gleeble simulations and hot-rollingSozańska-Jedrasik, L.| Mazurkiewicz, J.| Matus, K.| Borek, W.2020Materials10.3390/ma13030739
Induction of Centre-Based Biclusters in Terms of Boolean ReasoningMichalak, M.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_23
Modeling of non-linear loads in the frequency domain on the example of selected LED lighting fixturesBuła, D.| Adrikowski, T.| Pasko, M.2020Przeglad Elektrotechniczny10.15199/48.2020.02.04
Estimation of the energy released during propagating brush dischargePtak, S.| Smalcerz, A.| Ostrowski, P.2020Journal of Electrostatics10.1016/j.elstat.2019.103416
The set of contemporary aquatic architectureBujniewicz, Z.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032002
Environmentally responsible policy of wastes in steel industryNowacki, K.2020Metalurgija-
Hybrid system of emotion evaluation in physiotherapeutic proceduresRomaniszyn-Kania, P.| Pollak, A.| Danch-Wierzchowska, M.| Kania, D.| Myśliwiec, A.P.| Piętka, E.| Mitas, A.W.2020Sensors (Switzerland)10.3390/s20216343
Effect of solution heat-treated conditions on structure and mechanical properties of high-manganese steelOpiela, M.| Fojt-Dymara, G.| Grzegorczyk, B.2020International Journal of Modern Manufacturing Technologies-
Incorporating Automatic Model Checking into GPenSIMDavidrajuh, R.| Skolud, B.| Krenczyk, D.2020Studies in Systems, Decision and Control10.1007/978-3-030-27652-2_9
Microstructure and corrosion resistance of a duplex structured Mg–7.5Li–3Al–1ZnDobkowska, A.| Adamczyk – Cieślak, B.| Kubásek, J.| Vojtěch, D.| Kuc, D.| Hadasik, E.| Mizera, J.2020Journal of Magnesium and Alloys10.1016/j.jma.2020.07.007
Simulations of electrical conductivity of composite materials and optimization of artificial neural networksKekez, S.2020RILEM Bookseries10.1007/978-3-030-43332-1_29
Advanced polymeric materials for reconstructive treatment after the intra-oral tumor resectionsBialas, O.| Żmudzki, J.| Adamiak, M.2020International Journal of Modern Manufacturing Technologies-
Mechanical and non-destructive testing of plasterboards subjected to a hydration processRanachowski, Z.| Ranachowski, P.| Debowski, T.| Brodecki, A.| Kopec, M.| Roskosz, M.| Fryczowski, K.| Szymków, M.| Krawczyk, E.| Schabowicz, K.2020Materials10.3390/ma13102405
THE IMPACT of COMPOSITION and the DENSIFICATION LEVEL of FURAN MOLDING COMPOUNDS on the STRENGTH of LARGE-SIZE CASTING MOLDSPetrus, Ł.| Bulanowski, A.| Kołakowski, J.| Urbanowicz, M.| Sobieraj, J.| Jelonek, M.| Brzeżański, M.| Zych, J.S.| Janerka, K.2020Archives of Metallurgy and Materials10.24425/amm.2020.133710
Laser-Induced Periodic Surface Structure Enhances Neuroelectrode Charge Transfer Capabilities and Modulates Astrocyte FunctionKelly, A.| Farid, N.| Krukiewicz, K.| Belisle, N.| Groarke, J.| Waters, E.M.| Trotier, A.| Laffir, F.| Kilcoyne, M.| O'Connor, G.M.| Biggs, M.J.2020ACS Biomaterials Science and Engineering10.1021/acsbiomaterials.9b01321
The effect of delimitation of the area on the assessment of the density of the road network structureSoczówka, P.| Żochowska, R.| Sobota, A.| Kłos, M.J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-34069-8_2
Preparation and characterization of lightweight glass–ceramics based on industrial wastesKozłowski, M.| Khater, G.| Olesik, P.| Mahmoud, M.2020Journal of the Australian Ceramic Society10.1007/s41779-019-00438-z
Deep learning based switching filter for impulsive noise removal in color imagesRadlak, K.| Malinski, L.| Smolka, B.2020Sensors (Switzerland)10.3390/s20102782
Optimizing the Data Flow in a Network Communication Between Railway NodesPolak, R.| Laskowski, D.| Matyszkiel, R.| Łubkowski, P.| Konieczny, Ł.| Burdzik, R.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-27687-4_35
Spatio-Temporal Filtering for Evoked Potentials DetectionPiela, M.| Kotas, M.| Ortiz, S.H.C.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_4
Fiber optic humidity sensor based on silk fibroin interference filmsOpilski, Z.| Procek, M.| Aznar-Cervantes, S.D.| Cenis, J.L.| Barbel, X.M.2020Photonics Letters of Poland10.4302/plp.v12i2.1018
Efficient Synthesis of Novel 1,3,4-Oxadiazoles Bearing a 4-N,N-Dimethylaminoquinazoline Scaffold via Palladium-Catalyzed Suzuki Cross-Coupling ReactionsWołek, B.| Werłos, M.| Komander, M.| Kudelko, A.2020Molecules (Basel, Switzerland)10.3390/molecules25215150
Model of the broadband interferometric optical biosensor in a planar configurationBłahut, M.2020Photonics Letters of Poland10.4302/plp.v12i2.987
Application of crowd simulations in the evaluation of tracking algorithmsStaniszewski, M.| Foszner, P.| Kostorz, K.| Michalczuk, A.| Wereszczyński, K.| Cogiel, M.| Golba, D.| Wojciechowski, K.| Polański, A.2020Sensors (Switzerland)10.3390/s20174960
FxLMS Control of an Off-Road Vehicle Model with Magnetorheological DampersKrauze, P.| Kasprzyk, J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_63
Comparison of 13.56 MHz band class DE inverters built with SiC MOSFET and GaN FET transistors)Przybyła, K.| Kasprzak, M.2020Przeglad Elektrotechniczny10.15199/48.2020.07.12
The analysis of steel production and utilization of production capacity in polish steel industryGajdzik, B.2020Metalurgija-
Frequency Method for Determining the Equivalent Parameters of Fractional-Order Elements L CJakubowska-Ciszek, A.| Walczak, J.2020Lecture Notes in Electrical Engineering10.1007/978-3-030-17344-9_19
Sorption and desorption of cadmium and lead on pectin-based biosorbents–batch and column studiesJakóbik-Kolon, A.| Bok-Badura, J.2020Separation Science and Technology (Philadelphia)10.1080/01496395.2019.1583253
Automation Process of Telecommunication Networks Deployment in Microsoft Azure Cloud TechnologyBasa, R.| Mrozek, D.| Lavriv, O.| Krasko, O.2020Proceedings - 15th International Conference on Advanced Trends in Radioelectronics, Telecommunications and Computer Engineering, TCSET 202010.1109/TCSET49122.2020.235484
Architecture vs. GlobalizationMajerska-Pałubicka, B.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/2/022078
Tribological characteristic of tool steel surface layer alloyed using laserMirosław, B.| Eva, T.2020Solid State Phenomena10.4028/www.scientific.net/SSP.308.110
Application of the homotopy method for fractional inverse stefan problemSlota, D.| Chmielowska, A.| Brociek, R.| Szczygiel, M.2020Energies10.3390/en13205474
Illumination of objects and lighting of public spacesFross, K.| Gumińska, A.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032018
Personalized arm gesture recognition using the hmm-based signature verification engineSzedel, J.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-58805-2_49
How accurate can UWB and dead reckoning positioning systems be? Comparison to slam using the rplidar systemGrzechca, D.| Ziębiński, A.| Paszek, K.| Hanzel, K.| Giel, A.| Czerny, M.| Becker, A.2020Sensors (Switzerland)10.3390/s20133761
Structure and growth kinetics of zinc coatings on reinforcing steel B500SPKania, H.| Sipa, J.| Saternus, M.2020Ochrona Przed Korozja10.15199/40.2020.5.3
Closing RemarksBurczyński, T.| Kuś, W.| Beluch, W.| Długosz, A.| Poteralski, A.| Szczepanik, M.2020Solid Mechanics and its Applications10.1007/978-3-030-34161-9_6
Synthesis of hydrogels made of poly-γ-glutamic acid (γ-PGA) for potential applications as probiotic-delivery vehiclesKwiecień, I.| Niewolik, D.| Ekere, A.I.| Gupta, A.| Radecka, I.2020Applied Sciences (Switzerland)10.3390/APP10082787
Transfer Learning for Segmenting Dimensionally Reduced Hyperspectral ImagesNalepa, J.| Myller, M.| Kawulok, M.2020IEEE Geoscience and Remote Sensing Letters10.1109/LGRS.2019.2942832
Increment Count Method and its PLC-based Implementation for Autotuning of Reduced-Order ADRC with Smith PredictorGrelewicz, P.| Nowak, P.| Czeczot, J.| Musial, J.2020IEEE Transactions on Industrial Electronics10.1109/TIE.2020.3045696
Effect of fail-safe mode on the damping characteristics of a bypass-controlled shock absorberKonieczny, Ł.2020Transport Problems10.21307/TP-2020-032
Synthesis and characterization of bimetallic Ru-Re catalysts supported on oxide carriersSmykała, S.| Adamska, K.| Pawlyta, M.2020World Congress on Recent Advances in Nanotechnology10.11159/icnnfc20.138
A Study of Structure and Morphology of Bulk Metallic Glasses after Laser Beam TreatmentPilarczyk, W.2020Journal of Materials Engineering and Performance10.1007/s11665-019-04462-9
Controllability of Higher Order Linear Systems with Multiple Delays in ControlKlamka, J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_94
Highly efficient extraction procedures based on natural deep eutectic solvents or ionic liquids for determination of 20-hydroxyecdysone in spinachBajkacz, S.| Rusin, K.| Wolny, A.| Adamek, J.| Erfurt, K.| Chrobok, A.2020Molecules10.3390/molecules25204736
Editorial – ECOS 2019 energy SIStanek, W.| Adamczyk, W.2020Energy10.1016/j.energy.2020.118775
A-Weighting for Acoustic Radiation Shaping of a Vibrating PlateWrona, S.| Mazur, K.| Rzepecki, J.| Chraponska, A.| Pawelczyk, M.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_15
Structure and tribological properties of alcrn + crcn coatingLukaszkowicz, K.| Sondor, J.| Paradecka, A.| Pawlyta, M.| Chmiela, B.| Pancielejko, M.| Szczucka-Lasota, B.| Węgrzyn, T.| Tański, T.2020Coatings10.3390/coatings10111083
Multi-criteria choice of the region for the construction of a logistics center based on AHP: Case study for KazakhstanSładkowski, A.| Teltayev, B.| Izteleuova, M.2020Transport Problems10.21307/TP-2020-025
Long- And short-term comparative analysis of renewable energy sourcesBula, D.| Grabowski, D.| Lange, A.| MacIązek, M.| Pasko, M.2020Energies10.3390/en13143610
Evaluation of the influence of brown coal operation on the landscape shaping and the environment protectionOpania, S.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/2/022069
Risk-based planning of diagnostic testing of turbines operating with increased flexibilityTomala, M.| Rusin, A.| Wojaczek, A.2020Energies10.3390/en13133464
Silicon nanowires for gas sensing: A reviewAkbari-Saatlu, M.| Procek, M.| Mattsson, C.| Thungström, G.| Nilsson, H.-E.| Xiong, W.| Xu, B.| Li, Y.| Radamson, H.H.2020Nanomaterials10.3390/nano10112215
EFFECT OF Mg ADDITION ON THE CRYSTALLIZATION KINETICS OF Zn-Al-Cu ALLOYSKrupinski, M.| Labisz, K.| Jonda, E.2020Journal of Mining and Metallurgy, Section B: Metallurgy10.2298/JMMB200120029K
UWB positioning system with the support of MEMS sensors for indoor and outdoor environmentPaszek, K.| Grzechca, D.| Tomczyk, M.| Marciniak, A.2020Journal of Communications10.12720/jcm.15.6.511-518
Phase behavior of amorphous/semicrystalline conjugated polymer blendsFanta, G.M.| Jarka, P.| Szeluga, U.| Tański, T.| Kim, J.Y.2020Polymers10.3390/POLYM12081726
PEO layers on Mg-based metallic glass to control hydrogen evolution rateCesarz-Andraczke, K.| Kazek-Kęsik, A.2020Bulletin of the Polish Academy of Sciences: Technical Sciences10.24425/bpasts.2020.131841
Use of surface working for improving the working life of piston valves of combustion enginesFilipowicz, K.| Kuczaj, M.| Mikuła, S.2020Transport Problems10.21307/TP-2020-037
Heat treatment routes utilizing intercritical annealing of automotive medium-mn steel sheetsGrajcar, A.| Morawiec, M.2020Metallurgia Italiana-
Effect of the thickness of TiO2 films on the structure and corrosion behavior of Mg-based alloysKania, A.| Nolbrzak, P.| Radoń, A.| Niemiec-Cyganek, A.| Babilas, R.2020Materials10.3390/ma13051065
Shaping properties of self compacting concrete by different steel fibrePonikiewski, T.| Katzer, J.2020Key Engineering Materials10.4028/www.scientific.net/KEM.832.21
Laser surface alloying of aluminium alloys with cu/fe metallic powdersPakieła, W.| Brytan, Z.2020Solid State Phenomena10.4028/www.scientific.net/SSP.308.64
Self-organization of silver nanoparticles during synthesis of Ag–Au nanoalloy by UV irradiation methodŁukowiec, D.| Radoń, A.2020Journal of Materials Science10.1007/s10853-019-04136-w
Detection and segmentation of brain tumors from MRI using U-NetsKotowski, K.| Nalepa, J.| Dudzik, W.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-46643-5_17
A Wideband Current ShuntMalinowski, M.| Kampik, M.| Grzenik, M.| Kubiczek, K.| Dudzik, K.2020CPEM Digest (Conference on Precision Electromagnetic Measurements)10.1109/CPEM49742.2020.9191741
The effect of the pelvis position in the sagittal plane on loads in the human musculoskeletal systemMichnik, R.| ZadoŃ, H.| Nowakowska-Lipiec, K.| Jochymczyk-WoŹniak, K.| MyŚliwiec, A.| Mitas, A.W.2020Acta of bioengineering and biomechanics-
Numerical study of the use of Tyre-derived-aggregate (TDA) as the backfill above flexible PVC pipelineKliszczewicz, B.| Kowalska, M.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032044
The influence of the data packet size on positioning parameters of UWB system for the purpose of tagging smart city infrastructureHanzel, K.| Paszek, K.| Grzechca, D.2020Bulletin of the Polish Academy of Sciences: Technical Sciences10.24425/bpasts.2020.134173
Speaker verification with TIMIT corpus-some remarks on classical methodsDustor, A.2020Signal Processing - Algorithms, Architectures, Arrangements, and Applications Conference Proceedings, SPA-
Manufacturing of lightweight aggregates as an auspicious method of sewage sludge utilizationKorol, J.| Głodniok, M.| Hejna, A.| Pawlik, T.| Chmielnicki, B.| Bondaruk, J.2020Materials10.3390/ma13245635
Passive Fetal Monitoring by Advanced Signal Processing Methods in Fetal PhonocardiographyMartinek, R.| Barnova, K.| Jaros, R.| Kahankova, R.| Kupka, T.| Jezewski, M.| Czabanski, R.| Matonia, A.| Jezewski, J.| Horoba, K.2020IEEE Access10.1109/ACCESS.2020.3043496
Quasi-static loading of piping welded jointsKlimpel, A.| Herbuś, K.| Ociepka, P.| Timofiejczuk, A.| Pedot, M.2020International Journal of Modern Manufacturing Technologies-
Comparison of selective laser centrifugal casting and sintering technologies in manufacturing of personalized jawbones fixation platesŻmudzki, J.| Bobik, G.| Chladek, G.| Malara, P.| Adamiak, M.| Król, M.| Kwieciński, K.| Popielski, P.| Duraj, E.| Tański, T.2020International Journal of Modern Manufacturing Technologies-
Comparison of machine learning algorithms for structure state prediction in operational load monitoringMucha, W.2020Sensors (Switzerland)10.3390/s20247087
Analysis of the R744 flow through the ejector ducts on the basis of visualisation procedure at the dedicated laboratory test rigBodys, J.| Palacz, M.| Haida, M.| Smolka, J.| Nowak, A.J.2020Refrigeration Science and Technology10.18462/iir.gl.2020.1038
Research of influence of bed joints reinforcement on strength of masonry shear walls with openings made of calcium silicate masonry unitsJasiński, R.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/2/022085
Effect of elevated deformation temperatures on microstructural and tensile behavior of si-al alloyed trip-aided steelKozłowska, A.| Grajcar, A.2020Materials10.3390/ma13225284
Design, manufacturing technology and in-vitro evaluation of original, polyurethane, petal valves for application in pulsating ventricular assist devicesMajor, R.| Gawlikowski, M.| Sanak, M.| Lackner, J.M.| Kapis, A.2020Polymers10.3390/polym12122986
The influence of technological parameters as the handling and sintering process on the structure of iron based powdersStanula, A.| Pilarczyk, W.| Jager, M.| Wilk, T.2020METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings10.37904/metal.2020.3626
Dilatometric analysis of the austenite decomposition in undeformed and deformed low-carbon structural steelMorawiec, M.| Skowronek, A.| Król, M.| Grajcar, A.2020Materials10.3390/ma13235443
Modeling of fuel consumption using artificial neural networksWITASZEK, K.2020Diagnostyka10.29354/diag/130610
Gyrocardiography: A review of the definition, history, waveform description, and applicationsSieciński, S.| Kostka, P.S.| Tkacz, E.J.2020Sensors (Switzerland)10.3390/s20226675
In-vitro biocompatibility and hemocompatibility study of new pet copolyesters intended for heart assist devicesGawlikowski, M.| Fray, M.E.| Janiczak, K.| Zawidlak-Węgrzyńska, B.| Kustosz, R.2020Polymers10.3390/polym12122857
The structure of thermally reduced graphene oxideDrewniak, S.| Muzyka, R.| Drewniak, Ł.2020Photonics Letters of Poland10.4302/plp.v12i2.1021
Heuristic-based feature selection for rough set approachStańczyk, U.| Zielosko, B.2020International Journal of Approximate Reasoning10.1016/j.ijar.2020.07.005
Atomic layer deposition of TiO2 blocking layers for dye-sensitized solar cellsDrygała, A.| Szindler, M.| Szindler, M.| Jonda, E.2020Microelectronics International10.1108/MI-01-2020-0007
Automated detection of sleep stages using deep learning techniques: A systematic review of the last decade (2010–2020)Loh, H.W.| Ooi, C.P.| Vicnesh, J.| Oh, S.L.| Faust, O.| Gertych, A.| Rajendra Acharya, U.2020Applied Sciences (Switzerland)10.3390/app10248963
Magnetic Elements for Neuromorphic ComputingBlachowicz, T.| Ehrmann, A.2020Molecules (Basel, Switzerland)10.3390/molecules25112550
Hybrid welding of steel 4330VZuk, M.| Wygldacz, B.| Stano, S.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/916/1/012125
Actions for reduction of the environmental impact of public transport in the górnośląsko-zagłębiowska metropolisBociąga, B.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-34069-8_5
Exponential stability of non-linear stochastic delay differential system with generalized delay-dependent impulsive pointsRengamannar, K.| Balakrishnan, G.P.| Palanisamy, M.| Niezabitowski, M.2020Applied Mathematics and Computation10.1016/j.amc.2020.125344
Heat treatment strategies for hot-rolled medium-Mn sheet steelsGrajcar, A.| Morawiec, M.| Skowronek, A.| Dykas, J.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/723/1/012008
Bifilm defects in Ti-inoculated chromium white cast ironDojka, M.| Stawarz, M.2020Materials10.3390/ma13143124
Computer-aided therapeutic diagnosis for anorexiaSpinczyk, D.| Bas, M.| Dziecia¸tko, M.| MaćKowski, M.| Rojewska, K.| MaćKowska, S.2020BioMedical Engineering Online10.1186/s12938-020-00798-9
Some New Facts About (Pseudo) Involutions in the Riordan GroupSłowik, R.2020Indian Journal of Pure and Applied Mathematics10.1007/s13226-020-0496-3
PrefaceGruca, A.| Czachórski, T.| Deorowicz, S.| Harężlak, K.| Piotrowska, A.2020Advances in Intelligent Systems and Computing-
Microstructure and mechanical properties of Co-Cr-Mo-Si-Y-Zr high entropy alloyGlowka, K.| Zubko, M.| Świec, P.| Prusik, K.| Albrecht, R.| Dercz, G.| Loskot, J.| Witala, B.| Stróż, D.2020Metals10.3390/met10111456
Analysis and Experimental Investigation of 3D Printed Electric Motor with Permanent MagnetsStakhiv, H.| Solomchak, O.| Stepien, M.| Lasek, P.20202020 11th International Conference on Electrical Power Drive Systems, ICEPDS 2020 - Proceedings10.1109/ICEPDS47235.2020.9249306
The search for assembly line balance oriented on the allocation of quality control pointsBysko, S.| Krystek, J.| Bysko, S.| Majchrowicz, K.20202020 6th International Conference on Control, Automation and Robotics, ICCAR 202010.1109/ICCAR49639.2020.9107982
Applying digital tools as an effective support for conservation research and design process: The rocca janula castle in cassino, LazioWałek, M.2020Archeologia e Calcolatori10.19282/ac.31.2.2020.23
Assessment of the piezoelectric response of an epoxy resin/sbsinanowires composite filling fdm printed gridKozioł, M.| Szperlich, P.| Toroń, B.| Olesik, P.| Jesionek, M.2020Materials10.3390/ma13225281
Dynamic response of the spherical pendulum subjected to horizontal Lissajous excitationLitak, G.| Margielewicz, J.| Gąska, D.| Yurchenko, D.| Dąbek, K.2020Nonlinear Dynamics10.1007/s11071-020-06023-5
Synthesis of active LTV elementsPiwowar, A.| Walczak, J.2020Archives of Electrical Engineering10.24425/aee.2020.133914
PrefaceBurczyński, T.| Kuś, W.| Beluch, W.| Długosz, A.| Poteralski, A.| Szczepanik, M.2020Solid Mechanics and its Applications-
Measurements based analysis of the proton exchange membrane fuel cell operation in transient state and power of own needs †Wilk, A.| Wecel, D.2020Energies10.3390/en13020498
Computer Simulation of Thermal Processing of SteelSmoljan, B.| Iljkic, D.| Hajdek, K.| Sitek, W.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/916/1/012106
A concept of conventional or mixed bus fleet conversion with electric vehicles: A planning processKrawiec, K.2020International Journal of Electrical and Electronic Engineering and Telecommunications10.18178/ijeetc.9.1.8-12
Analysis of Dustiness State in a Driven Underground Dog Heading Ventilating by Auxiliary Air-DuctBrodny, J.| Tutak, M.2020Management Systems in Production Engineering10.2478/mspe-2020-0011
Fuzzy system as a method of controlling LEGO Linefollower vehicle using C# programming languageGrzesica, K.| Wadas, J.2020CEUR Workshop Proceedings-
Increasing the efficiency of text input in the 8pen methodDobosz, K.| Pindel, M.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-58805-2_42
The investigation on the ideal spot weld numerical model in resistance weldingMikno, Z.| Grzesik, B.| Stępień, M.2020International Journal of Advanced Manufacturing Technology10.1007/s00170-020-06114-y
Mechanical properties of dissimilar metal butt jointCzupryński, A.| Musztyfaga-Staszuk, M.| Szymura, M.| Monica, Z.2020International Journal of Modern Manufacturing Technologies-
An insight into ionic conductivity of polyaniline thin filmsChulkin, P.| Łapkowski, M.2020Materials10.3390/ma13122877
Increasing the resource of milling cutters used to process the locomotive wheelsets. part 2: Study of stressed-deformed stateSładkowski, A.| Proydak, Y.| Ruban, V.2020Transport Problems10.21307/TP-2020-040
Optimization of warehouse operations with genetic algorithmsKordos, M.| Boryczko, J.| Blachnik, M.| Golak, S.2020Applied Sciences (Switzerland)10.3390/app10144817
HSP70/IL-2 treated NK cells effectively cross the blood brain barrier and target tumor cells in a rat model of induced glioblastoma multiforme (GBM)Sharifzad, F.| Mardpour, S.| Mardpour, S.| Fakharian, E.| Taghikhani, A.| Sharifzad, A.| Kiani, S.| Heydarian, Y.| Łos, M.J.| Azizi, Z.| Ghavami, S.| Hamidieh, A.A.| Ebrahimi, M.2020International Journal of Molecular Sciences10.3390/ijms21072263
Analysis of stress-strain states in the vicinity of mining excavations in a rock mass with variable mechanical propertiesJendryś, M.| Duży, S.| Dyduch, G.2020Energies10.3390/en13215567
Geodesic rays, the “Lion-Man” game, and the fixed point propertyLópez-Acedo, G.| Nicolae, A.| Piątek, B.2020Journal of Mathematical Analysis and Applications10.1016/j.jmaa.2020.123948
Examples of even lifting of structural elements of existing buildingsGromysz, K.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032050
Recognition of drivers’ activity based on 1d convolutional neural networkDoniec, R.J.| Sieciński, S.| Duraj, K.M.| Piaseczna, N.J.| Mocny-Pachońska, K.| Tkacz, E.J.2020Electronics (Switzerland)10.3390/electronics9122002
Non-standard T6 heat treatment of the casting of the combustion engine cylinder headPezda, J.| Jezierski, J.2020Materials10.3390/ma13184114
Intracranial hemorrhage detection in head CT using double-branch convolutional neural network, support vector machine, and random forestSage, A.| Badura, P.2020Applied Sciences (Switzerland)10.3390/app10217577
On Stabilizability of Discrete Time Systems with Delay in ControlBabiarz, A.| Czornik, A.| Klamka, J.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-41964-6_16
Cell Cycle as a Fault Tolerant Control SystemSmieja, J.| Swierniak, A.| Jaksik, R.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_47
The development of precipitate characteristics by the selection of a reactor type and fluid-dynamic conditionsStec, M.| Synowiec, P.M.| Bunikowska, B.2020Chemical Engineering Journal10.1016/j.cej.2020.124697
Impact of the imperfection of thermal insulation on structural changes of thin-layer façade claddings in ETICSŚlusarek, J.| Orlik-Kożdoń, B.| Bochen, J.| Muzyczuk, T.2020Journal of Building Engineering10.1016/j.jobe.2020.101487
Electrochemically deposited poly(selenophene)-fullerene photoactive layer: Tuning of the spectroscopic properties towards visible light-driven generation of singlet oxygenNyga, A.| Motyka, R.| Bussetti, G.| Calloni, A.| Sangarashettyhalli Jagadeesh, M.| Fijak, S.| Pluczyk-Malek, S.| Data, P.| Blacha-Grzechnik, A.2020Applied Surface Science10.1016/j.apsusc.2020.146594
Simulation of properties of dissimilar welded joints of duplex 2205 and austenitic 316l steelsTopolska, S.| Gwiazda, A.2020International Journal of Modern Manufacturing Technologies-
Morphic arrangement of high flexibility and aspect ratio wingSkarka, W.| Ciomperlik, N.2020Advances in Transdisciplinary Engineering10.3233/ATDE200107
Thermal parameters of roofing slates from Czech RepublicLabus, M.| Labus, K.| Bujok, P.2020Journal of Thermal Analysis and Calorimetry10.1007/s10973-019-08969-0
Physical simulation and dilatometric study of double-step heat treatment of medium-Mn steelSkowronek, A.| Morawiec, M.| Ruiz-Jimenez, V.| Garcia-Mateo, C.| Grajcar, A.2020Archives of Civil and Mechanical Engineering10.1007/s43452-020-00144-9
CFD analysis of pressure drops within riffled pipes of vertical ground heat exchangerNowak, A.J.| Smolka, J.| Palacz, M.| Haida, M.| Wos, J.2020Proceedings of the 6th European Conference on Computational Mechanics: Solids, Structures and Coupled Problems, ECCM 2018 and 7th European Conference on Computational Fluid Dynamics, ECFD 2018-
Application of numerical methods for automatic intrinsic safety analysis according to IEC 60079-11Adrikowski, T.| Bula, D.| Pasko, M.20202020 Progress in Applied Electrical Engineering, PAEE 202010.1109/PAEE50669.2020.9158749
Deceleration and deformation during dynamic loading of model car body parts after post-accident repairHadrys, D.| Kubik, A.| Stanik, Z.2020Transport Problems10.21307/TP-2020-029
Differences in gene expression profile of primary tumors in metastatic and non‐metastatic papillary thyroid carcinoma—do they exist?Szpak‐ulczok, S.| Pfeifer, A.| Rusinek, D.| Oczko‐wojciechowska, M.| Kowalska, M.| Tyszkiewicz, T.| Cieslicka, M.| Handkiewicz‐junak, D.| Fujarewicz, K.| Lange, D.| Chmielik, E.| Zembala‐nozynska, E.| Student, S.| Kotecka‐blicharz, A.| Kluczewska‐galka, A.| Jarzab, B.| Czarniecka, A.| Jarzab, M.| Krajewska, J.2020International Journal of Molecular Sciences10.3390/ijms21134629
Assessment of material durability of steam pipelines based on statistical analysis of strength properties - Selected modelsPiątkowski, J.| Gajdzik, B.| Mesjasz, A.2020Energies10.3390/en13143633
Effect of TIG welding and rare earth elements alloying on corrosion resistance of magnesium alloysNowak, P.| Mosiałek, M.| Kharitonov, D.S.| Adamiec, J.| Turowska, A.2020Journal of the Electrochemical Society10.1149/1945-7111/abb97e
Modeling of vibroacoustic phenomena using the method of parameterizing the audio signalPaszkowski, W.2020Eksploatacja i Niezawodnosc10.17531/ein.2020.3.13
The effect of zno/nio nanocomposite on the properties of a photoelectrode of a dye sensitized solar cellSzindler, M.| Szindler, M.M.2020Digest Journal of Nanomaterials and Biostructures-
State Machine of a Redundant Computing Unit Operating as a Cyber-Physical System Control Node with Hot-Standby RedundancyStój, J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-30604-5_7
The microstructure and creep properties of as-cast Mg-Sn-Si-(Al) magnesium alloysRzychoń, T.2020Archives of Civil and Mechanical Engineering10.1007/s43452-020-00101-6
Numerical verification of the elastic-plastic Menétrey-William model (M-W-3) for masonry shear walls made of calcium silicate masonry unitsJasiński, R.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/2/022086
Intelligent Computing TechniquesBurczyński, T.| Kuś, W.| Beluch, W.| Długosz, A.| Poteralski, A.| Szczepanik, M.2020Solid Mechanics and its Applications10.1007/978-3-030-34161-9_3
Design of polymer membrane morphology with prescribed structure and diffusion propertiesStrzelewicz, A.| Krasowska, M.| Dudek, G.| Cieśla, M.2020Chemical Physics10.1016/j.chemphys.2019.110662
Evaluation of electricity generation subsystem of power-to-gas-to-power unit using gas expander and heat recovery steam generatorKatla, D.| Bartela, Ł.| Skorek-Osikowska, A.2020Energy10.1016/j.energy.2020.118600
Heuristic Search of Exact Biclusters in Binary DataMichalak, M.| Jaksik, R.| Slȩzak, D.2020International Journal of Applied Mathematics and Computer Science10.34768/amcs-2020-0013
Analysis of ultrashort laser pulse irradiation with 2D thin metal films using the fuzzy lattice Boltzmann methodPiasecka-Belkhayat, A.| Korczak, A.2020Journal of Theoretical and Applied Mechanics (Poland)10.15632/jtm-pl/115448
Selected physicochemical properties of diamond like carbon (DLC) coating on ti-13nb-13zr alloy used for blood contacting implantsAntonowicz, M.| Kurpanik, R.| Walke, W.| Basiaga, M.| Sondor, J.| Paszenda, Z.2020Materials10.3390/ma13225077
Ensembles of Active Adaptive Incremental ClassifiersKozielski, M.| Kozieł, K.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_7
Analysis of the influence of transient state of the overhead pipeline placed in an open-air space on the accuracy of its insulation assessment based on the results of outer shell thermovision diagnosticsKruczek, T.2020Journal of Energy Resources Technology, Transactions of the ASME10.1115/1.4044808
Structural Intelligent OptimizationBurczyński, T.| Kuś, W.| Beluch, W.| Długosz, A.| Poteralski, A.| Szczepanik, M.2020Solid Mechanics and its Applications10.1007/978-3-030-34161-9_4
Interactions between tram passengers and road vehicles at tram stops - A pilot studySoczówka, P.| Żochowska, R.2020Transactions on Transport Sciences10.5507/TOTS.2020.007
Effects of short- and long-term exposure to cadmium on salivary glands and fat body of soil centipede Lithobius forficatus (Myriapoda, Chilopoda): Histology and ultrastructureRost-Roszkowska, M.| Poprawa, I.| Chajec| Chachulska-Żymełka, A.| Leśniewska, M.| Student, S.2020Micron10.1016/j.micron.2020.102915
Microstructure and cyclic oxidation resistance of Si-aluminide coatings on γ-TiAl at 850 °CSwadźba, R.| Swadźba, L.| Mendala, B.| Bauer, P.-P.| Laska, N.| Schulz, U.2020Surface and Coatings Technology10.1016/j.surfcoat.2020.126361
Electroluminescent optical fiber sensor for detection of a high intensity electric fieldPustelny, T.2020Photonics Letters of Poland10.4302/plp.v12i1.980
A Review on the Vehicle to Vehicle and Vehicle to Infrastructure CommunicationTokarz, K.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_5
Optimization of ferrite stainless steel mechanical properties prediction with artificial intelligence algorithmsHonysz, R.2020Archives of Metallurgy and Materials10.24425/amm.2020.132815
Evaluation of structure and corrosion behavior of FeAl alloy after crystallization, hot extrusion and hot rollingCebulski, J.| Pasek, D.| Chmiela, B.| Popczyk, M.| Swinarew, A.S.| Stanula, A.| Waśkiewicz, Z.| Knechtle, B.2020Materials10.3390/MA13092041
The examination of hydrated cement paste made of CEM III/A 42,5 N-LH/HSR/NA under the influence of urea solutionSłomka-Słupik, B.2020Materials10.3390/ma13214984
The effect of the gaseous environment on the electrical conductivity of multi-walled carbon nanotube films over a wide temperature rangeJanas, D.| Koziol, K.K.2020Materials10.3390/ma13030510
The Synthesis of α-Aminophosphonates via Enantioselective Organocatalytic Reaction of 1-(N-Acylamino)alkylphosphonium Salts with Dimethyl PhosphiteWalęcka-Kurczyk, A.| Walczak, K.| Kuźnik, A.| Stecko, S.| Październiok-Holewa, A.2020Molecules10.3390/molecules25020405
N-hydroxyphthalimide on a polystyrene support coated with Co(II)-containing ionic liquid as a new catalytic system for solvent-free ethylbenzene oxidationTalik, G.| Osial, A.| Grymel, M.| Orlińska, B.2020Catalysts10.3390/catal10121367
Supramolecular Solvent-Based Microextraction of Selected Anticonvulsant and Nonsteroidal Anti-Inflammatory Drugs from Sediment SamplesBajkacz, S.| Adamczewska, P.| Kokoszka, K.| Kycia-Słocka, E.| Sochacki, A.| Felis, E.2020Molecules (Basel, Switzerland)10.3390/molecules25235671
Business process modeling for flexible tasks workflowOlender, M.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/916/1/012079
New method for beat-to-beat fetal heart rate measurement using doppler ultrasound signalKupka, T.| Matonia, A.| Jezewski, M.| Jezewski, J.| Horoba, K.| Wrobel, J.| Czabanski, R.| Martinek, R.2020Sensors (Switzerland)10.3390/s20154079
Application of the monte carlo method to evaluate the impact of uncertainty of model parameters on the time of concrete cover damageKrykowski, T.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/4/042002
Evaluation of Technological Options for Carbon Dioxide UtilizationKalina, J.| Skorek-Osikowska, A.| Bartela, L.| Gładysz, P.| Lampert, K.2020Journal of Energy Resources Technology, Transactions of the ASME10.1115/1.4047466
Examination of the sliding wear of bronze coatings on railway buffer headsGamon, W.| Aniołek, K.2020Wear10.1016/j.wear.2020.203235
Automatic Control and Feedback Loops in Biology and MedicineSmieja, J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-13273-6_1
Vision System for a Cell with a KUKA RobotGłȩbocki, S.| Babiarz, A.2020Communications in Computer and Information Science10.1007/978-981-15-3380-8_39
Evaluation of the MRI Images Matching Using Normalized Mutual Information Method and Preprocessing TechniquesBzowski, P.| Borys, D.| Guz, W.| Obuchowicz, R.| Piórkowski, A.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31254-1_12
Structure–bioavailability relationship study of genistein derivatives with antiproliferative activity on human cancer cellPapaj, K.| Kasprzycka, A.| Góra, A.| Grajoszek, A.| Rzepecka, G.| Stojko, J.| Barski, J.-J.| Szeja, W.| Rusin, A.2020Journal of Pharmaceutical and Biomedical Analysis10.1016/j.jpba.2020.113216
Size-dependent growth kinetics of struvite crystals in wastewater with calcium ionsHutnik, N.| Stanclik, A.| Piotrowski, K.| Matynia, A.2020Open Chemistry10.1515/chem-2020-0015
Numerical determination of wind forces acting on structural elements in the shape of a curved pipePadewska-Jurczak, A.| Szczepaniak, P.| Buliński, Z.2020Wind and Structures, An International Journal10.12989/was.2020.30.1.015
Scratch testing of AlSi12/SiCp composite layer with high share of reinforcing phase formed in the centrifugal casting processDolata, A.J.| Mróz, M.| Dyzia, M.| Jacek-Burek, M.2020Materials10.3390/ma13071685
Simulation of stress distribution in the weld of a dissimilar jointGwiazda, A.| Topolska, S.2020International Journal of Modern Manufacturing Technologies-
Study on maximum phonons in selected glass and glass-ceramics doped with rare-earth ions. The optimal and neutral maximum phononKoepke, C.| Wisniewski, K.| Środa, M.| Żelechower, M.2020Journal of Alloys and Compounds10.1016/j.jallcom.2020.154091
Connecting concrete technology and machine learning: Proposal for application of ANNs and CNT/concrete composites in structural health monitoringKekez, S.| Kubica, J.2020RSC Advances10.1039/d0ra03450a
Automation of teaching processes on e-learning platforms using recommender systemsAlbiniak, M.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-29516-5_81
Editorial – CPOTE 2018 Energy Conversion and Management SIStanek, W.| Kostowski, W.| Gładysz, P.2020Energy Conversion and Management10.1016/j.enconman.2020.112480
Impact of passive cooling on thermal comfort in a single-family building for current and future climate conditionsGrygierek, K.| Sarna, I.2020Energies10.3390/en13205332
HVDC station voltage harmonic analysis in changing network conditionsPrzygrodzki, M.| Rzepka, P.| Szablicki, M.| Wakulinski, L.2020Proceeding of the International Conference on Electrical Power Quality and Utilisation, EPQU10.1109/EPQU50182.2020.9220320
The Use of a Laser to Measure the Speed of a Production LineMusielak, S.K.| Kasprzyk, J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_64
Mechanistic-experimental approach for determination of basic properties of mechanically stabilized layersRakowski, Z.| Kawalec, J.| Horníček, L.| Kwiecień, S.2020Lecture Notes in Civil Engineering10.1007/978-981-15-0454-9_5
Enhancing electrical conductivity of composites of single-walled carbon nanotubes and ethyl cellulose with water vaporRdest, M.| Janas, D.2020Materials10.3390/ma13245764
Analysis of the calcium phosphate-based hybrid layer formed on a ti-6al-7nb alloy to enhance the ossseointegration processKazek-Kęsik, A.| Djurado, D.| Pouget, S.| Blacha-Grzechnik, A.| Kalemba-Rec, I.| Simka, W.2020Materials10.3390/ma13235468
Thermal analysis of W-free Co–(Ni)–Al–Mo–Nb superalloysMigas, D.| Moskal, G.| Maciąg, T.2020Journal of Thermal Analysis and Calorimetry10.1007/s10973-020-09375-7
The effect of alloying bath additives on the corrosion resistance of zinc coatings obtained on reinforcing steelSaternus, M.| Sipa, J.| Kania, H.2020Ochrona Przed Korozja10.15199/40.2020.5.1
Superplastic deformation of al–cu alloys after grain refinement by extrusion combined with reversible torsionRodak, K.| Kuc, D.| Mikuszewski, T.2020Materials10.3390/ma13245803
Influence of selected hydromechanical parameters of wedm machine on quality and cutting performanceŁomozik, Ł.| Bąkowski, H.| Sokołowski, A.2020International Journal of Modern Manufacturing Technologies-
Research project and concept design of the spatial development of the area earmarked for recreational functions in Mysłowice-Kosztowy in PolandWinnicka - Jasłowska, D.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/2/022079
Structural and Biological Assessment of Mg Alloy Surface after Plasma Electrolytic Oxidation in Different SolutionsHusak, Y.| Kornienko, V.| Simka, W.| Oleshko, O.| Oleshko, T.| Dryhval, B.| Dudko, J.| Pogorielov, M.2020Proceedings of the 2020 IEEE 10th International Conference on Nanomaterials: Applications and Properties10.1109/NAP51477.2020.9309693
Fate of antifungal drugs climbazole and fluconazole in constructed wetlands - Diastereoselective transformation indicates process conditionsSochacki, A.| Marsik, P.| Chen, Z.| Sisa, M.| Vymazal, J.2020Chemical Engineering Journal10.1016/j.cej.2020.127783
Modelling of production process using multiple ant colony approachGwiazda, A.| Banaś, W.| Sękala, A.| Topolska, S.| Hryniewicz, P.2020International Journal of Modern Manufacturing Technologies-
Isokinetic analysis of Fe41Co7Cr15Mo14Y2C15B6 bulk metallic glass: Effect of minor copper additionRezaei-Shahreza, P.| Seifoddini, A.| Hasani, S.| Jaafari, Z.| Śliwa, A.| Nabiałek, M.2020Materials10.3390/MA13173704
Uniform Asymptotic Stabilization of Affine Periodic Discrete-Time SystemsCzornik, A.| Makarov, E.| Niezabitowski, M.| Popova, S.| Zaitsev, V.2020Proceedings of the IEEE Conference on Decision and Control10.1109/CDC42340.2020.9304253
Non-equilibrium approach in simulations of the R744 flow through the motive nozzle of the two-phase ejectorBodys, J.| Smolka, J.| Palacz, M.| Haida, M.| Banasiak, K.2020Refrigeration Science and Technology10.18462/iir.gl.2020.1039
Conditions for the Innovation Activities of Energy Sector Enterprises Shown on the Example of Mining CompaniesRanosz, R.| Bluszcz, A.| Kowal, D.2020International Journal of Electrical and Computer Engineering Systems10.29227/IM-2020-01-82
Numerical modelling and measurements of temperature for tests of structural transformations in steels under welding conditionsMikno, Z.| Stępień, M.| Grzesik, B.2020Archives of Metallurgy and Materials10.24425/amm.2020.133707
Crystallization behavior of ternary γ–γ′ Co–Al–W alloyMigas, D.| Gradoń, P.| Mikuszewski, T.| Moskal, G.2020Journal of Thermal Analysis and Calorimetry10.1007/s10973-020-10279-9
Aluminum alloy welding in automotive industrySzczucka-Lasota, B.| Wegrzyn, T.| Jurek, A.2020Transport Problems10.21307/TP-2020-034
Historic building thermal diagnostics algorithm presented for the example of a townhouse in LvivOrlik-Kożdoń, B.| Radziszewska-Zielina, E.| Fedorczak-Cisak, M.| Steidl, T.| Białkiewicz, A.| Żychowska, M.| Muzychak, A.2020Energies10.3390/en13205374
Roundabout users subjective safety - Case study from upper silesian and masovian voivodeships (Poland)Macioszek, E.| Kurek, A.2020Transactions on Transport Sciences10.5507/TOTS.2020.009
Analysis of influence of components in supplying path of resistance welding machine on parameters of welding processStępień, M.| Mikno, Z.| Grzesik, B.2020Przeglad Elektrotechniczny10.15199/48.2020.07.13
Effect of hot deformation on phase transformation kinetics in isothermally annealed 3mn-1.6al steelSkowronek, A.| Morawiec, M.| Kozłowska, A.| Pakieła, W.2020Materials10.3390/ma13245817
Dilatometric study of the phase transformations under conditions of recrystallized and non-recrystallized austenite in 3Mn–1.5Al steelMorawiec, M.| Grajcar, A.| Kozłowska, A.| Zalecki, W.| Burian, W.2020Journal of Thermal Analysis and Calorimetry10.1007/s10973-020-10409-3
Finding the optimal boat direction using heuristicsSzlachta, B.| Rusin, K.2020CEUR Workshop Proceedings-
Bioengineering of Cytochrome P450 OleTJE: How Does Substrate Positioning Affect the Product Distributions?Reinhard, F.G.C.| Lin, Y.-T.| Stańczak, A.| de Visser, S.P.2020Molecules (Basel, Switzerland)10.3390/molecules25112675
Main defects observed in titanium grade ii and 316l stainless steel elements obtained by selective laser meltingWoźniak, A.| Adamiak, M.2020Solid State Phenomena10.4028/www.scientific.net/SSP.308.33
Siloxanes—versatile materials for surface functionalisation and graft copolymersGlosz, K.| Stolarczyk, A.| Jarosz, T.2020International Journal of Molecular Sciences10.3390/ijms21176387
Analysis of critical gap times and follow-up times at selected, median, uncontrolled t-intersections differentiated by the nature of the surroundingBarchański, A.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-34069-8_19
Estimating the Performance Indicators of Promotion Efficiency in FMCG RetailBlachnik, M.| Henzel, J.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-63833-7_27
Methodology for measuring the gap size using a fiber-optic displacement sensor exemplified by a centrifugal blood pumpGawlikowski, M.| Kurtyka, P.| Zalewski, J.| Zarwańska-Doffek, M.| Kapis, A.2020Photonics Letters of Poland10.4302/plp.v12i2.1017
6G-enabled IoT Home Environment control using Fuzzy RulesWozniak, M.| Zielonka, A.| Sikora, A.| Piran, M.J.| Alamri, A.2020IEEE Internet of Things Journal10.1109/JIOT.2020.3044940
Study of optical and dielectric constants of hybrid SnO2 electrospun nanostructuresMatysiak, W.| Tański, T.| Smok, W.2020Applied Physics A: Materials Science and Processing10.1007/s00339-020-3283-4
Using the lstm network to forecast the demand for electricity in polandManowska, A.2020Applied Sciences (Switzerland)10.3390/app10238455
Analysis of supply parameters of single- And double-string LED lamps with integrated AC direct capacitorless driversChęciński, J.| Filus, Z.2020Bulletin of the Polish Academy of Sciences: Technical Sciences10.24425/bpasts.2020.134188
Experimental and modelling research on coach passengers’ safety in frontal impactsJamroziak, K.| Joszko, K.| Wolanski, W.| Gzik, M.| Burkacki, M.| Suchon, S.| Szarek, A.| Zielonka, K.2020Archives of Civil and Mechanical Engineering10.1007/s43452-020-00103-4
3D spatial dependencies study in the Hawk and Dove modelSwierniak, A.| Bonk, M.| Borys, D.2020BIOINFORMATICS 2020 - 11th International Conference on Bioinformatics Models, Methods and Algorithms, Proceedings; Part of 13th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2020-
A System for Measuring Generator Load AnglePaszek, S.| Boboń, A.| Berhausen, S.| Majka, Ł.| Nocoń, A.| Pruski, P.2020Lecture Notes in Electrical Engineering10.1007/978-3-030-37976-6_6
Numerical analysis on the effectiveness of Gurney flaps as power augmentation devices for airfoils subject to a continuous variation of the angle of attack by use of full and surrogate modelsWiśniewski, P.| Balduzzi, F.| Buliński, Z.| Bianchini, A.2020Energies10.3390/en13081877
Numerical analysis of planar multimode optical sensor with active nanolayerBłahut, M.2020Optica Applicata10.37190/OA200304
Residual Error Shaping in Active Noise Control - A Case StudyMichalczyk, M.I.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_60
LCR-BLAST—A New Modification of BLAST to Search for Similar Low Complexity Regions in Protein SequencesJarnot, P.| Ziemska-Legięcka, J.| Grynberg, M.| Gruca, A.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_16
Biocompatibility and antibacterial properties of zno-incorporated anodic oxide coatings on TiZrNb alloyOleshko, O.| Husak, Y.| Korniienko, V.| Pshenychnyi, R.| Varava, Y.| Kalinkevich, O.| Pisarek, M.| Grundsteins, K.| Pogorielova, O.| Mishchenko, O.| Simka, W.| Viter, R.| Pogorielov, M.2020Nanomaterials10.3390/nano10122401
Fuzzy system model for insurance industryTatarczyk, K.2020CEUR Workshop Proceedings-
A motion simulation of a technical mean using elements of a flexible body typeHerbuś, K.| Ociepka, P.2020International Journal of Modern Manufacturing Technologies-
Nondestructive, real time technique for in-plane heat diffusivity measurementsAdamczyk, W.| Białecki, R.| Orlande, H.R.B.| Ostrowski, Z.2020International Journal of Heat and Mass Transfer10.1016/j.ijheatmasstransfer.2020.119659
In search of new therapeutics—molecular aspects of the pcos pathophysiology: Genetics, hormones, metabolism and beyondWawrzkiewicz-Jałowiecka, A.| Kowalczyk, K.| Trybek, P.| Jarosz, T.| Radosz, P.| Setlak, M.| Madej, P.2020International Journal of Molecular Sciences10.3390/ijms21197054
Verification of flutter method for the purposes of building a very flexible wing generative modelZenowicz, K.| Skarka, W.2020Advances in Transdisciplinary Engineering10.3233/ATDE200097
Implementing inclusive design in architectural education and design practiceSzewczenko, A.| Widzisz-Pronobis, S.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/2/022015
Synthesis and Generation of Random Fields in Nonlinear EnvironmentFigwer, J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_56
SURF Algorithm with Convolutional Neural Network as Face Recognition TechniqueWinnicka, A.| Kęsik, K.| Połap, D.| Woźniak, M.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-61534-5_9
PrefaceStapor, K.2020Intelligent Systems Reference Library-
The effect of the strengthening of aac masonry walls using frcm systemDrobiec, Ł.| Jasiński, R.| Mazur, W.| Jokiel, R.2020Cement, Wapno, Beton10.32047/CWB.2020.25.5.4
PrefaceGaj, P.| Gumiński, W.| Kwiecień, A.2020Communications in Computer and Information Science-
Laser thermal oxidation by ytterbium-doped fibre laser of the hot and cold-rolled stainless steel surfaceBrytan, Z.| Pakieła, W.2020Solid State Phenomena10.4028/www.scientific.net/SSP.308.100
An experimental/numerical hydrothermal-Second law analysis of a finned/tubular heat exchanger using Bhatnagar–Gross–Krook Lattice Boltzmann (BGKLBM) and rheological-thermal behavior of Fe2O3-waterHejri, S.| Kamali, D.| Hasani Malekshah, E.2020International Journal of Numerical Methods for Heat and Fluid Flow10.1108/HFF-08-2020-0497
Thin SnO2 films manufactured via the sol-gel and electrospinning methodsMatysiak, W.| Tański, T.| Smok, W.| Polishchuk, O.2020Archives of Metallurgy and Materials10.24425/amm.2020.132817
Technology mapping of FSM oriented to LUT-based FPGAKubica, M.| Kania, D.2020Applied Sciences (Switzerland)10.3390/app10113926
Damage detection in four point bending test on benchmark RC structure using feature based fusionChakraborty, J.| Katunin, A.| Salamak, M.| Klikowicz, P.| Stolinski, M.2020Procedia Structural Integrity10.1016/j.prostr.2020.04.037
An organic–inorganic hybrid nanocomposite as a potential new biological agentDulski, M.| Malarz, K.| Kuczak, M.| Dudek, K.| Matus, K.| Sułowicz, S.| Mrozek-Wilczkiewicz, A.| Nowak, A.2020Nanomaterials10.3390/nano10122551
Issues on Performance of Reactive Programming in the Java Ecosystem with Persistent Data SourcesWycislik, L.| Ogorek, L.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_24
Study of gasless compositions used in time-delay elements: Fe/BaO2 compositionGerlich, M.M.| Wojewódka, A.T.2020Journal of Thermal Analysis and Calorimetry10.1007/s10973-019-08721-8
Spectral analysis of macro-fiber composites measured vibration of double-panel structure coupled with solenoidsChraponska, A.| Rzepecki, J.| Isaac, C.W.| Mazur, K.| Pawelczyk, M.2020Sensors (Switzerland)10.3390/s20123505
Analysis of causes of cracks and corrosion of reinforced concrete walls and balcony slabs in a multi-storey building with an upward extensionJaśniok, M.| Jaśniok, T.2020Ochrona Przed Korozja10.15199/40.2020.3.2
Rheotaxially grown and vacuum oxidized SnOx nanolayers for NO2 sensing characteristics at Ppb level and room temperatureLyson-sypien, B.| Kwoka, M.2020Sensors (Switzerland)10.3390/s20051323
Lead and zinc removal from alloy zn-ag-pb under reduced pressureŁabaj, J.| Blacha, L.2020Metalurgija-
Guest Editorial: Heterogeneous Industrial Networks of the Current and Next-Generation FactoriesGaj, P.| Scanzio, S.| Wisniewski, L.2020IEEE Transactions on Industrial Informatics10.1109/TII.2020.2976796
The effect of electron beam sterilization on the physical properties of the bioresorbable polymer coatings on the titanium 6-aluminum 4-vanadium substrateKajzer, W.| Szewczenko, J.| Kajzer, A.| Basiaga, M.| Jaworska, J.| Jelonek, K.| Hercog, A.| Kaczmarek, M.| Marcinkowski, A.| Kasperczyk, J.2020Materialwissenschaft und Werkstofftechnik10.1002/mawe.201900223
Power and frequency control in the national power system of the 370 MW coal fired unit superstructured with a gas turbineBartnik, R.| Buryn, Z.| Hnydiuk-Stefan, A.| Szega, M.| Popławski, T.2020Energies10.3390/en13102432
Generalized Problematic Internet Use Scale 2: Results of Validation on Polish SampleProbierz, E.| Galuszka, A.I.| Galuszka, A.2020IEEE Access10.1109/ACCESS.2020.3004652
The influence of the parameters of the zinc oxide layer deposition process using the atomic layer deposition method on the physical and mechanical properties of 316LVM steelBasiaga, M.| Walke, W.| Sambok-Kiełbowicz, A.| Paszenda, Z.| Kaczmarek, M.| Taratuta, A.| Szindler, M.| Ziębowicz, B.2020Materialwissenschaft und Werkstofftechnik10.1002/mawe.201900232
Photostimulated nonlinear optical switching materials based on CdBr0·95Cl0.1 nanocrystalline layersLakshminarayana, G.| El-Naggar, A.M.| Kityk, I.V.| Gondek, E.| Karasinski, P.2020Physica E: Low-Dimensional Systems and Nanostructures10.1016/j.physe.2020.114059
Exergo-economic and environmental analysis of a solar integrated thermo-electric storageFiaschi, D.| Manfrida, G.| Petela, K.| Rossi, F.| Sinicropi, A.| Talluri, L.2020Energies10.3390/en13133484
Influence of the Number of Thresholds on the Dynamics of Models with Switchings of the Biological SystemsOchab, M.| Puszynski, K.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_50
Tribocorrosion of nanocrystalline 42NiSiMo8-3-7-F steelSkolek, E.| Stachowiak, A.| Wasiluk, K.| Wieczorek, A.N.2020Corrosion Engineering Science and Technology10.1080/1478422X.2020.1742408
Exact and approximate distributed controllability of processes described by KdV and Boussinesq equations: The Green's function approachKlamka, J.| Avetisyan, A.S.| Khurshudyan, A.Z.2020Archives of Control Sciences10.24425/acs.2020.132591
Modelling and production process of the energy harvesting system based on mfc piezoelectric transducersPłaczek, M.2020International Journal of Modern Manufacturing Technologies-
PrefaceMacioszek, E.| Sierpiński, G.2020Advances in Intelligent Systems and Computing-
Redefinition of prefabricated large panel building systems - Face lifting or disruptive revolutionCibis, J.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032006
Model of the planar broadband differential waveguide interferometer as a humidity sensorGut, K.2020Photonics Letters of Poland10.4302/plp.v12i2.1022
Biofeedback therapy application with EEG signal visualization and the optimization of success factor algorithmKielan, P.| Kciuk, M.| Piecyk, J.2020International Journal of Electronics and Telecommunications10.24425-ijet.2020.134018/741
Simulation of Acoustophoretic Separation of Microplastic Particles in mkFluidic Lab-chipMatviykiv, O.| Klymkovych, T.| Bokla, N.| Lobur, M.| Melnyk, M.| Timofiejczuk, A.20202020 IEEE 16th International Conference on the Perspective Technologies and Methods in MEMS Design, MEMSTECH 2020 - Proceedings10.1109/MEMSTECH49584.2020.9109452
An Externally-Linear-Internally-Nonlinear RMS-to-DC converterPil Niak, A.| Kampik, M.2020CPEM Digest (Conference on Precision Electromagnetic Measurements)10.1109/CPEM49742.2020.9191840
Stabilizability of Linear Discrete Time-Varying SystemsBabiarz, A.| Czornik, A.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50936-1_93
Comparative analysis of wind energy generation forecasts in Poland and Portugal and their influence on the electricity exchange pricesRogus, R.| Castro, R.| Sołtysik, M.2020Inventions10.3390/inventions5030035
Collaborative learning with taboos for machine learning methods in big data problemsPolap, D.| Wozniak, M.20202020 IEEE Symposium Series on Computational Intelligence, SSCI 202010.1109/SSCI47803.2020.9308296
Risk-based active power redispatch optimizationWawrzyniak, K.| Padrón, E.U.| Jaworski, W.| Korab, R.2020Energies10.3390/en13030716
Air humidity-induced error in measuring resistance of a carbon fibre strain sensorGórski, M.| Krzywon, R.| Kekez, S.2020Archives of Civil Engineering10.24425/ace.2020.134390
Art and design on the campus of the Silesian University of TechnologyFross, K.| Gumińska, A.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032019
Armature winding analysis for high-temperature superconducting PM-excited AC machinesLasek, P.| Habelok, K.| Stepien, M.2020International Journal of Applied Electromagnetics and Mechanics10.3233/JAE-209523
General rules for rational selection of chemical composition zinc alloys for galvanizing processZasada, J.| Liberski, P.2020Ochrona Przed Korozja10.15199/40.2020.5.2
Measurements in Laboratory Conditions and in Selected Power PlantsPaszek, S.| Boboń, A.| Berhausen, S.| Majka, Ł.| Nocoń, A.| Pruski, P.2020Lecture Notes in Electrical Engineering10.1007/978-3-030-37976-6_7
Effects of countdown timers on traffic safety at signalized intersectionsKłos, M.J.| Sobota, A.| Żochowska, R.| Karoń, G.2020Transactions on Transport Sciences10.5507/TOTS.2020.010
Numerical modeling of heat transfer in biological tissue domain using the fuzzy finite difference methodPiasecka-Belkhayat, A.| Kowalski, P.2020Proceedings of the 6th European Conference on Computational Mechanics: Solids, Structures and Coupled Problems, ECCM 2018 and 7th European Conference on Computational Fluid Dynamics, ECFD 2018-
Flexible hardware approach to multi-core time-predictable systems design based on the interleaved pipeline processingAntolak, E.| Pułka, A.2020IET Circuits, Devices and Systems10.1049/iet-cds.2019.0521
Pneumatic elements of machines toolsWróbel, A.2020International Journal of Modern Manufacturing Technologies-
IntroductionBurczyński, T.| Kuś, W.| Beluch, W.| Długosz, A.| Poteralski, A.| Szczepanik, M.2020Solid Mechanics and its Applications10.1007/978-3-030-34161-9_1
Fabrication of electrospun poly(lactic acid) nanoporous membrane loaded with niobium pentoxide nanoparticles as a potential scaffold for biomaterial applicationsMarins, N.H.| Silva, R.M.| Ferrua, C.P.| Łukowiec, D.| Barbosa, A.M.| Ribeiro, J.S.| Nedel, F.| Zavareze, E.R.| Tański, T.| Carreño, N.L.V.2020Journal of Biomedical Materials Research - Part B Applied Biomaterials10.1002/jbm.b.34503
Architectural design and methods inspired by children's culture and creativity [Global culture and spatial individualization]Małgorzata, B.-Z.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/2/022097
A case study of high power fire and evacuation process in an urban road tunnelKról, A.| Król, M.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-34069-8_16
Stimuli-responsive aliphatic polycarbonate nanocarriers for tumor-targeted drug deliveryDomiński, A.| Konieczny, T.| Duale, K.| Krawczyk, M.| Pastuch-Gawołek, G.| Kurcok, P.2020Polymers10.3390/polym12122890
Wear morphology on the surfaces of CoCrMo unicompartmental knee joint endoprostheses as elements of metal-metal friction nodesSzarek, A.| Stradomski, G.| Łukomska-Szarek, J.| Rydz, D.| Wolański, W.| Joszko, K.2020Materials10.3390/ma13122689
The analysis of surface morphology, band gaps and optical properties of PAN/GO thin filmsMatysiak, W.| Adamczyk, K.2020Archives of Materials Science and Engineering10.5604/01.3001.0014.1190
Use of holt’s model for forecasting until 2023 occupational accidents in the metallurgical industry in PolandMałysa, T.2020Metalurgija-
Comparison of gas sensing properties of reduced graphene oxide obtained by two different methodsDrewniak, S.| Procek, M.| Muzyka, R.| Pustelny, T.2020Sensors (Switzerland)10.3390/s20113175
The influence of calcareous fly ash on the effectiveness of plasticizers and superplasticizersGolaszewski, J.| Ponikiewski, T.| Kostrzanowska-Siedlarz, A.| Miera, P.2020Materials10.3390/ma13102245
Determination of the influence of infrastructural and economic factors on the volume of freight transport on railway lines in PolandKamiński, W.2020Transport Problems10.21307/TP-2020-057
Influence of resistance butt welding thermal cycle on structure and properties of termomechanically rolled steelGórka, J.| Jamrozik, W.| Wygldacz, B.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/916/1/012042
Towards Personalized Radio-Chemotherapy – Learning from Clinical Data vs. Model OptimizationŚwierniak, A.| Śmieja, J.| Fujarewicz, K.| Suwiński, R.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-41964-6_32
A two-stage homogenization for modelling of elastic-plastic functionally graded compositesOgierman, W.2020Engineering Computations (Swansea, Wales)10.1108/EC-09-2019-0432
Fuzzy controller for the treadmill speed adaptation system in mechatronic device for gait reeducationGembalczyk, G.| Duda, S.| Switonski, E.| Mezyk, A.2020Journal of Intelligent and Fuzzy Systems10.3233/JIFS-201111
The modelling of manufacturing systems by means of state machines and agentsFoit, K.2020International Journal of Modern Manufacturing Technologies-
Comparative analysis of time series databases in the context of edge computing for low power sensor networksGrzesik, P.| Mrozek, D.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-50426-7_28
Air friction losses in the PM BLDC motor with external rotor)Krykowski, K.| Hetmańczyk, J.| Gałuszkiewicz, Z.| Gałuszkiewicz, P.2020Przeglad Elektrotechniczny10.15199/48.2020.07.06
Chosen analyses for multi-circuit multi-voltage overhead lines capacitancesKocot, H.| Dziendziel, A.2020Przeglad Elektrotechniczny10.15199/48.2020.08.15
Aspects of Motivation and Engagement of Employees in Their Work Based on the Example of Mining CompaniesKowal, B.| Wyganowska, M.2020International Journal of Electrical and Computer Engineering Systems10.29227/IM-2020-01-80
Control of complex dynamic nonlinear loading process for electromagnetic millOgonowski, S.| Bismor, D.| Ogonowski, Z.2020Archives of Control Sciences10.24425/acs.2020.134674
Use of ytterbium trifluoride in the field of microinvasive dentistry-An in vitro preliminary studySkucha-Nowak, M.| Nowak-Wachol, A.| Skaba, D.| Wachol, K.| Korytkowska-Wałach, A.2020Coatings10.3390/COATINGS10100915
Relationship Between the Thermodynamic Parameters, Structure, and Anticorrosion Properties of Al-Zr-Ni-Fe-Y AlloysBabilas, R.| Łoński, W.| Młynarek, K.| Bajorek, A.| Radoń, A.2020Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science10.1007/s11661-020-05833-x
Nanogenerator for dynamic stimuli detection and mechanical energy harvesting based on compressed SbSeI nanowiresToroń, B.| Mistewicz, K.| Jesionek, M.| Kozioł, M.| Stróż, D.| Zubko, M.2020Energy10.1016/j.energy.2020.118717
Transformation of contaminants of emerging concern (CECs) during UV-catalyzed processes assisted by chlorineKudlek, E.2020Catalysts10.3390/catal10121432
Elements of Probability TheoryStapor, K.2020Intelligent Systems Reference Library10.1007/978-3-030-45799-0_1
Boosting the performance of nano-ni catalysts by palladium doping in flow hydrogenation of sulcatoneGoszewska, I.| Zienkiewicz-Machnik, M.| Błachucki, W.| Kubas, A.| Giziński, D.| Matus, K.| Nikiforow, K.| Lisovytskiy, D.| Śrębowata, A.| Szlachetko, J.| Sá, J.2020Catalysts10.3390/catal10111267
Characterization of the structure and transport properties of Alginate/Chitosan microparticle membranes utilized in the pervaporative dehydration of ethanolDudek, G.| Borys, P.| Strzelewicz, A.| Krasowska, M.2020Polymers10.3390/polym12020411
Roadside infrastructure unit as an autonomous small-sized smart grid holonic approachPanyukova, D.| Sladkowski, A.| Shiryayeva, O.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/972/1/012022
Hydrodechlorination of chclf2 (Hcfc-22) over pd–pt catalysts supported on thermally modified activated carbonRadlik, M.| Juszczyk, W.| Matus, K.| Raróg-Pilecka, W.| Karpiński, Z.2020Catalysts10.3390/catal10111291
Digitally programmable modified current differencing transconductance amplifier in 40-nm technology: Design flow, parameter analyses and applicationsMalcher, A.| Kristof, A.| Pułka, A.2020IET Circuits, Devices and Systems10.1049/iet-cds.2019.0494
Data Augmentation Using Principal Component Resampling for Image Recognition by Deep LearningAbayomi-Alli, O.O.| Damaševičius, R.| Wieczorek, M.| Woźniak, M.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-61534-5_4
The influence of LED lighting on the correctness of indications of electronic energy metersSkorkowski, A.| Kampik, M.2020CPEM Digest (Conference on Precision Electromagnetic Measurements)10.1109/CPEM49742.2020.9191873
Enhanced osteogenic differentiation of human primary mesenchymal stem and progenitor cultures on graphene oxide/poly(methyl methacrylate) composite scaffoldsKrukiewicz, K.| Putzer, D.| Stuendl, N.| Lohberger, B.| Awaja, F.2020Materials10.3390/ma13132991
Using Copula and Quantiles Evolution in Prediction of Multidimensional Distributions for Better Query Selectivity EstimationAugustyn, D.R.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_20
The Baeyer-Villiger rearrangement with metal triflates: new developments toward mechanismLatos, P.| Siewniak, A.| Sitko, M.| Chrobok, A.2020RSC Advances10.1039/d0ra03335a
Present and future of high-temperature superconductor quantum-based voltage standardsKlushin, A.M.| Lesueur, J.| Kampik, M.| Raso, F.| Sosso, A.| Khorshev, S.K.| Bergeal, N.| Couëdo, F.| Feuillet-Palma, C.| Durandetto, P.| Grzenik, M.| Kubiczek, K.| Musiol, K.| Skorkowski, A.2020IEEE Instrumentation and Measurement Magazine10.1109/MIM.2020.9062678
Surface properties enhancement of light alloys by appliance of laser treatmentLabisz, K.| Tański, T.2020Solid State Phenomena10.4028/www.scientific.net/SSP.308.119
Effect of CoSi2 interfacial layer on the magnetic properties of Si|CoSi2|Sm-Co thin filmsSaravanan, P.| Boominathasellarajan, S.| Sobel, B.| Wacławek, S.| Vinod, V.T.P.| Černík, M.2020Journal of Magnetism and Magnetic Materials10.1016/j.jmmm.2019.165716
Effect of Mn addition on serrated plastic flow behaviour in high-strength multiphase steels with retained austeniteKozłowska, A.| Grzegorczyk, B.| Staszuk, M.| Grajcar, A.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/723/1/012017
Heat shock response regulates stimulus-specificity and sensitivity of the pro-inflammatory NF-κB signallingPaszek, A.| Kardyńska, M.| Bagnall, J.| Śmieja, J.| Spiller, D.G.| Widłak, P.| Kimmel, M.| Widlak, W.| Paszek, P.2020Cell Communication and Signaling10.1186/s12964-020-00583-0
Equalising the Levels of Electromobility Implementation in CitiesSierpiński, G.| Macioszek, E.2020Communications in Computer and Information Science10.1007/978-3-030-59270-7_13
The Specificity of Dynamic Resistance of Existing Bridge Structures in Mining AreasMrozek, D.| Mrozek, M.2020International Journal of Civil Engineering10.1007/s40999-020-00571-y
A reliable method for the assessment of occupants’ exposure to CO2Kierat, W.| Melikov, A.| Popiolek, Z.2020Measurement: Journal of the International Measurement Confederation10.1016/j.measurement.2020.108063
Application of the FPAA to sample input signal for laboratory exercise: Pulse amplitude modulationGrzechca, D.| Chruszczyk, L.2020International Journal of Electronics and Telecommunications10.24425/ijet.2019.130261
Removal of deflection and reconstruction of foundations of the historic museum buildingGromysz, K.| Orwat, J.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032051
A possible role for arylsulfatase g in dermatan sulfate metabolismPoterala-Hejmo, A.| Golda, A.| Pacholczyk, M.| Student, S.| Tylki-Szymańska, A.| Lalik, A.2020International Journal of Molecular Sciences10.3390/ijms21144913
Low band gap donor-acceptor-donor compounds containing carbazole and naphthalene diimide units: Synthesis, electropolymerization and spectroelectrochemical behaviourRybakiewicz, R.| Ganczarczyk, R.| Charyton, M.| Skorka, L.| Ledwon, P.| Nowakowski, R.| Zagorska, M.| Pron, A.2020Electrochimica Acta10.1016/j.electacta.2020.136922
The effect of extrusion in the complex strain state on the microstructure and mechanical properties of MgAlZn magnesium alloysBednarczyk, I.| Kuc, D.| Tomaszewska, A.| Tkocz, M.2020Archives of Metallurgy and Materials10.24425/amm.2020.133228
Temperature and pH-dependent response of poly(Acrylic Acid) and poly(Acrylic Acid-co-Methyl Acrylate) in highly concentrated potassium chloride aqueous solutionsSinek, A.| Kupczak, M.| Mielańczyk, A.| Lemanowicz, M.| Yusa, S.-I.| Neugebauer, D.| Gierczycki, A.2020Polymers10.3390/polym12020486
Chain extender effect of 3-(4-hydroxyphenyl)propionic acid/layered double hydroxide in biopolyesters containing the succinate moietySisti, L.| Celli, A.| Marek, A.A.| Verney, V.| Leroux, F.| Totaro, G.2020New Journal of Chemistry10.1039/c9nj06322f
Collation efficiency of poly(vinyl alcohol) and alginate membranes with iron-based magnetic organic/inorganic fillers in pervaporative dehydration of ethanolDudek, G.| Turczyn, R.| Djurado, D.2020Materials10.3390/ma13184152
Optimizing Training Data and Hyperparameters of Support Vector Machines Using a Memetic AlgorithmDudzik, W.| Kawulok, M.| Nalepa, J.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-31964-9_22
BioTest - Remote Platform for Hypothesis Testing and Analysis of Biomedical DataPsiuk-Maksymowicz, K.| Jaksik, R.| Placzek, A.| Gruca, A.| Student, S.| Borys, D.| Mrozek, D.| Fujarewicz, K.| Swierniak, A.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-29885-2_14
The design and analysis of material handling systems using simulationKrenczyk, D.| Kalinowski, K.| Ćwikła, G.| Kempa, W.| Grabowik, C.| Paprocka, I.2020International Journal of Modern Manufacturing Technologies-
A study on material properties of intermetallic phases in a multicomponent hypereutectic al-si alloy with the use of nanoindentation testingTupaj, M.| Orłowicz, A.W.| Mróz, M.| Trytek, A.| Dolata, A.J.| Dziedzic, A.2020Materials10.3390/ma13245612
Hot deformation treatment of grain-modified mg–li alloyKról, M.| Snopiński, P.| Pagáč, M.| Hajnyš, J.| Petrů, J.2020Materials10.3390/ma13204557
Video-based distance estimation for a stream of vehiclesCzapla, Z.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-34069-8_22
The Influence of Microstructure on Corrosion Resistance of Mg-3Al-1Zn-15Li (LAZ1531) AlloyDobkowska, A.| Adamczyk-Cieślak, B.| Towarek, A.| Maj, P.| Ura-Bińczyk, E.| Momeni, M.| Kuc, D.| Hadasik, E.| Mizera, J.2020Journal of Materials Engineering and Performance10.1007/s11665-020-04775-0
Pollutant emissions, performance and combustion behaviour assessment of an Si gas engine fuelled with Lcv gas containing carbon monoxide and hydrogen diluted by nitrogenPrzybyła, G.| Nadaleti, W.2020International Journal of Hydrogen Energy10.1016/j.ijhydene.2019.12.117
Future Graduate Salaries Prediction Model Based on Recurrent Neural NetworkSilka, J.| Wieczorek, M.| Wozniak, M.2020Proceedings of the 2020 Federated Conference on Computer Science and Information Systems, FedCSIS 202010.15439/2020F52
Analysis of Frequency-Dependent Component of AC - DC Transfer Difference of a Modified Calorimetric Thermal ConverterKubiczek, K.| Kampik, M.| Grzenik, M.2020CPEM Digest (Conference on Precision Electromagnetic Measurements)10.1109/CPEM49742.2020.9191740
PrefaceSładkowski, A.2020Lecture Notes in Networks and Systems-
Improvement of the properties of Ti6Al7Nb titanium alloy in terms of the type of surface modificationWoźniak, A.| Bialas, O.| Adamiak, M.2020Archives of Metallurgy and Materials10.24425/amm.2020.132813
The completion of generalized b-metric spaces and fixed pointsCobzaş, Ş.| Czerwik, S.2020Fixed Point Theory10.24193/fpt-ro.2020.1.10
Prospects of ocean-based renewable energy for West Africa’s sustainable energy futureAdesanya, A.| Misra, S.| Maskeliunas, R.| Damasevicius, R.2020Smart and Sustainable Built Environment10.1108/SASBE-05-2019-0066
Carbazole modified oligonucleotides: Synthesis, hybridization studies and fluorescence propertiesGouda, A.S.| Przypis, L.| Walczak, K.| Jørgensen, P.T.| Wengel, J.2020Organic and Biomolecular Chemistry10.1039/d0ob01553a
Electromagnetic switching transients in transmission line cooperating with the local subsystemSowa, P.| Macha, D.2020International Journal of GEOMATE10.21660/2020.72.5781
Fast and efficient piezo/photocatalytic removal of methyl orange using sbsi nanowiresMistewicz, K.| Kępińska, M.| Nowak, M.| Sasiela, A.| Zubko, M.| Stróż, D.2020Materials10.3390/ma13214803
Corrosion resistance, structure and properties of austenitic tig weld jointsPoloczek, T.| Górka, J.| Kotarska, A.| Kciuk, M.2020International Journal of Modern Manufacturing Technologies-
P&R parking and bike-sharing system as solutions supporting transport accessibility of the cityMacioszek, E.| Kurek, A.2020Transport Problems10.21307/TP-2020-066
Automation and robotization of underground mining in PolandBołoz, Ł.| Biały, W.2020Applied Sciences (Switzerland)10.3390/app10207221
A city game: Guidelines and recommendations for contemporary urban policyMazur-Belzyt, K.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/4/042014
Resistance of young concrete on frost action at early age Part 1 – Compressive strengthOsetek, W.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/4/042040
Regression methods for detecting anomalies in flue gas desulphurization installations in coal-fired power plants based on sensor dataMoleda, M.| Momot, A.| Mrozek, D.2020Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)10.1007/978-3-030-50426-7_24
Remarks on quasi-static and interlaminar fracture toughness tests of composite structuresWronkowicz-Katunin, A.| Katunin, A.| Danek, W.2020Procedia Structural Integrity10.1016/j.prostr.2020.04.004
Modelling of the guillotine cutting process by means of a symmetrical blade with the defined geometryKaczmarczyk, J.2020Materials10.3390/ma13235404
Analysis of a damaged bridge object as a result of vehicle impactSliwka, A.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/4/042052
Comparative analysis of diagnostic methods based on partial discharges measurement of the MV porcelain bushingWróblewski, W.| Duda, D.| Maciążek, M.2020Przeglad Elektrotechniczny10.15199/48.2020.02.07
Review of additive manufacturing methodsGrzegorz Gaweł, T.2020Solid State Phenomena10.4028/www.scientific.net/SSP.308.1
Simple clipboard malware attack detection and analysis from the user-machine interaction viewWieczorek, M.2020CEUR Workshop Proceedings-
The study on the model orientation angle for accuracy of elements made with rapid prototyping fdm methodDyrbuś, G.2020International Journal of Modern Manufacturing Technologies-
Pressure-assisted strategy for the synthesis of vinyl pyrrolidone-based macro-star photoiniferters. A route to star block copolymersMaksym, P.| Tarnacka, M.| Bernat, R.| Bielas, R.| Mielańczyk, A.| Hachuła, B.| Kaminski, K.| Paluch, M.2020Journal of Polymer Science10.1002/pol.20200037
Concept of non-friction-based CVTMalaka, J.| Hetmańczyk, M.2020International Journal of Modern Manufacturing Technologies-
Selected aspects of wind power plant operation in the power systemLange, A.| Pasko, M.2020Proceeding of the International Conference on Electrical Power Quality and Utilisation, EPQU10.1109/EPQU50182.2020.9220302
Experimental research possibilities of monitoring the AWJ cutting process using a strain sensorLis, K.| Wala, T.2020International Journal of Modern Manufacturing Technologies-
Effect of carrier drift-diffusion transport process on thermal quenching of photoluminescence in GaNMatys, M.| Adamowicz, B.| Kachi, T.| Hashizume, T.2020Journal of Physics D: Applied Physics10.1088/1361-6463/abc041
Data system model for easy human-machine interactions over communication interfacesZielonka, A.| Sikora, A.| Wozniak, M.2020Proceedings - 4th IEEE International Conference on Robotic Computing, IRC 202010.1109/IRC.2020.00096
Study of the stiffness of the bitumen emulsion based cold recycling mixes for road base coursesKonieczna, K.| Pokorski, P.| Sorociak, W.| Radziszewski, P.| Żymełka, D.| Król, J.B.2020Materials10.3390/ma13235473
Transformation of the lower lusatia landscape in the context of climate and energy changePancewicz, A.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/3/032041
Fluid dynamic and thermal comfort analysis in an actual operating room with unidirectional airflow systemMassarotti, N.| Mauro, A.| Mohamed, S.| Nowak, A.J.| Sainas, D.2020Building Simulation10.1007/s12273-020-0713-3
Collective transport as a tool to reduce congestion - Case studyMidor, K.| Biały, W.| Ivanova, T.N.2020IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/971/5/052063
The sustainable business model of health resort enterprise and the role of education in pro-ecological behaviorSzromek, A.R.2020Advances in Intelligent Systems and Computing10.1007/978-3-030-50896-8_22
Revealing Topological Influence of Phenylenediamine Unit on Physicochemical Properties of Donor-Acceptor-Donor-Acceptor Thermally Activated Delayed Fluorescent MacrocyclesIzumi, S.| Nyga, A.| de Silva, P.| Tohnai, N.| Minakata, S.| Data, P.| Takeda, Y.2020Chemistry - An Asian Journal10.1002/asia.202001173
Lithium perrhenate catalyst for carbon aerogel-based supercapacitorCiszewski, M.| Koszorek, A.| Osadnik, M.| Szleper, K.| Drzazga, M.| Leszczyńska-Sejda, K.2020SN Applied Sciences10.1007/s42452-020-2619-1
Numerical and experimental analysis of balloon angioplasty impact on flow hemodynamics improvementTomaszewski, M.| Sybilski, K.| MaŁachowski, J.| WolaŃski, W.| Buszman, P.P.2020Acta of bioengineering and biomechanics-
Answer set programming for regular inferenceWieczorek, W.| Jastrzab, T.| Unold, O.2020Applied Sciences (Switzerland)10.3390/app10217700
Surface modification methods of ceramic filler in ceramic-carbon fibre composites for bioengineering applications - A systematic reviewNakonieczny, D.S.| Antonowicz, M.| Paszenda, Z.2020Reviews on Advanced Materials Science10.1515/rams-2020-0024
Highly active trifloaluminate ionic liquids as recyclable catalysts for green oxidation of 2,3,6-trimethylphenol to trimethyl-1,4-benzoquinoneLatos, P.| Siewniak, A.| Barteczko, N.| Jurczyk, S.| Boncel, S.| Chrobok, A.2020Catalysts10.3390/catal10121469
Concept Drift and Avoiding its Negative Effects in Predictive Modeling of Failures of Electricity Production Units in Power PlantsMoleda, M.| Momot, A.| Mrozek, D.2020Proceedings - IEEE Computer Society's Annual International Symposium on Modeling, Analysis, and Simulation of Computer and Telecommunications Systems, MASCOTS10.1109/MASCOTS50786.2020.9285972
Overview of safety at rail-road crossings in Poland in 2008-2018Macioszek, E.| Kurek, A.| Kowalski, B.2020Transport Problems10.21307/TP-2020-048

© Silesian University of Technology

General information clause on the processing of personal data by the Silesian University of Technology

The authors - the organizational units in which the information materials were produced, are fully responsible for the correctness, up-to-date and legal compliance with the provisions of the law. Hosted by: IT Center of the Silesian University of Technology ()

Rules for the use of "cookies" on the websites of the Silesian University of Technology

Data availability statement

„E-Politechnika Śląska - utworzenie platformy elektronicznych usług publicznych Politechniki Śląskiej”

Fundusze Europejskie
Fundusze Europejskie
Fundusze Europejskie
Fundusze Europejskie